1)      Fundamentals on thermal spraying including splat formation and quantitative characterization of lamellar microstructure by visualization of the pore-net inherent to thermal spray coating, coating formation mechanisms, development and controlling of microstructure of the coating;

2)      Cold spraying for development of potential superhard cermet coatings, intermetallic coating, cost-effective bond coat for TBCs, and nanostructured coatings, fully dense corrosion-resistant alloy coatings

3)      Plasma spraying for design and creation of new generation thermal barrier coatings (TBCs);

4)      Nano-structured functional ceramics preforming and Assembly by nano- and submicrometers ceramics particles by Vacuum cold spraying

5)      HVOF (High velocity oxy-fuel) for high performance cermet coating;

6)      Solid oxide fuel cell (SOFC) fabrication by thermal spray processes;

7)      Dye-sensitized solar cell (DSC) assembly by newly developed Vacuum cold spray system

8)      Re-manufacturing and additive manufacturing via thermal or cold spray processes

07/2005-09/2005   Université de technologie Belfort-Montbéliard, Guest Professor  

09/2001-12/2001   Université de technologie Belfort-Montbéliard, Guest Professor  

05/2001-06/2001    Nanyang Technological University, Guest Professor  

09/1998－02/1999  Joining and Welding Research Institute, Osaka University, Guest Professor   

05/1998-06/1998    Université de technologie Belfort-Montbéliard, Guest Professor  

01/1997 – 02/1997 Nagoya Industrial Science Science Institute, Japan, Visiting Researcher   

07/1996-10/1996   Joining and Welding Research  Institute (JWRI) of Osaka University, Guest Professor   

12/1992-so far       Xi’an Jiaotong University(1993.9：PhD supervisor), Professor 

09/1992-12/1992   Xi’an Jiaotong University, Lecturer 

11/1989-09/1992   Japan Kinki High-Energy Processing Technology Research Institute, Research fellow  

10/1978－07/1982      Welding Process and Equipment, Department of Mechanical Engineering in Xi’an Jiaotong University, B.S.  

08/1982－09/1983      Graduate Trainee for abroad studying in Xi’an Jiaotong University

02/1983－09/1983      Japanese Language Trainee in Dalian University of Foreign Languages

10/1983－03/1984      Research Student preparing for Graduate School of Engineering in JWRI of Osaka University

04/1984－03/1986     Graduate School of Engineering of Osaka University, MESc.

04/1986－10/1989     Graduate School of Engineering of Osaka University,PhD

In 1994, entry to the Trans-Century Programmer of Ministry of Education of China for Young Talent award.

In 2004, confered to the First grade Awards of Shannxi Province Government: “the characterization of plasma-sprayed ceramic coatings”, by Shaanxi Province Government

In 2004, confered to the Second grade Nomination Award of National Nature Science, for the achievements on the HVOF spray coating, by the Ministry of the Education of China.

In 2007, Entry to the National Natural Science Funds Awards for the distinguished Young Scientist in China

In 2009, as the leading PI, his teem successfully entered the Program for Changjiang Scholars and Innovative Research Team in University supported by the Ministry of Education of China,

In 2008, confered to the National Nature Science Award in the second grade: “the fundamental research achievements on thermal spray coating formation mechanisms, microstructure characterization and relationship between coating microstructure and properties”, by Chinese Government. 

1.         Y.Arata, A.Ohmori and C.-J. Li, 1986, Basic study on properties of plasma sprayed ceramic coatings, Trans. Jpn. Weld. Res. Inst., Vol.15, pp.339-348.

2.         Y.Arata, A.Ohmori and C.-J. Li, 1987, Characteristics of metal electroplating to plasma sprayed ceramic coatings, Trans. Jpn. Weld. Res. Inst., Vol.16, pp.259-265.

3.         Y.Arata, A.Ohmori and C.-J. Li, 1988, Electrochemical method to evaluate the connected porosity in ceramic coatings, Thin Solid Films, Vol.156, pp.315-325.

4.         荒田吉明，大森明，李长久, 1988, アルミナ溶射皮膜の物性と构造，日本高温学会志，Vol.14, pp.220-233, (In Japanese).

5.         Y.Arata, A.Ohmori and C.-J. Li, 1988, Fracture Behaviour of plasma sprayed ceramic coatings in scratch test, Trans. Jpn. Weld. Res. Inst., Vol.17, pp.311-315.

6.         大森明，李长久， 荒田吉明，井上敬胜，岩本信也，1990, アルミナ溶射皮膜の贯通气孔率の皮膜构造依存性，（日本）高温学会志，Vol.16, (Supplement), pp.332-340, (In Japanese).

7.         A.Ohmori， C.-J. Li and Y.Arata, 1990, Influence of plasma spray conditions on the structure of Al₂O₃ coatings, Trans. Jpn. Weld. Res. Inst., Vol.19, pp.259-270.

8.         A.Ohmori and C.-J. Li, 1991, Quantitative characterization of the structure of plasma sprayed Al₂O₃ coating by using copper electroplating, Thin Solid Films, Vol.201, pp.241-252.

9.         谷和美，原田良夫，李长久，1995, WC-Co系溶射皮膜形成における粒子扁平化とその积层构造，日本金属学会志，Vol.59(No.11), pp.1130-1135 (In Japanese).

10.     C.-J. Li, A.Ohmori and Y.Harada, 1996, Effect of powder structure on the structure of thermally sprayed WC-Co coatings, Journal of Materials Science, Vol.31, pp.785-794.

11.     C.-J. Li, A.Ohmori and Y.Harada, 1996, Formation of an amorphous phase in thermally sprayed WC-Co, Journal of Thermal Spray Technology, Vol.5, pp.69-73.

12.     C.-J. Li, and A.Ohmori, 1996, The lamellar structure of a detonation gun sprayed Al2O3 coating, Surface and Coating Technology, Vol.82,  pp.254-258.

13.     C.-J. Li, A.Ohmori and R.McPherson, 1997, The relationship between microstructure and Young's modulus of thermally sprayed ceramic coatings, Journal of Materials Science, Vol.32, pp.997-1004.

14.     A.Ohmori, K.Yoshida and C.-J. LI, 1997，Characterization of graded Ti silicide coatings formed by thermal diffusion treatment of low pressure plasma sprayed silicon coating on titanium substrate, Trans. of Joining and Welding Research Institute, Vol.26 (No.2) pp.35-41.

15.     园家启嗣，李长久，纪岗昌，王豫跃，1998, 高速ガスフレ-ム溶射によるCr3C2-NiCr皮膜の物性に及ぼす溶射条件の影响，溶接学会論文集，Vol.16 (No.1), pp. 25-34.

16.     A.Ohmori, N.Ohnishi, C.-J. LI and H.Shoyama, 1998, Characterization of the structure of plasma-sprayed metallic silicide coatings, Trans. of Joining and Welding Research Institute, Vol.27 (No.2), pp.47-52.

17.     C.-J. Li, K. Sonoya, G.-C. Ji and Y.-Y Wang, 1998, Effect of spray conditions on the properties of HVOF Cr3C2-NiCr coatings, Welding in the World, Vol.41 No.2, pp.77-87.

18.     C.-J. Li, A.Ohmori and K.Tani, 1999, Effect of WC particle size on the abrasive wear of thermally sprayed WC-Co coatings, Materials and Manufacturing Processes, Vol.14 (No.2), pp.175-184.

19.     C.-J. Li, H. Yang, H. Li, 1999, Effect of gaseous conditions on HVOF flame and property of WC-Co coatings, Materials and Manufacturing Processes, Vol.14 (3), pp.383-395.

20.     C.-J. Li, K.Sonoya and F.-H.Li, 2000，Study of influence of plasma spray conditions on the mechanical properties of Ni-50%Cr coatings, by orthogonal experimental design, Welding In the World, Vol.44, No.3, pp.22-28.

2001

21.     K. Sonoya, C.-J. Li and F.-H. Li, 2001, Study of relationships between microstructure and mechanical properties of plasma-sprayed Ni-50Cr coatings and spray parameters, Quarterly Journal of Japan Welding Society, Vol.19(1) 27-36 (In Japanese)

22.      C.-J. Li, Y.Y. Wang, T. Wu and G.C. Ji, Effect of types of ceramic materials in aggregated powder on the adhesive strength of HVOF cermet coating, Surface & Coating Technology, Volume: 145, Issue: 1-3, August 1, 2001, pp. 113-120

2002

23.     C.-J. Li and A. Ohmori, Relationship between the structure and properties of thermally sprayed deposits, Journal of Thermal Spray Technology, Vol.11, No.3 (2002)365-374.

24.     C.-J. Li and Y.-Y. Wang, Effect of particle state on the adhesive strength of HVOF sprayed metallic coating, Journal of Thermal Spray Technology, Vol.11(4)(2002)523-529.

25.     C.-J. Li, G.-C. Ji, Y.-Y. Wang and K. Sonoya, The dominant mechanism of carbon loss during HVOF spraying of Cr3C2-NiCr, Thin Solid Films, Vol.419 (2002)137-143.

2003

26.     C.-J. Li, W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surface & Coating Technology, Vol.167 No.2-3（2003）pp.278 – 283.

27.     C.-J. Li, W.-Y. Li, Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during HVOF deposition, Surface & Coating Technology, V.162 (2003)21-41.

28.     C.-J. Li, G.-J. Yang and Z. Wang, Formation of nano-structured TiO2 by flame spraying with liquid feedstock, Materials Letter, Vol.57(No.13-14), 2003, pp.2130-2134.

29.     C.-J. Li, T. Wu and C.-X. Li, Effect of particle trajectories on the thermal radiation signal emitted by thermal spray particle for the simultaneous measurement of particle parameters, Journal of Thermal Spray Technology, Vol.12(1) ( 2003) 80-94.

30.     C.-J. Li, W.-Z. Wang and Y. He, Measurement of fracture toughness of plasma-sprayed Al2O3 coatings using a tapered double beam method, J. Amer. Ceram. Soc., 2003, Vol.86 (8) 1437-39.

31.     Keiji Sonoya, Chang-Jiu Li and Gang-Chang Ji, Relationship between the microstructure and properties of HVOF sprayed Cr3C2-NiCr coatings, Quarterly J. Japan Welding Society, 2003, Vol.21(No.1), 2003, pp.109-115 (In Japanese).

32.     Chang-Jiu Li, Guan-Jun Yang and Akira Ohmori, Potential strengthening of erosion performance of plasma-sprayed Al₂O₃ coating by adhesives Impregnation, Journal of Materials Science Letters, Vol.22, 2003, 1499-1501.

2004

33.     Guan-Jun Yang, Chang-Jiu Li, Fen Han, and Akira Ohmori, Microstructure and photocatalytic performance of HVOF sprayed TiO₂ coatings, Thin Solid Films, 2004, Vol 466/1-2 pp 81-85.

34.     Chang-Jiu Li and Jing-long Li, Evaporated-gas-induced splashing model for splat formation during plasma spraying, Surface & Coatings Technology, 2004, Vol 184/1 pp 13-23.

35.     Chang-Jiu Li, Cheng-Xin Li and Xian-Jin Ning, Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet Supported Tubular SOFC, Vacuum, 2004, Vol 73/3-4 pp 699-703

36.     F.-X Ye, A. Ohmori and C.-J. Li, New approach to enhance the photocatalytic activity of plasma sprayed TiO₂ coatings using p-n junctions, Surface & Coatings Technology, 2004, Vol 184/2-3 pp 233-238.

37.     Chang-Jiu Li, Wei-Ze Wang, Quantitative characterization of lamellar microstructure of plasma-sprayed ceramic coatings through visualization of Voids Distribution, Materials Science and Engineering A, 2004, Vol 386/1-2 pp 10-19

38.     LI Chang-Jiu, LI Wen-ya, Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14,special 2 (special issues for the International Conference on Surface Engineering, 2004), (2004)49-54.

39.     LI Wen-ya, LI Chang-Jiu, Optimization of spray conditions in cold spraying based on the numerical analysis of particle velocity, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14, special 2 (special issues for the International Conference on Surface Engineering, 2004), (2004)43-48.

40.     C.-J. Li, W.-Z. Wang and Y. He, Dependency of fracture toughness of plasma-spray Al2O3 coatings on lamellar structure, J. Thermal Spray Technol., 2004, Vol.13(3)425-431

41.     Chang-Jiu Li, Yu-Yue Wang, Guan-Jun Yang, Akira Ohmori, K.A. Khor, Effect of solid carbide particle size on deposition behavior, microstructure and wear performance of HVOF cermet coatings, Materials Science and Technology, 2004. 20 (9): 1087-1096 SEP 2004

42.     Chang-Jiu Li and Bo Sun, Microstructure and Property of Micro-Plasma-Sprayed Cu Coating, Materials Science and Engineering A, 2004, Vol 379/1-2 pp 92-101

43.     C.-J. Li and J.-L. Li; Transient contact pressure during flattening of thermal spray droplet and its effect on splat formation; Journal of Thermal Spray Technology, Vol.13(No.2) (2004) 229-238.

44.     Chang-Jiu Li and Bo Sun, Effects of spray parameters on the microstructure and property of Al₂O₃ coatings sprayed by a low power plasma torch with a novel hollow cathode, Thin Solid Films, 2004, 450/2 pp. 282-289

45.     Wei-Ze Wang, Chang-Jiu Li and Fu-Xing Ye, Effect of specimen geometry on fracture toughness measurement of plasma-sprayed ceramic coatings by the tapered cantilever beam approach, Vacuum, 2004, Vol.73/3-4 pp 649-654

46.     Guan-Jun Yang, Chang-Jiu Li, Feng Han and Xin-Chun Huang, Effects of annealing treatment on microstructure and photo-catalytic performance of nanostructured TiO₂ Coatings flame-sprayed with liquid feedstocks, J. Vaccum Sci. & Technol. B, 22(5)(2004)2364-2368

47.     WANG Yu-yue, LI Chang-Jiu, MA Jian, YANG Guan-jun, Effect of flame conditions on the abrasive wear performance of HVOF sprayed nanostructured WC-12Co coatings, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14, special 2 (special issues for the International Conference on Surface Engineering, 2004), (2004)72-76.

48.     Chang-Jiu Li and Bo Sun, Microstructure and Property of Al2O3 coating micro-plasma sprayed using a novel hollow cathode torch, Materials Letters, 2004，Vol 58/1-2 pp 179-183.

49.     Chang-Jiu Li, Yu-Yue Wang, Hua Li, Effect of nano-crystallization of HVOF-sprayed NiCrBSi alloy on properties of coatings, J. Vaccum Sci. & Technol. A, 22(5)(2004)2000-2004.

50.     Fuxing Ye, A Ohmori, Chang-Jiu Li， Formation of p-n junction by plasma spraying technique to enhance the photocatalytic activity of TiO₂，Journal of Materials Science, Vol.39(2004) 353-355

51.     YANG Guan-jun, LI Chang-Jiu, WANG Yu-yue, Effect of substrate materials on the rutile crystalline orientation in plasma-sprayed TiO₂ coatings, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14, special 2 (special issues for the International Conference on Surface Engineering, 2004), (2004)62-66.

2005

52.     Chang-Jiu Li, Wen-Ya Li, Yu-Yue Wang, Formation of metastable phases in cold-sprayed soft metallic deposit, Surface and Coatings Technology, Vol.198(2005)469-473.

53.     Chang-Jiu Li, Xian-Jin Ning and Cheng-Xin Li, Effect of Densification Process on the Properties of Plasma-Sprayed YSZ Electrolyte coatings for Solid Oxide Fuel Cell, Surface and Coatings Technology, Vol.190(2005)60-64

54.     Chang-Jiu Li, Han-Lin Liao. P. Gougen, G. Montovon, C. Coddet, Experimental determination of the relationship between flattening degree and Reynolds number for spray molten droplets, Surface & Coatings Technology, 2005, Vol 191/2-3 pp 375-383

55.     Chang-Jiu Li, Wen-Ya Li, Yu-Yue Wang, Guan-Jun Yang, H. Fukanuma, A theoretical model for prediction of deposition efficiency in cold spraying, Thin Solid Films, Vol.489(2005) 79-85.

56.     Y.-Y. Wang, C.-J. Li, Effect of substrate surface conditions on the bonding mechanism of HVOF coatings, Thin Solid Films, Vol.485(2005)141-147.

57.     Chang-Jiu Li, Cheng-Xin Li, Min Wang, Effect of Spray Parameters on the Electrical Conductivity of Plasma-Sprayed La_1-xSr_xMnO₃ coating for the cathode of SOFCs, Surface and Coatings Technology, Vol.198(2005)278-282

58.     Guan-Jun Yang, Chang-Jiu Li, Yu-Yue Wang, Phase Formation of Nano-TiO2 Particles during Flame Spraying with Liquid Feedstock, Journal of Thermal Spray Technology, Vol.14 (4) (2005)480-486.

59.     Wenya Li, Chang-Jiu Li, Optimal design of a novel cold spray gun nozzle at a limited space, Journal of Thermal Spray Technology, Vol.14(3), 2005, 391-396.

60.     Fu-Xing Ye, A. Ohmori, C.-J. Li, Photoresponse and donor concentration of plasma sprayed TiO2 and TiO2-ZnO electrodes, Journal of Thermal Spray Technology，Vol.14 (4) (2005)530-535.

2006

61.     Yu-Yue Wang，Chang-Jiu Li, Akira Ohmori, Examination of factors controlling bonding strength of HVOF sprayed coatings, Surface & Coatings Technology, Vol.200(2006)2923-2928.

62.     Keiji Sonoya, Chang-Jiu Li, Wei-Ze Wang, Fracture toughness of plasma sprayed YSZ coatings, Quarterly Journal of Japan Welding Society, Vol.24 (2006) 65-69. (in Japanese)

63.     Chang-Jiu Li, Guan-Jun Yang; Akira Ohmori, Relationship between particle erosion and lamellar microstructure for plasma sprayed alumina coatings, Wear, 260(2006)1166-1172.

64.     Wen-Ya Li, Chang-Jiu Li, Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating, Journal of Thermal Spray Technology, Vol.15(2) (2006)206-211. (SCI 收录，EI收录)

65.     Chang-Jiu Li, Wen-Ya Li, Examination of the critical velocity for deposition of particles in cold spraying, Journal of Thermal Spray Technology, Vol.15(2) (2006)212-222. (SCI 收录，EI收录).

66.     Xian-Jin Ning, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating, Vacuum 80 (2006) 1261–1265

67.     H. Li, S. Costil, H.-L. Liao, C.-J. Li, M. Planche, C. Coddet, Effects of surface conditions on the flattening behavior of plasma sprayed Cu splat, Surface Coating Technology, 200 (2006) 5435 – 5446

68.     Gang-Chang Ji, Chang-Jiu Li, Yu-Yue Wang，Microstructural characterization and Abrasive wear performance of HVOF sprayed Cr3C2-NiCr coating, Surface & Coatings Technology 200 (2006) 6749–6757.

69.     Wei-Ze Wang, Chang-Jiu Li, Yu-Yue Wang, Guan-Jun Yang, K. Sonoya, Elastic Behavior of Plasma-Sprayed Ni-Cr coatings, Surface & Coatings Technology,  201(2006) 842-847

70.     Xian-jin Ning, Chang-Jiu Li, Cheng-xin Li, Modification of microstructure and electrical conductivity of plasma-sprayed YSZ deposit through post-infiltration process, Materials Science and Engineering A 428 (2006) 98–105.

71.     Chang-Jiu Li, Guan-Jun Yang, Yu-Yue Wang, Cheng-Xin Li, Phase formation during deposition of TiO₂ coatings through high velocity oxy-fuel spraying, Mater. Trans. Vol.47 (7) (2006) 1690-1696

72.     Cheng-Xin Li, Chang-Jiu Li, Min Gao, Wei Zhou, Guan-jun Yang, Yu-yue Wang, Characterization of the microstructure and electrical conductivity of plasma-sprayed La_0.5Sr_0.5CoO₃ coating, Mater. Trans., Vol.47 (7) (2006) 1654-1657

73.     Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Guang-Jian Liu, Guan-Jun Yang，Ling-Zi Zhang, Preliminary study of Performance of Dye-sensitized Solar Cell of nano-TiO₂ Coating Deposited by Vacuum Cold Spraying, Mater. Trans., Vol.47 (7) (2006) 1703-1709

74.     Wei-Ze Wang, Chang-Jiu Li, Yu-Yue Wang, Effect of spray distance on the mechanical properties of plasma sprayed Ni-Cr coatings, Mater. Trans., Vol.47 (7) (2006) 1643-1648.

75.     Y.-Y. Wang, C.-J. Li, K. Kusumoto, G.-J. Yang, Deposition Behaviors of Solid Phase in Liquid-Solid Two-Phase Particles in High Velocity Oxy-Fuel Spraying, Mater. Trans.，Vol.47 (7) (2006) 1684-1689

76.     Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ya-Zhe Xing, Xin-Jin Ning, Chao Zhang, Han-Lin Liao, C. Coddet, Characterization of Atmospheric Plasma-Sprayed Sc2O3-ZrO2 electrolyte coating, Solid State Ionics, 177 (2006) 2149–2153

77.     Chang-Jiu Li, Cheng-Xin Li, Ya-Zhe Xing, Min Gao, Guan-Jun Yang, Effect of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC, Solid State Ionics, 177 (2006) 2065–2069

78.     Wen-Ya Li, Hanlin Liao, Hong-Tao Wang, Chang-Jiu Li, Ga Zhang, C. Coddet, Optimal design of a convergent-barrel cold spray nozzle by numerical method, Applied Surface Science, 2006, 253(2006) 708-713.

79.     Wen-Ya Li, Hanlin Liao, Chang-Jiu Li, Gang Li, Christian Coddet, Xiaofang Wang, On high velocity impact of micro-sized metallic particles, Applied Surface Science, 253(2006) 2852-2862.

80.     Chang-Jiu Li, Cheng-Xin Li, Ya-Zhe Xing, Ying-Xin Xie, Hui-Guo Long, Influence of the characteristics of stabilized zirconia electrolyte on the performance of cermet supported tubular SOFCs, Rare Metals, Vol. 25 (2006) 273-279.(special issue)

81.     Sheng-Qiang Fan, Chang-Jiu Li, Guan-Jun Yang, Ling-Zi Zhang, Influence of TiCl4 Treatment on Performance of Dye-sensitized Solar Cell Assembled with Nano-TiO2 Coating Deposited by Vacuum Cold Spraying, Rare Metals, Vol. 25 (2006) 163-168 (special issue)

82.     Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Yu-Yue Wang, Examination of Substrate Surface Melting-Induced Splashing during Splat Formation in Plasma Spraying, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 717-724

83.     Sheng-Qiang, Fan, Guan-Jun Yang, Guang-Jian Liu, Cheng-Xin Li, Chang-Jiu Li, Ling-Zi Zhang, Characterization of Microstructure of TiO2 Coating Deposited by Vacuum Cold Spraying, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 513-517.

84.     Wen-Ya Li, Hee-Seon Bang, Chang-Jiu Li, Hong-Tao Wang, Cheng-Xin Li, Measurement and numerical simulation of particle velocity in cold spraying, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 559-562.

85.     Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Yu-Yue Wang, Xin-Chun Huang, Effect of Cu+2 ion doping on photocatalytic performance of liquid flame sprayed TiO2 coatings, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 582-586

86.     C. Zhang, H. Liao, C.-J. Li, W.-Y. Li, G. Zhang, C.-X. Li, X.-J. Ning, C. Coddet, Characterization of YSZ Solid Oxide Fuel Cells Electrolyte Deposit by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying, Journal of Thermal Spray Technology, Vol.15 (No.4), 2006, 598-603.

2007

87.     W.-Y. Li, C. Zhang, H.-T. Wang, X.P. Guo, H.L. Liao, C.-J. Li, C. Coddet, Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying, Applied Surface Science, Vol.253(7) (2007) 3557-3562

88.     Wen-Ya Li, Chao Zhang, Xueping Guo, Jinlin, Xu, Chang-Jiu Li, Hanlin Liao, Chritian Coddet, Khiam Aik Khor, Ti and Ti-6Al-4V coatings by cold spraying and microstructure modifications by heat treatment, Advance Engineering Materials, 2007, Vol.9 (5) (2007): 418-423

89.     Chao Zhang, Chang-Jiu Li,  Ga Zhang, Xian-Jin Ning, Cheng-Xin Li, Hanlin Liao, Christain Coddet, Ionic conductivity and its temperature dependence of atmospheric plasma sprayed yttria stabilized zirconia electrolyte, Materials Science and Engineering B, Vol.137 (1-3), 2007, pp.24-30

90.     Wen-Ya Li, Hanlin Liao, Chang-Jiu Li, Hee-Seon Bang, Christian Coddet, Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying, Applied Surface Science, Vol.253 (11) (2007): 5084-5091

91.     Wen-Ya Li, Chang-Jiu Li, Hanlin Liao, Christian Coddet, Effect of heat treatment on the microstructure and microhardness of cold-sprayed tin bronze coating, Applied Surface Science, Vol.253 (14) (2007): 5967-5971

92.     Guan-Jun Yang, Chang-Jiu Li, Yu-Yue Wang, Cheng-Xin Li, Dominant microstructural feature over photocatalytic activity of high velocity oxy-fuel sprayed TiO2 coating, Surface & Coatings Technology, Vol.202, (2007) 63-68

93.     Sheng-Qiang Fan, Chang-Jiu Li, Guan-Jun Yang, Ling-Zi Zhang, Jin-Cheng Gao, and Ying-Xin Xi, Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature, Journal of Thermal Spray Technology, Vol.16, No.5-6, 2007, 893-897

94.     Guan-Jun Yang, Chang-Jiu Li, Sheng-Qiang Fan, Yu-Yue Wang, Cheng-Xin Li,  Influence of Annealing on Photocatalytic Performance and Adhesion of Vacuum Cold-Sprayed Nanostructured TiO₂ Coating, Journal of Thermal Spray Technology, Vol.16, No.5-6, 2007, 873-880

95.     Chao Zhang, Wen-Ya Li, Hanlin Liao, Chang-Jiu Li, Cheng-Xin Li, Christian Coddet, Microstructure and Electrical Conductivity of Atmospheric Plasma-Sprayed LSM/YSZ Composite Cathode Materials, Journal of Thermal Spray Technology, Vol.16 (5-6) (2007), p.1005-1010

96.     Guan-Jun Yang, Chang-Jiu Li, Xin-Chun Huang, Cheng-Xin Li, Yu-Yue Wang,  Influence of Silver Doping on Photocatalytic Activity of Liquid-Flame- Sprayed- Nanostructured TiO2 Coating, Journal of Thermal Spray Technology, Vol.16, No.5-6, 2007, 881-885.

97.     Chang-Jiu Li, Guan-Jun Yang, Pei-Hu Gao, Jian Ma, Yu-Yue Wang, Cheng-Xin Li, Characterization of Nanostructured WC-Co Deposited by Cold Spraying, Journal of Thermal Spray Technology, Vol.16, No.5-6, 2007, 1011-1020

98.     Gang-Chang Ji, Chang-Jiu Li, Yu-Yue Wang, Wen-Ya Li, Erosion Performance of HVOF-Sprayed Cr₃C₂-NiCr Coatings, Journal of Thermal Spray Technology, Vol.16, No.4, 2007，557-565

99.     Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Qiang Zhang, Wen-Ya Li, Microstructural Characterization of Cold-Sprayed Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled Feedstock Powders, Journal of Thermal Spray Technology, Vol.16, No.5-6, 2007, pp.669-676

100.  F.-X. Ye, A. Ohmori, T. Tsumura, K. Nakata, and C.-J. Li, Microstructural Analysis and Photocatalytic Activity of Plasma-Sprayed Titania-Hydroxyapatite Coatings, Journal of Thermal Spray Technology, Vol.16, No.5-6, 2007, 776-782

101.  Wen-Ya, Li, Chao Zhang, Xueping Guo, Chang-Jiu Li, Hanlin Liao, C. Coddet, Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying, APPLIED SURFACE SCIENCE 254 (2): 517-526 SEP 15 2007

2008

102.  W.-Y. Li, C. Zhang, X.P. Guo, G. Zhang, H.L. Liao, C.-J. Li, C. Coddet, Effect of standoff distance on coating deposition characteristics in cold spraying”, Materials & Design, 29(2008)297-304

103.  Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xing Li, Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating, Vacuum, Volume: 83, Issue: 1, 2008, P.146-152

104.  Cheng-Xin Li, Ying-Xin Xie, Chang-Jiu Li, Guan-Jun Yang, Characterization of atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte, Journal of Power Sources, Vol.184, Issue: 2, 2008, P.370-374

105.  Ya-Zhe Xing, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria Stabilized Zirconia as an Electrolyte in Solid Oxide Fuel Cells, J. Power Sources, 2008, Vol.176, 2008, pp.31-38.

106.  Ya-Zhe Xing, Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ying-Xin Xie, Microstructure Development of Plasma Sprayed Yttria-Stabilized Zirconia and its Effect on Electrical Conductivity, Solid State Ionics, Solid State Ionics, Volume: 179, Issue: 27-32, 2008, P.1483-1485

107.  Chang-Jiu Li, Cheng-Xin Li, Hui-Guo Long, Ya-Zhe Xing, Guan-Jun Yang, Performance of tubular solid oxide fuel cell assembled with plasma-sprayed Sc2O3-ZrO2 electrolyte, Solid State Ionics, Volume: 179, Issue: 27-32, 2008, P.1575-1578

108.  Chao Zhang, Ga Zhang, Susanne Leparoux, Hanlin Liao, Cheng-Xin Li, Chang-Jiu Li, Christian Codde, Microwave sintering of plasma-sprayed yttria stabilized zirconia electrolyte coating, Journal of the European Ceramic Society, Volume: 28, Issue: 13, 2008, P.2529-2538

109.  Chao Zhang, Wen-Ya Li, Marie-Pierre Planche, Cheng-Xin Li, Hanlin Liao, Chang-Jiu Li, Christian Coddet, Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating, Surface & Coatings Technology, Volume: 202, Issue: 20, 2008, P.5055-5061

110.  Q. Zhang, C.-J Li, C.-X. Li, G.-J. Yang, H.-T. Wang, S.-C. Lui, Study of oxidation behavior of cold-sprayed nanostructured NiCrAlY bond coatings, Surface & Coatings Technology, Volume: 202, Issue: 14, 2008, P.3378-3384. (IDS Number: 286TA)

111.  Chao Zhang, Chang-Jiu Li, Hanlin Liao, Marie-Pierre Planche, Cheng-Xin Li, Christain Coddet, Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ electrolyte coating for solid oxide fuel cells, Surface & Coatings Technology, Volume: 202, Issue: 12, 2008, P.2654-2660

112.  Xian-Jin Ning, Jae-Hoon Jang, Hyung-Jun Kim, Chang-Jiu Li, Changhee Lee, Cold spraying of Al-Snbinary alloy: Coating characteristics and particle bonding features, Surface & Coatings Technology, Volume: 202, Issue: 9, 2008, P.1681-1687

113.  Ya-Zhe Xing, Yong Li, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Influence of substrate temperature on microcracks formation in plasma-sprayed yttria-stabilized zirconia splats, Key Engineering Materials, Volume: 373-374, 2008, P.69-72

114.  Yang, Guan-Jun, Li, Chang-Jiu, Han, Feng, Li, Wen-Ya, Ohmori, Akira, Low temperature deposition and characterization of TiO2 photocatalytic film through cold spray, Applied Surface Science, Vol.54(13), 2008, P.3979-3982.

115.  Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xing Li, Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure, Applied Surface Science, Vol.255(5), 2008, P.2538-2544

116.  W.-Y. Li , C. Zhang, X.P. Guo, G. Zhang, H.L. Liao, C.-J. Li, C. Coddet, Effect of standoff distance on coating deposition characteristics in cold spraying, Materials & Design, Vol.29(2), 2008, P.297-304

117.  Y.Z. Xing, C.J. Li, Q. Zhang, C.X. Li, G.J. Yang, Influence of Microstructure on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits, Journal of the American Ceramic Society, Vol.91 (12), 2008, 3931-3936

118.   Fukumoto M, Hwang S.Y., Li C.J., Khor M.A., The current status of thermal spraying in Asia, Journal of Thermal Spray Technology, Vol17(1), 2008, P.5-13

119.  G.J. Yang, C.J. Li, S.J. Zhang, C.X. Li, High-Temperature Erosion of HVOF Sprayed Cr3C2-NiCr Coating and Mild Steel for Boiler Tubes, Journal of Thermal Spray Technology, Vol.17(5-6), 2008, P.782-787

120.  P.-H. Gao, Y.-G. Li, C.-J. Li, G.-J. Yang, C.-X. Li, Influence of Powder Porous Structure on the Deposition Behavior of Cold-Sprayed WC-12Co Coatings, Journal of Thermal Spray Technology, Vol.17(5-6), 2008, P.742-749

121.  Q. Zhang, C.J. Li, X.R. Wang, Z.L. Ren, C.X. Li, G.J. Yang, Formation of NiAl Intermetallic Compound by Cold Spraying of Ball-Milled Ni/Al Alloy Powder Through Postannealing Treatment, Journal of Thermal Spray Technology, Vol.17(5-6), 2008, P.715-720

122.  Q. Zhang, CJ Li, Y Li, SL Zhang, XR Wang, GJ Yang, CX Li, Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat, Journal of Thermal Spray Technology, Vol.17(5-6), 2008, P.838-845

123.  Gao PH, Li CJ, Yang GJ, Li YG, Li CX, Influence of substrate hardness on deposition behavior of single porous WC-12Co particle in cold spraying, Surface & Coatings Technology, 203(3-4), 2008: 384-390

124.  G.-J. Yang, C.-J. Li, Y.-Y. Wang, C.-X. Li, Origin of preferential orientation of rutile phase in thermally sprayed TiO2 coatings, Materials Letters, 62(10-11)(2008) 1670-1672

125.  Hong-Tao Wang, Guan-Jun Yang, Chang-Jiu Li*, Cheng-Xing Li, Effect of annealing treatment on the structure and microhardness of cold-sprayed nanostructured FeAl/WC composite coating, Key Engineering Materials, Volume: 373-374, 2008, P.73-76

126.  A.F. Zhang, Y.Y.Wang, C.-J.Li, Effects of erosion rate on the erosion-corrosion synergism of high velocity oxy-fuel sprayed Ni-based coatings, Key Engineering Materials, Volume: 373-374, 2008, P.585-588

127.  Min Gao, Cheng-Xin Li, Ming-De Wang, Hua-Lei Wang, Chang-Jiu Li, Influence of the surface roughness of plasma-sprayed YSZ on LSM cathode polarization in solid oxide fuel cells, Key Engineering Materials, Volume: 373-374, 2008, P.641-644

128.  Sheng-Qiang Fan, Chang-Jiu Li, Guan-Jun Yang, Jin-Cheng Gao, Ling-Zi Zhang, Cheng-Xin Li, Yu-Yue Wang, Room-temperature deposition of nano-TiO2 coating by Vacuum cold spraying using TiCl4-agglomerated nano-TiO2 powder for flexible dye-sensitized solar cell, Key Engineering Materials, Volume: 373-374, 2008, P.742-745

2009

129.  Min Gao, LI Chang-Jiu, Li Cheng-Xin, Yang Guan-Jun, Fan, Sheng-Qiang, Microstructure, oxygen stoichiometry and electrical conductivity of flame-sprayed Sm_0.7Sr_0.3CoO_3-delta, J. Power Sources, 2009, 191 (2): 275-279

130.  Li Cheng-Xin, LI Chang-Jiu, Yang Guan-Jun, Development of a Ni/Al2O3 Cermet-Supported Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by Atmospheric Plasma-Spraying, J. Thermal Spray Techn., 2009, 18 (1), 83-89

131.  Chao Zhang, Abdoul-Fatah Kanta, Cheng-Xin Li, Chang-Jiu Li, Marie-Pierre Planche, Hanlin Liao, Christain Coddet, Effect of in-flight particle characteristics on the coating properties of atmospheric plasma-sprayed 8 mol% Y2O3-ZrO2 electrolyte coating studying by artificial neural networks, Surface & Coatings Techn, 2009, 204, 463–469, doi:10.1016/j.surfcoat.2009.08.009

132.  Wen-Ya Li, Chao Zhang, Chang-Jiu Li, Hanlin Liao, Modeling aspects of high velocity impact of particles in cold spraying by explicit finite element analysis, J. Thermal Spray Techn., 18(5-6), 921-933, doi: 10.1007/s11666-009-9325-2

2010

133.   Cheng-Xin Li, Chang-Jiu Li, Lie-Jin Guo, Effect of composition of NiO/YSZ anode on the polarization characteristics of SOFC fabricated by atmospheric plasma spraying, International Journal of Hydrogen Energy, V.35, 2010, pp.2964-2969 (doi:10.1016/j.ijhydene.2009.05.041).

134.   Xiao-Ming Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited by suspension plasma spraying, International Journal of Hydrogen Energy, V.35, 2010, pp.3152-3158, ( doi:10.1016/j.ijhydene.2009.11.023)

135.  Cheng-Xin Li, Chang-Jiu Li, Lie-Jin Guo, Performance of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell operating with biomass-based syngas through supercritical water, International Journal of Hydrogen Energy, 35(2010)2904-2908( doi:10.1016/j.ijhydene.2009.05.033)

136.   Yong Zhou, Chang-Jiu Li, Guan-Jun Yang, Hong-Duo Wang, Geng Li, Effect of self-propagating high temperature combustion synthesis on the deposition of NiTi coating by cold spraying using mechanical alloying Ni/Ti powder, Intermetallics, V.18, 2010, pp.2154-2158.

137.   Yong Li, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Relation between microstructure and thermal conductivity of plasma-sprayed 8YSZ coating, International Journal of Modern Physics B, V.24(15-16), 2010, pp.3017-3022.

138.   Qiang Zhang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Effect of powder structure on microstructure of the oxide scales formed on cold-sprayed NiCrAlY coatings, International Journal of Modern Physics B, V.24(15-16), 2010, pp.3041-3046.

139.   Chang-Jiu Li, Xin-Kun Suo, Guan-Jun Yang, Cheng-Xin Li, Influence of annealing on the microstructure and wear performance of diamond/NiCrAl composite coating deposited through cold spraying, Materials Science Forum,  Vols. 638-642, 2010, pp.894-899, doi:10.4028/www.scientific.net /MSF.638-642.894

140.   Wen-Ya Li, Chang-Jiu Li, Characterization of cold-sprayed nanostructured Fe-based alloy, Applied Surface Science, V.256, 2010, pp.2193-2198, doi:10.1016/j.apsusc.2009.09.072

141.   Pei-Hu Gao, Chang-Jiu Li, Guan-Jun Yang, Yi-Gong Li, Cheng-Xin Li, Influence of substrate hardness transition on built-up of nanostructured WC-12Co by cold spraying, Applied Surface Science, V.256, 2010, pp.2163-2168, doi: 10.1016/j.apsusc.2009.10.050

142.   X.-M. Wang, C.-J. Li, C.-X. Li, G.-J. Yang, Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application, Journal of Thermal Spray Technology, Vol.19(1-2), 2010, p.311-316, doi:10.1007/s11666-009-9373-7

143.   Y. Li, C.-J. Li, Q. Zhang, G.-J. Yang, C.-X. Li, Influence of TGO Composition on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-sprayed MCrAlY Bond Coat, Journal of Thermal Spray Technology, Vol.19(1-2), 2010, p.168-177, doi:10.1007/s11666-009-9372-8.

144.   C.-J. Li, H.-T. Wang, Q. Zhang, G.-J. Yang, W.-Y. Li, and H.L. Liao, Influence of Spray Materials and Their Surface Oxidation on the Critical Velocity in Cold Spraying, Journal of Thermal Spray Technology, Vol.19(1-2), 2010, p.95-101, doi:10.1007/s11666-009-9427-x

145.  P.F. Zhao, C.A. Sun, X.Y. Zhu, F.L. Shang, C.J. Li, Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending method, Surface & Coatings Technology, 204 (2010), 4066–4074

146.  Wen-Ya Li, Chang-Jiu Li, Guan-Jun Yang, Effect of impact-induced melting on interface microstructure and bonding of cold-sprayed zinc coating, Applied Surface Science, V.257(5), 2010, pp.1516-1523.

147.  Yong Li, Chang-Jiu Li, Guan-Jun Yang, Lu-Kuo Xing, Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying, Surface & Coatings Technology, 205 (2010) 2225–2233

2011

148.   C.-J. Li, H.-T. Wang, G.-J. Yang, C.-G. Bao, Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating, Journal of Thermal Spray Technology, Vol.20, 2011, pp.227-231

149.   S. Hao, C.-J. Li, G.-J. Yang, Influence of Deposition Temperature on the Microstructures and Properties of Plasma-sprayed Al₂O₃ Coatings, J. Thermal Spray Tech., Vol.20, 2011, pp.160-169

150.   Y. Li, C.-J. Li, Q. Zhang, L.-K. Xing, G.-J. Yang, Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on its Isothermal Oxidation Behavior, J. Thermal Spray Tech., Vol.20, 2011, pp.121-131.

151.   Y.-Y. Wang, Y. Liu, C.-J. Li, G.-J. Yang, J.-J. Feng, and K. Kusumoto, Investigation on the Electrical Properties of Vacuum Cold Sprayed SiC-MoSi₂ Coatings at Elevated Temperatures, Journal of Thermal Spray Technology, Volume 20(4) , 2011, 892-897

152.  Guan-Jun Yang, Chang-Jiu Li, Sheng-Qiang Fan, Jin-Cheng Gao, Influence of pore structure on ion diffusion property in porous TiO₂ coating and photovoltaic performance of dye-sensitized solar cells, Surface and Coatings Technology, 2011, Vol.205(10), pp.3205-3210. DOI: 10.1016/j.surfcoat.2010.11.042   

153.   Guan-Jun Yang, Chang-Jiu Li, Kai-Xing Liao, Xue-Long He, Shan Li, Sheng-Qiang Fan, Influence of gas flow during Vacuum cold spraying of nano-porous TiO₂ film by using strengthened nanostructured powder on performance of dye-sensitized solar cell, Thin Solid Films, 2011, Vol.519, 4709-4713, (http://dx.doi.org/10.1016/j.tsf.2011.01.021)

154.   Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Multiple strengthening mechanisms of cold-sprayed cBNp/NiCrAl composite coating, Surface and Coatings Technology, V.205, 2011, P.4808-4813, doi:10.1016/j.surfcoat.2011.04.065

155.   Sheng-Qiang Fan, Chuleoo Kim, Baizeng Fang, Kai-Xing Liao, Guan-Jun Yang, Chang-Jiu Li, Jeum-Jong Kim, Jaejung Ko, Improved efficiency of over 10% in dye-sensitized solar cells with a Ruthenium complex and an organic dye heterogeneously positioning on a single TiO₂ electrode, Journal of Physical Chemistry C, Vol.115(15), 2011, pp. 7747-7754.   DOI: 10.1021/jp200700e  

156.  Guan-Jun Yang, Hong-Tao Wang, Chang-Jiu Li, Cheng-Xin Li, Effect of annealing on the microstructure and erosion performance of cold-sprayed FeAl intermetallic coatings, Surface and Coatings Technology, 205 (2011) 5502-5509.

157.  Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Katsuyoshi Kondoh, High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact, Scripta Materialia, 65 (2011), 581-584.

158.  P.F. Zhao, X.D. L, F.L. Shang, C.J. Li, Interlamellar cracking of thermal barrier coatings with TGOs by non-standard four-point bending tests, Materials Science and Engineering A, A528 (2011), 7641-7647

159.   Changjiu Li, Yong Li, Lukuo Xing, Guanjun Yang, Chengxin Li, Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior, Materials Science Forum, Vol.686, 2011, p.595-602. DOI: 10.4028/www.scientific.net/MSF.686.595

160.  Xue-Long He, Mei Liu, Guan-Jun Yang, Sheng-Qiang Fan, Chang-Jiu Li, Correlation between microstructure and electrocatalytic property of electroless deposited Pt counter electrodes on plastic substrate and photovoltaic performance of dye-sensitized solar cells, Applied Surface Science, 258 (2011) 1377-1384, 2011,  doi:10.1016/j.apsusc.2011.09.070

161.  Guan-Jun Yang, Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Layer-by-layer fabrication of multiple-dye-sensitized TiO₂ films for dye-sensitized solar cells by Vacuum cold spray, Nanoscience and Nanotechnology Letters (NNL), Vol.3(No.4), 2011, 483-486

162.  Xiao-Ming Wang, Chang-Jiu Li, Cheng-Xin, Li-Hui Tian, Guan-Jun Yang, Microstructure and electrochemical behavior of La_0.8Sr_0.2MnO₃ deposited by solution precursor plasma spraying, Rare Metal Materials and Engineering,  Vol.40(11), 2011, pp.1881-1886

2012

163.  Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Preparation of cBNp/NiCrAl Nanostructured Composite Powders by a Step-Fashion Mechanical Alloying Process, Powder Technology, 217 (2012) 591-598

164.  Xiao-Tao Luo and Chang-Jiu Li, Thermal Stability of Microstructure and Hardness of Cold-Sprayed cBN/NiCrAl Nanocomposite Coating, Journal of Thermal Spray Technology, 2012, Vol.21, 578-585 DOI: 10.1007/s11666-011-9719-9

165.  Guan-Jun Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Simultaneous strengthening and toughening effects in WC-(nanoWC-Co), Scripta Materialia, 2012, Vol.66, 777-780.

166.  Guan-Jun Yang, Kai-Xing Liao, Chang-Jiu Li, Sheng-Qiang Fan, Cheng-Xin Li, Shan Li, Formation of pore structure and its influence on the mass transport property of Vacuum cold sprayed TiO₂ coatings using strengthened nanostructured powder, Journal of Thermal Spray Technology, 2012, Vol.21, 505-513

167.  Guan-Jun Yang, Xu-Dong Xiang, Lu-Kuo Xing, Ding-Jun Li, Chang-Jiu Li, Cheng-Xin Li, Isothermal oxidation behavior of NiCoCrAlTaY coating deposited by high velocity air-fuel spraying, Journal of Thermal Spray Technology, 2012, Vol.21, 391-399

168.  Chang-Jiu Li, Yong Li, Guan-Jun Yang, Cheng-Xin Li, A novel plasma-sprayed durable thermal barrier coating with the well-bonded YSZ interlayer between porous YSZ and bond coat, Journal of Thermal Spray Technology, 2012, Vol.21, 383-390

169.  Hong-Tao Wang, Chang-Jiu Li, Gang-Chang Ji, and Guan-Jun Yang, Annealing Effect on the Intermetallic Compound Formation of Cold Sprayed Fe/Al Composite Coating, Journal of Thermal Spray Technology, 2012, Vol.21, 571-577.

170.  L.-H. Tian, C.-X. Li, C.-J. Li, G.-J. Yang, Effect of dispersed TiC content on the microstructure and thermal expansion behavior of shrouded-plasma-sprayed FeAl/TiC composite coatings, J. Thermal Spray Technol., 21(2012)689-694

171.  ChengXin Li, GuanJun Yang, Changjiu Li, Influence of atmospheric plasma-sprayed composite cathode on the performance of solid fuel cells, Rare Metals Materials and Engineering, 2012, 41(S1), 448-452.

172.  Xue-Long He, Mei Liu, Guan-JunYang, Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Preparation of flexible Pt counter elctrode on indium-doped tin oxide coated polyethylene naphthalate for dye-sensitized solar cells, 2011, Rare Metals Materials and Engineering, 2012, 41(S1), 464-466

173.  Guan-Jun Yang, Xiao-Hu Kang, Cheng-Xin Li, Chang-Jiu Li, Influence of deposition temperature on the splat bonding and mechanical properties of plasma-sprayed tungsten coatings, Rare Metals Materials and Engineering, 2012, 41(S1), 394-398

174.  Xue-Long He, Guan-Jun Yang, Hai-Long Yao, Chang-Jiu Li, Shan Li, Mei Liu, Sheng-Qiang Fan, Strategy to Improve the Performance of Dye-sensitized Solar Cells Based on TiO₂ Films Prepared by Room Temperature Cold Spray, Rare Metals Materials and Engineering, 2012, 41(S1), 191-194

175.   Li-Hui Tian, Cheng-Xin Li, Guan-Jun Yang, Chang-Jiu Li, Formation of Iron-aluminide Coating through Annealing of Shrouded Plasma-sprayed Iron/aluminum Composite, Rare Metals Materials and Engineering, 2012, 41(S1), 367-471

176.  Xiao-Tao Luo, Chang-Jiu Li, Dual-scale oxide dispersoids reinforcement of Fe40at.%Al intermetallic coating for both high hardness and high fracture toughness, Materials Science and Engineering A, A 555 (2012) 85-92

177.  Cheng-Xin Li, Liang-Liang Yun, Yang Zhang, Chang-Jiu Li, Lie-Jin Guo, Microstructure, Performance and Stability of Ni/Al₂O₃ cermet-supported SOFC operating with coal-based syngas produced using supercritical water, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13001-13006

178.  Cheng-Xin Li, Shuai Liu, Yang Zhang, Chang-Jiu Li, Characterization of the Microstructure and Electrochemical Behavior of Sm_0.7Sr_0.3Co_3-δ Cathode Deposited by Solution Precursor Plasma Spraying, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13097-13102

179.  Xiao-Ming Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Microstructure and polarization of La_0.8Sr_0.2MnO₃ cathode deposited by alcohol solution precursor plasma spraying, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13879-12885

180.  Biao Chen, Chang-Jiu Li, Guan-Jun Yang, Jian-Tao Yao, Hui-Bin Huo, Cheng-Xin Li, Fabrication of Porous Molybdenum by Controlling Spray Particle State, Journal of Thermal Spray Technology, 2012, Vol.21, pp 1032-1045

2013

181.  Chang-Jiu Li, Guan-Jun Yang, Relationships between feedstock structure, particle parameter, coating deposition, microstructure and properties for thermally sprayed conventional and nanostructured WC-Co, Int. Journal of Refractory Metals and Hard Materials, 2013, Vo.39, pp.2-17 http://dx.doi.org/10.1016/j.ijrmhm.2012.03.014

182.  Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Minimization of iron contamination during mechanical alloying preparation of cubic BN particle reinforced NiCrAl matrix composite powder, Journal of Alloy and compound, 2013, 548, pp.180-187

183.  Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Development of the Particle Interface Bonding in Thermal Spray Coatings: A Review, Journal of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 192-206, DOI: 10.1007/s11666-012-9864-9

184.  Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, A. Ohmori, K. Kondoh, Improvement of Adhesion and Cohesion in Plasma sprayed Ceramic Coatings by Heterogeneous Modification of Nonbonded Interface through High Strength Adhesive Infiltration, Volume 22, Issue 2 (2013), Page 36-47

185.  Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Characterization of Nonmelted Particles in Plasma-Sprayed Al2O3 Coatings by Scanning Electron Microscopy, Raman Analysis and X-Ray Diffraction Analysis, Journal of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 131-137

186.  E.-J. Yang, G.-J. Yang, X.-T. Luo, C.-J. Li, M. Takahashi, Epitaxial Grain Growth during Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying, Journal of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 152-157, DOI: 10.1007/s11666-012-9862-y

187.   Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Microstructure and Properties of Porous Ni50Cr50-Al₂O₃ Cermet Support for Solid Oxide Fuel Cells, Journal of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 158-165

188.  Guan-Jun Yang, Su-Ning Zhao, Cheng-Xin Li, Chang-Jiu Li, Effect of Phase Transformation Mechanism on the Microstructure of Cold-sprayed Ni/Al-Al₂O₃ Composite Coatings during Post-spray Annealing Treatment, Journal of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 398-405

189.  Hai-Long Yao, Guan-Jun Yang, Shan Li, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Synergistic effects of high temperature and impact compaction on the nano-TiO₂ film for the significant improvement of photovoltaic performance of flexible dye-sensitized solar cells, Electrochimica Acta, 2013, Vol.87, pp.940-947

190.  Xue-Long He, Mei Liu, Guan-Jun Yang, Hai-Long Yao, Sheng-Qiang Fan, Chang-Jiu Li, Photovoltaic performance degradation and recovery of the flexible dye-sensitized solar cells by bending and relaxing, Journal of Power Sources, 2013, V.226, p.173-178

191.  Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li , Guan-Jun Yang, Zhi-Hai Han, Scandia Stabilized Zirconia Electrolyte with Improved Inter-Lamellar Bonding by High Velocity Plasma Spraying for High Performance Solid Oxide Fuel Cells, Journal of Power Sources, 2013, V.232, p.123-131

192.  Li-Hui Tian, ChengXin Li, Guan-Jun Yang, Chang-Jiu Li, Effect of TiC addition and high-temperature annealing on the microstructure and electrical conductivity of shrouded-plasma-sprayed FeAl/TiC coatings, Journal of Power Sources, 2013, V.233, p.394-400

193.  Guan-Jun Yang, Zheng-Long Chen, Cheng-Xin Li, Chang-Jiu Li, Microstructure and mechanical property evolution of plasma-sprayed YSZ coating during high temperature exposure: comparison study between 8YSZ and 20YSZ, Journal of Thermal Spray Technology, Volume 22, Issue 6 (2013), p.1294-1302

194.  Hua Xie, Ying-Chun Xie, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Modeling thermal conductivity of thermally sprayed coatings with intra-splat cracks, Journal of Thermal Spray Technology, Volume 22, Issue 6 (2013), pp.1328-1336

195.  Chang-Jiu Li, Yong Li, Guan-Jun Yang, Cheng-Xin Li, Evolution of Lamellar Interface Cracks during Isothermal Cyclic Test of Plasma-Sprayed 8YSZ coating with a columnar structured YSZ interlayer, Journal of Thermal Spray Technology, Volume 22, Issue 6 (2013), pp.1374-1382

196.  Guan-Jun Yang, Cheng-Xin Li, Shun Hao, Ya-Zhe Xing, Er-Juan Yang, Chang-Jiu Li, Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials, Surface & Coatings Technology, 2013, V.235, p.841-847

197.   R. Xie, D. Li, G. Yang, C. Li, The influence of zirconium carbide addition on oxidation behaviour of NiAl coatings prepared by cold spraying of ball-milled Ni-Al alloy powder, Materials Science and Technology, 2013, Vol.29(9), pp.1125-1129 DOI: 10.1179/1743284713Y.0000000289

2014

198.  Xue-Long He, Guan-Jun Yang Chang-Jiu Li, Cheng-Xing Li, Influence of accelerating gas flow rate on the particle cohesion in room temperature cold sprayed scattering layer for plastic-based dye-sensitized solar cell, Applied Surface Science, 2014, V. 288, pp.416-422  0169-4332  WOS:000327493400055

199.  Xue-Long He, Guan-Jun Yang, Hai-Long Yao, Sheng-Qiang Fan, Chang-Jiu Li, Room temperature cold sprayed TiO2 scattering layer for high performance and bending resistant plastic dye-sensitized solar cells, Journal of Power Sources, 2014, V.251, pp.122-129  WOS:000330256400014   ISSN: 0378-7753

200.  Hui Dong, Guan-Jun Yang, Cheng-Xin Li, Xiao-Tao Luo, Chang-Jiu Li, Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma-Sprayed TBCs, Journal of American Ceramic Society, 97 [4] 1226-1232 (2014), DOI: 10.1111/jace.12868    WOS:000333550500035  ISSN: 0002-7820

201.  Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li,  Chemical compatibility and properties of suspension plasma sprayed SrTiO3-based anodes for intermediate-temperature solid oxide fuel cells, Journal of Power Sources, 264(2014), pp.195-205  WOS:000337861800025

202.  Shan-lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Plasma-Sprayed Y2O3-Stabilized ZrO2 Electrolyte With Improved Interlamellar Bonding for Direct Application to Solid Oxide Fuel Cells, Journal of Fuel Cell Science and Technology, Transactions of the ASME, JUNE 2014, Vol. 11(3), 031005, Paper No: FC-12-1063; DOI: 10.1115/1.4026143   WOS:000335950300005  ISSN: 1550-624X

203.  Hai-Long Yao, Jun-Hua Ma, Guan-Jun Yang, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Nano-porous TiO2 layer using ultrafine nano-particles for the blocking layer in dye-sensitized solar cells, Journal of Nanoscience and Nanotechnology Letters, 2014, 14(4):2829-2835   WOS:000332226600018   

204.  Tao Liu, Er-Juan Yang, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, The interface bonding formation during plasma spraying of La2Zr2O7 coating, Materials Research Innovations, 2014, 2014, Vol.18[S4], pp. S973-S978

205.  Xiao-Tao Luo, Guan-Jun Yang, Chen-Xin Li, Chang-Jiu Li, Microstructure, mechanical properties and two body abrasive wear behavior of cold-sprayed 20vol.% cubic BN-NiCrAl nanocomposite coating, Journal of Thermal Spray Technology, 2014, 23, 1181-1190  ISSN:1059-9630  INSPEC:14994280

206.  Jian-Tao Yao, Jun-Qiang Ren, Hui-Bin Huo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Deposition Behavior of Semi-Molten Spray Particles During Flame Spraying of Porous Metal Alloy, Journal of Thermal Spray Technology, 2014, 23, 991-999 INSPEC:14965566   ISSN:1059-9630

207.  X.-T. Luo, C.X. Li, F.L. Shang, G.J. Yang, Y.Y.Wang, C.-J. Li, High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review Surf. Coat. Technol. (2014), 254:11-20.   INSPEC:14966197   ISSN:0257-8972  http://dx.doi.org/10.1016/j.surfcoat.2014.06.006

208.  X.M. Wang, C.X. Li, J.Y. Huang, G.J.Yang, C.-J .Li, Deposition mechanism of convex YSZ particles and effect of electrolyte/cathode interface structure on cathode performance of solid oxide fuel cell, International Journal of Hydrogen Energy, 2014,39(25):13650-13657  INSPEC:14994013  ISSN:0360-3199

209.   Y.Z.Hu, C.X. Li, G.J. Yang, C.J. Li, Evolution of microstructure during annealing of Mn1.5Co1.5O4 spinel coatings deposited by atmospheric plasma spray, International Journal of Hydrogen Energy, 2014,39(25):13844-13851 WOS:000341343200102  ISSN: 0360-3199

210.  Jian-Tao Yao, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Fabrication of Porous Stainless Steel by Flame Spraying of Semimolten Particles, Materials Manufacturing Processes, 2014, 29(10):1253-1259  WOS:000342065100017  ISSN: 1042-6914

211.  Er-Juan Yang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Makoto Takahashi, Effect of intersplat interface bonding on the microstructure of plasma-sprayed Al2O3 coating, IOP Conf. Series: Materials Science and Engineering, 61 (2014) 012022 doi:10.1088/1757-899X/61/1/012022   WOS:000346794000022  ISSN: 1757-8981

2015

212.  X.T. Luo, C.X. Li, C-J Li. WC-Co composite coating deposited by cold spraying of a core-shell structured WC-Co powder, Journal of Thermal Spray Technology, 2015, Vol.24, pp.100-107 WOS:000347416800013  ISSN: 1059-9630; DOI: 10.1007/s11666-014-0133-y

213.  Shan-Lin Zhang, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Meilin Liu, Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells, Journal of Materials Chemistry A, 2015, 3, p.7535-7553  ISSN: 2050-7488; WOS:000351845400043; DOI: 10.1039/c5ta01203a

214.  Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, M. Takahashi, Epitaxial Grain Growth during 8YSZ Splat Formation on Polycrystalline YSZ Substrates by Plasma Spraying, Surface & Coatings Technology, 2015, 274, 37-43  WOS:000356115700005   ISSN: 0257-8972; DOI: 10.1016/j.surfcoat.2015.04.031

215.  Xiao-Tao Luo, Cheng-Xin Li, Guan-Jun Yang, Chang-Jiu Li, Lager sized cBN reinforced nanocomposite matrix cubic BN-NiCrAl composite coating with improved abrasive wear resistance deposited by cold spray, Materials & Design, 2015, pp.249-256; WOS:000359329000030; ISSN: 0261-3069; DOI: 10.1016/j.matdes.2015.06.009; 

216.  Jian-Tao Yao, Chang-Jiu Li, Yi Li, Biao Chen, Hui-Bin Huo, Relationships between the properties and microstructure of Mo-Cu composites prepared by infiltrating copper into flame-sprayed porous Mo skeleton, Materials and Design, 88 (2015) 774-780  WOS:000364257300091  ISSN: 0261-3069; DOI: 10.1016/j.matdes.2015.09.062

217.  Hui Dong, Guan-Jun Yang, Hong-Neng Cai, Cheng-Xin Li, Chang-Jiu Li, Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient thermal cycling, Ceramics International, 41(3)(2015) 3481-3489; ISSN: 0272-8842  WOS:000350188900018; DOI: 10.1016/j.ceramint.2014.10.174

218.  Guan-Jun Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Mechanical property and wear performance dependence on processing condition for cold-sprayed WC-(nanoWC-Co), Applied Surface Science, 2015, 332, pp. 80-88;  ISSN:0169-4332; INSPEC:14969621; WOS:000350373300011; DOI: 10.1016/j.apsusc.2015.01.138

219.  Hai-Long Yao, Guan-Jun Yang, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Ceramic nano-particle/substrate interface bonding formation derived from dynamic mechanical force at room temperature: HRTEM examination, Journal of Thermal Spray Technology, 24(4) (2015) 720-728;  ISSN: 1059-9630;  WOS:000351587600014; DOI: 10.1007/s11666-015-0226-2

220.  Hui Dong, Guan-Jun Yang, Hong-Neng Cai, Hang Ding, Cheng-Xin Li, Chang-Jiu Li, The influence of temperature gradient across YSZ thickness on thermal cyclic lifetime of plasma-sprayed thermal barrier coatings, Ceramics International, 2015, 41, Issue 9, Part A, November 2015, Pages 11046-11056; WOS:000359165500088; ISSN: 0272-8842; DOI: 10.1016/j.ceramint.2015.05.049 

221.  Xiao-Tao Luo, Ying-Kang Wei, Yan Wang, Chang-Jiu Li, Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying, Materials & Design, Volume 85, 15 November 2015, Pages 527-533; ISSN: 0261-3069;  WOS:000364585000062; DOI: 10.1016/j.matdes.2015.07.015

222.  Tao Liu, Xiao-Tao Luo, Xu Chen, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu Li, Morphology and Size Evolution of the Inter-Lamellar Two-Dimensional Pores in Plasma Sprayed La2Zr2O7 Coatings during Thermal Exposure at 1300°C, Journal of Thermal Spray Technology, 24(2015)739-748; WOS:000364585000062; ISSN: 1059-9630; DOI: 10.1007/s11666-015-0236-0

223.  Xue-Long He; Mei Liu, Guan-Jun Yang; Baizeng Fang, Chang-Jiu Li; Unexpected efficiency enhancement of flexible dye-sensitized solar cells by repeated outward bending, RSC Adv. RSC Advances, 2015, 5, 85174–85178  ISSN: 2046-2069; WOS:000363179900002; DOI: 10.1039/c5ra19365f

224.  Bang-Yan Zhang, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Healing of the interface between splashed particles and underlying bulk coating and its influence on isothermal oxidation behavior of LPPS McrAlY bond coat, Journal of Thermal Spray Technology, 2015,Volume 24,Issue 4,pp 611-621; WOS:000351587600002; ISSN: 1059-9630; DOI: 10.1007/s11666-015-0218-2

225.  Qing-Yu Chen, Xiao-Zhuang Peng, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ Using a < 80 kw shrouded torch based on optical emission spectroscopy, Journal of Thermal Spray Technology, 2015,Volume 24,Issue 6, pp 1038-1045; WOS:000358965400015; ISSN: 1059-9630; DOI: 10.1007/s11666-015-0248-9

226.  E.-J. Yang, G.-J. Yang, C.-X. Li, C-J. Li, A TEM Study of the Bonded Splat Interface Microstructure of Plasma-Sprayed YSZ Coating, Journal of Thermal Spray Technology, 2015, August 2015,Volume 24,Issue6,pp 907-914; WOS:000358965400002; ISSN: 1059-9630; DOI: 10.1007/s11666-015-0260-0 

227.  Xue-Long He; Ruo-Xi Shen; Chang-Jiu Li; Sheng-Qiang Fan, Baizeng Fang, Guan-Jun Yang, Behavioral study of the flexible platinum counter electrodes under alternating bending, RSC Adv., 2015,5, 73155-73161; WOS:000360552000082; ISSN: 2046-2069; DOI: 10.1039/c5ra13256h

228.  Xue-Long He, Guan-Jun Yang, Chang-Jiu Li, Mei Liu, Sheng-Qiang Fan, Failure mechanism for flexible dye-sensitized solar cells under repeated outward bending: cracking and spalling off of nano-porous titanium dioxide film, Journal of Power Sources, 2015, 280, pp.182-189; WOS:000350941400025;  ISSN:0378-7753  INSPEC:14936124; DOI: 10.1016/j.jpowsour.2015.01.088

229.  Guang-Rong Li, Bo-Wen Lv, Guan-Jun Yang, Wei-Xu Zhang, Cheng-Xin Li, Chang-Jiu Li, Relationship between lamellar structure and elastic modulus of thermally sprayed thermal barrier coatings with intra-splat cracks, Journal of Thermal Spray Technology, 2015, 24, 1355-1364   WOS:000366369800006; ISSN:1059-9630DOI: 10.1007/s11666-015-0292-5

230.  Qing-Yu Chen, Cheng-Xin Li, Tao Wei, Haibin Sun, Shan-Lin Zhang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Meilin Liu, Controlling grain size in columnar YSZ coating formation by droplet filtering assisted PS-PVD processing, RSC Advances, RSC Adv. 102126. Volume: 5, Issue: 124. 2015  WOS:000366162300001 ISSN: 2046-2069; DOI: 10.1039/c5ra20799a

2016

231.  Tao Liu, Shu-Wei Yao, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Atmospheric Plasma Sprayed 8YSZ Layer of Enhanced Splat Bonding as Protective Layer for Thermal Barrier Coatings against CMAS Infiltration and Corrosion, Journal of Thermal Spray Technology, 2016, 25, pp.213-221;

232.  Tao Liu, Shan-lin Zhang, Xiao-tao Luo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, High Sintering-Resistant Plasma-sprayed Thermal Barrier Coatings Designed with Large Two-dimensional Inter-lamellar Voids, Journal of Thermal Spray Technology, 2016, 25, pp.222-230

233.  Chang-Jiu Li, Jiao Zou, Hui-Bin Huo, Jian-Tao Yao, Guan-Jun Yang, Microstructure and Properties of Porous Abradable Alumina Coatings Flame-Sprayed by Semi-Molten Particles, Journal of Thermal Spray Technology, 2016, 25, pp.222-230 (DOI: 10.1007/s11666-015-0287-2)

234.  Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Meilin Liu, Application of high velocity oxygen fuel spraying to the fabrication of La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte for intermediate-temperature solid oxide fuel cells, Journal of Power Sources, 2016, V.301, pp.62-71; WOS:000365060500009; ISSN: 0378-7753; DOI: 10.1016/j.jpowsour.2015.09.050

235.  Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, M. Takahashi, Impact of deposition temperature on crystalline structure of plasma-sprayed Al2O3 splats revealed by FIB-HRTEM technique, Ceramics International, Volume 42, Issue 1, Part A, January 2016, Pages 853–860  WOS:000365369500101  ISSN: 0272-8842; DOI: 10.1016/j.ceramint.2015.09.010

236.  Qing-Yu Chen, Cheng-Xin Li, Jian-Zhuang Zhao, Guan-Jun Yang, Chang-Jiu Li, Microstructure of YSZ coatings deposited by PS-PVD using 45kW shrouded plasma torch, Materials Manufacturing Processes, 2015, accepted, DOI: 10.1080/10426914.2015.1019100

237.  Yi Liu, Yuyue Wang, Xinkun Suo, Yongfeng Gong, Chang-Jiu Li, Hua Li, Impact-induced bonding and boundary amorphization of TiN ceramic particles during room temperature Vacuum cold spray deposition, Ceramics International, 2016, Vol.42(1), 1640–1647  WOS:000365367000080  ISSN: 0272-8842; DOI: 16/j.ceramint.2015.09.116

238.  X.T. Luo, Y.J. Li, C.-J. Li, A comparison of cold spray deposition behavior between gas atomized and dendritic porous electrolytic Ni powders under the same spray conditions; Materials Letters, 2016, Vol.163, pp.58-60; WOS:000366081400016; ISSN: 0167-577X; DOI: 10.1016/j.matlet.2015.10.048

He also filed 24 Chinese invention patents which were approved. Here, just give a brief explanation to three patents as follows. 

1)      C.-J. Li, G.-J. Yang, H.T. Wang, A preparation method of Intermetallics coating, patent No.: ZL 200710017976.X

Intermetallics such FeAl, NiAl exhibit excellent corrosion and high temperature oxidation resistance, high temperature mechnical behavior, by such as abnormal strengthening effect from temperature over about 400^oC. This invent discloses a method to produce Intermetallics coating by cold spraying since it is difficult even impossible to directly deposit Intermetallics due to their intrinsinc low temperature brittleness. The present method includes: produce a mechanical alloy powders by ball milling, cold spray such mechanical alloying coating, then low temperature annealing the coating to transform the alloy to Intermetallics.

2)      C.-J. Li, G.-J. Yang, Y. Li, A thermal barrier coating and its deposition method, Patent No.: ZL 200910218772.1.

This TBC includes two layers: conventional top porous layer, a lamellae well bonded interlayer between metallic bond coat and top porous layer, with a transient layer to increase adhesion between above mention two layer. The different layers are all deposited by APS by just changing powders and deposition temperature. The unique point of the present invent is that the introduction of well bonded interlayer by which the cracking path is moved away from near TGO to over interlayer. High thermal cycling lifetime of such TBC design has been proved by SUNY. It can be expected to extend the service lifetime of TBCs.

3)      C.-J. Li, G.-J. Yang, C..X. Li, Manufacturing method for porous materials; Patent No.: ZL201210038361.6

This invent discloses the method to manufacture porous materials by controlling particle melting state to a semi-molten state and forming a strong bonding upon impact through deposition temperature controlling. It has been demonstrated to be able to form a deposit with porosity from several persent up to 80%. The porous deposits can not only be used as porous materials, but also as porous coatings for different applications. One typical one is porous ceramic coating for high temperature abradable ceramic coating having a porosity over 50%, which can not be deposited the existing spray methods.