Prof. Upadrasta Ramamurty

Title: Strength, ductility, fracture toughness, and fatigue resistance of additively manufactured alloys

讲座题目： 增材制造合金的强度、延展性、断裂韧性与疲劳抗力

Biography: After obtaining a PhD degree from Brown University, USA and post-doctoral stints at UCSB and MIT, Ramamurty held faculty positions at the Nanyang Technological University, Singapore and the Indian Institute of Science, Bangalore, India, before returning to NTU in 2018 where he currently holds a President's Chair Professor position. His research interests include deformation and fracture behavior of amorphous as well as crystalline alloys, additive manufacturing, and the development and application of the nanoindentation technique. He is an editor of Acta Materialia and Scripta Materialia, and an Academician of both the National Academies of Engineering and Sciences of India, and TWAS-The World Academy of Sciences.

简介： Ramamurty 教授在美国布朗大学获得博士学位后，曾在加州大学圣塔芭芭拉分校（UCSB）和麻省理工学院（MIT）从事博士后研究工作。此后，他曾任职于新加坡南洋理工大学（NTU）和印度班加罗尔的印度科学研究院（IISc），并于 2018 年回到南洋理工大学，目前担任校长讲席教授。他的研究兴趣包括非晶合金和晶体合金的变形与断裂行为、增材制造技术，以及纳米压痕技术的开发与应用。他现任《Acta Materialia》和《Scripta Materialia》期刊的副主编，同时也是印度国家工程院和科学院院士，以及发展中国家科学院（TWAS）院士。

Prof. Lei Hu

Title: Thermal Expansion and Conduction in Inorganic Materials: An Introductory Perspective

讲座题目：无机材料中热膨胀和热传导简介

Biography: Hu Lei, who has studied at Northwestern University (USA), Nanyang Technological University (Singapore), and Tokyo Institute of Technology (Japan), and previously served as a JSPS Postdoctoral Fellow in Japan, is currently affiliated with XJTU. His research focuses on addressing thermal expansion and thermal conduction challenges in the semiconductor and integrated circuit fields. He develops novel electronic packaging materials based on high-thermal-conductivity and negative-thermal-expansion materials. His primary research areas include electronic packaging materials and synchrotron radiation X-ray structural analysis.

简介：胡磊，曾在美国西北大学、新加坡南洋理工和日本东京工业大学留学，曾任日本JSPS博士后，目前任职于西安交通大学。聚焦半导体与集成电路领域材料的热膨胀和热传导难题，开发新型高热导与负热膨胀材料基电子封装材料，主要研究领域包括电子封装材料和同步辐射X射线结构分析。

Prof. Evan Ma

Title: Phase-change materials for memory and computing: XJTU solutions to speed and drift challenges

讲座题目：用于存储与计算的相变材料：西安交通大学应对速度与漂移难题的解决方案

Biography: Prof. Evan Ma is a foreign member of the European Academy of Sciences, an internationally renowned academic leader in the field of materials science, and recognized as one of the world’s top 100 materials scientists. He has been elected Fellow of four major professional societies: the Materials Research Society (MRS), ASM International (The Materials Information Society), the American Physical Society (APS), and The Minerals, Metals & Materials Society (TMS).

Prof. Ma has made a series of pioneering contributions to understanding the microstructures and properties of metallic glasses, nanostructured alloys, and high-entropy alloys. He has published over 400 academic papers, including 30 articles in top journals such as Science, Nature, Nature Materials, Nature Electronics, and Nature Reviews Materials. His publications have been cited 61,963 times (according to Google Scholar), with the most cited single paper receiving 3,835 citations. His h-index is 126.

He was listed as a Thomson Reuters Highly Cited Researcher from 2002 to 2012 and again from 2014 to 2016, and as an Elsevier Highly Cited Researcher in both 2022 and 2023.

简介： 马恩教授，欧洲科学院外籍院士，材料领域国际著名学术带头人，全球百大材料学家。入选美国材料学会MRS、美国金属学会ASM、美国物理学会APS、美国矿产、金属与材料学会TMS四大学会Fellow。马恩教授在揭示非晶合金、纳米结构合金、高熵合金的微观结构及其特性等方面做出了系列开创性工作。共发表超过400篇学术论文，其中30篇发表在Science、Nature、Nature Materials、Nature Electronics以及Nature Reviews Materials上。论文被引用61963次（Google Scholars），单篇最高3835次，H因子为126。2002-2012，2014-2016入选汤森路透全球高被引科学家名单，2022、2023入选Elsevier全球高被引科学家名单。

Prof. Lakshmi Narayan

Title: Additively Manufactured Inconel 718 and Stainless Steel 316L with Compositionally Graded Joints: Fabrication and Mechanical testing

讲座题目：增材制造Inconel 718与316L不锈钢成分梯度连接接头的制备与力学性能研究

Biography: Dr. R. Lakshmi Narayan completed his B. Tech. in Metallurgical and Materials Science Engineering at the VNIT, Nagpur, in India in 2008 and received his PhD from the IISc, Bangalore in 2014. He joined Carnegie Mellon University as a Postdoctoral Fellow in April 2015. During this time (2015-2017) he was also a visiting scientist in Xi’an Jiaotong University, Xi’an, China. In August 2018, he received the Gopalakrishnan-NTU Presidential Postdoctoral Fellowship in Nanyang Technological University, Singapore and worked with the Singapore Centre for 3D printing (SC3DP). He joined the Department of Materials Science and Engineering at IIT Delhi in August 2019 at IIT Delhi as an Assistant Professor and since December 2024 he is an Associate Professor. Dr. Lakshmi Narayan's research is focused on understanding the multiscale structure-property correlations in advanced materials such as 3D printed metals and alloys, Metallic glasses and their composites, and high temperature materials.

简介： R. Lakshmi Narayan 博士于 2008 年在印度那格浦尔的维什韦什瓦拉雅国家技术学院（VNIT）获得冶金与材料科学工程学士学位，并于 2014 年在印度科学研究院（IISc）班加罗尔获得博士学位。2015 年 4 月，他加入卡内基梅隆大学，担任博士后研究员。在 2015 至 2017 年期间，他还是西安交通大学材料学院的访问学者。2018 年 8 月，他获得新加坡南洋理工大学校长博士后奖学金，并在新加坡 3D 打印中心（SC3DP）从事研究。2019 年 8 月，他加入印度理工学院德里分校（IIT Delhi）材料科学与工程系，任助理教授，自 2024 年 12 月起升任副教授。Lakshmi Narayan 博士的研究重点在于理解先进材料（如 3D 打印金属与合金、金属玻璃及其复合材料、高温材料）中多尺度结构与性能之间的关系。

Prof. Jingqi Zhang

Title: 3D Printing of Titanium Alloys with Ultrauniform Mechanical Properties

讲座题目：3D打印高均匀性能钛合金

Biography: Dr. Jingqi Zhang is a professor in School of Materials Science and Engineering at Xi'an Jiaotong University (XJTU) and is also a Distinguished Young Scholar of the National Natural Science Foundation of China (Overseas). He graduated from Northeastern University (P.R. China) with BS and MS degrees in materials science and received his PhD in additive manufacturing of titanium alloys from The University of Queensland (UQ) in 2021. Afterward Jingqi continued his research as a postdoctoral fellow at UQ and joined XJTU in August 2024. His research interests rotate around additive manufacturing of metallic materials such as titanium alloys, aluminum alloys, copper alloys and refractory alloys. Over the past 5 years, Jingqi has published his work as the first author in reputable journals such as Science, Nature Communications, Scripta Materialia and Additive Manufacturing. His research has been recognized by multiple awards including 2021 Acta Student Award. Jingqi is also the youth editor of Journal of Materials Science & Technology and Advanced Powder Materials, respectively.

简介：张敬奇博士为西安交通大学材料学院教授，国家级青年人才（海外优青）。他本科和硕士毕业于东北大学，2021年于澳大利亚昆士兰大学获得博士学位，之后在昆士兰大学继续从事博士后研究，至2024年8月入职西安交通大学。他的研究兴趣主要围绕增材制造钛合金、铝合金、铜合金和难熔合金等。在过去五年中，他以第一作者（含共一）在Science、Nature Communications、Scripta Materialia和Additive Manufacturing等国际著名期刊上发表了系列研究成果。他曾获得2021年Acta学生奖（2021 Acta Student Award）和2024年首届国际APM“粉材新秀”青年学者杰出奖等荣誉与奖励。目前他还担任《Journal of Materials Science & Technology》和《Advanced Powder Materials》学术期刊的青年编委。

Prof. Matteo Seita

Title: The "Sorby Lecture": 160 years of metallography

讲座题目：“索比讲座”：金相学160年发展历程

Biography: Dr. Seita is the Granta Design Assistant Professor in the Department of Engineering at the University of Cambridge, where he leads the Additive Microstructure Engineering Laboratory (AddME Lab). Before joining the University of Cambridge, Dr. Seita was a Nanyang Assistant Professor at NTU Singapore. During his tenure at NTU, he was awarded the prestigious NRF Fellowship-a S$3M individual grant for early-career scientists-to develop novel additive manufacturing strategies for microstructure control of metal alloys. in recognition of this work, in 2023Dr. Seita received the TMs Young Innovator in the Materials Science of Additive Manufacturing Award from the Minerals, Metals & Materials Society. He earned his Ph.D.in Materials Science from ETH Zurich in 2012and then spent three years as a Postdoctoral Associate in the Department of Materials Science and Engineering at MIT. Dr. Seita is the author of over 50 publications and the co-founder and technical lead of the venture XtaLight, which provides simpler, faster, and more affordable microstructure analysis for quality control of metal parts.

简介： Matteo Seita 博士是剑桥大学工程系 Granta Design 助理教授，领导 Additive Microstructure Engineering Lab，专注于金属增材制造中的微观结构调控与性能优化。他在苏黎世联邦理工大学（ETH Zurich）获得材料科学博士学位，后于麻省理工学院（MIT）从事博士后研究，并曾在新加坡南洋理工大学任教，获国家研究基金博士后奖学金。他致力于开发快速、低成本的光学显微表征方法，如导向反射显微（DRM），用于晶体取向测量和质量控制，推动增材制造实现微结构可编程设计。他的研究成果广泛发表在《Nature Communications》《Additive Manufacturing》等期刊，并荣获 TMS “青年创新者奖”。他同时在剑桥圣约翰学院任教，开设“产品拆解”等实践课程，将科研成果与教学紧密结合，推进结构—性能—制造的深度融合。

Dr. Shubo Gao

Title: Advances in Metal Additive Manufacturing

讲座题目：金属增材制造进展

Biography: Dr Gao is a Senior Scientist from the Advanced Remanufacturing Technology Centre (ARTC) under Agency for Science, Technology and Research (A*STAR), Singapore. He received his B.Eng. and M.Eng. from University of Science and Technology Beijing, China, and his Ph.D. from Nanyang Technological University, Singapore. He was a Research Fellow in Singapore Centre for 3D Printing at NTU. His current research focuses on the design of metal additive manufacturing process and the development of advanced structural alloys. His has published over 30 research articles in reputable international journals, including Nature Communications, Materials Today, Acta Materialia, and Advanced Materials.

简介：高博士现任新加坡科技研究局（A*STAR）先进再制造技术中心（ARTC）的高级科学家。他先后获得中国北京科技大学的工学学士与硕士学位，并于新加坡南洋理工大学取得博士学位。曾在新加坡南洋理工大学的3D打印中心（SC3DP）担任研究员。高博士目前的研究方向包括金属增材制造工艺的设计与先进结构合金的开发。他在《Nature Communications》《Materials Today》《Acta Materialia》《Advanced Materials》等国际权威期刊上发表论文30余篇，在金属3D打印和材料设计领域具有深厚的学术积累与影响力。

Prof. Xipeng TAN

Title: Fundamentals of metal additive manufacturing microstructure engineering

讲座题目：金属增材制造微观组织工程

Dr. Tan Xipeng is currently a tenure-track Assistant Professor in the Department of Mechanical Engineering, National University of Singapore. He also holds the courtesy joint appointment in the Department of Materials Science and Engineering. He received his PhD in materials science from the Institute of Metal Research (Shenyang IMR), Chinese Academy of Sciences in 2013. After his postdoctoral training on atom probe tomography in France, he joined the Nanyang Technology University as a Senior Research Fellow working on metal additive manufacturing. Dr. Tan’s main research interest lies in microstructure design and control strategies for high-performance metal additive manufacturing. He published more than 60 peer-reviewed journal papers in metallurgy and additive manufacturing, such as Nature Communications, Acta Materialia, NPG Asia Materials, Additive Manufacturing, Scripta Materialia, etc., including 8 Highly Cited Papers in terms of Web of Science. His recent publications have received more than 8000 citations in Google Scholar. He delivered more than 10 invited talks in the international conferences and workshops in the past 5 years. He is an editorial board member of Advanced Powder Materials.

谭喜鹏博士现任新加坡国立大学机械工程系的终身教职助理教授，并兼任材料科学与工程系的荣誉联合任职。他于2013年在中国科学院金属研究所（沈阳）获得材料科学博士学位。博士后期间，他在法国从事原子探针断层扫描方面的研究。随后，他加入南洋理工大学，担任高级研究员，从事金属增材制造方向的研究。

谭博士的主要研究兴趣聚焦于高性能金属增材制造中的微观组织设计与调控策略。他在冶金和增材制造领域共发表了60余篇同行评审期刊论文，期刊包括《Nature Communications》、《Acta Materialia》、《NPG Asia Materials》、《Additive Manufacturing》、《Scripta Materialia》等，其中有8篇被Web of Science评为高被引论文。其近年发表的论文在Google Scholar上的引用次数超过8000次。

过去五年中，他在国际会议与研讨会中应邀作报告超过10次。目前，他是《Advanced Powder Materials》期刊的编委会成员。

Prof. Turab Lookman

Title: Materials Informatics: Its emergence and application to materials science

讲座题目：材料信息学：其兴起与在材料科学中的应用

Biography: Turab Lookman obtained his B.Sc., Ph.D. degrees from Kings College, University of London, and held appointments at Western University, London, Ontario, and the University of Toronto in Canada until 1998. He was then at the Theoretical Division at Los Alamos National Laboratory till 2019, where he was elected Fellow of the American Physical Society (APS) in 2012 and a Laboratory Fellow in 2018. His interests and expertise lie in hard and soft condensed matter physics, materials science, applied mathematics and computational methods. His work on information directed approaches to materials discovery started in 2012 when he led an LDRD-DR funded by DOE to investigate how ML tools could be applied to accelerate materials discovery.

简介：Turab Lookman 在英国伦敦大学国王学院获得了学士和博士学位。他曾在加拿大的西安大略大学（Western University，安大略省伦敦市）和多伦多大学任职，直到1998年。此后，他加入了洛斯阿拉莫斯国家实验室理论部，并工作至2019年。在此期间，他于2012年当选为美国物理学会（APS）会士，并于2018年被授予实验室院士（Laboratory Fellow）荣誉。

他的研究兴趣与专长涵盖硬凝聚态与软凝聚态物理、材料科学、应用数学以及计算方法。自2012年起，他开始致力于基于信息导向的方法进行材料发现的研究，并牵头了由美国能源部（DOE）资助的实验室定向研究与开发项目（LDRD-DR），探索如何利用机器学习工具加速材料发现过程。

Prof. Yu Jun TAN

Title: Exploring Stimuli-Responsive Materials for Soft Robotics

讲座题目：用于软体机器人的刺激响应材料研究

Biography: Yu Jun TAN (National University of Singapore) is an assistant professor in the Department of Mechanical Engineering at NUS. She serves as a principal investigator at the NUS Centre for Additive Manufacturing (AM.NUS) and Advanced Robotics Centre (ARC). She received her Ph.D. from Nanyang Technological University, specializing in additive manufacturing and biomaterials. Following her doctoral studies, she pursued postdoctoral research in the fields of stretchable and self-healing electronics.

Dr. Tan has authored over 40 peer-reviewed articles in journals, including Nature Materials, Nature Electronics, Nature Communications, Science Robotics, Science Advances, and Advanced Materials. Her work has not only been published but also featured on journal covers and highlighted in various news articles and documentaries.

She actively organizes symposia at international conferences, such as the Materials Research Society (MRS) and the International Conference on Materials for Advanced Technologies (ICMAT). She also contributes as a reviewer for international grant funding agencies and leading journals.

Her current research interests include stimuli-responsive materials and biomaterials, focusing on their applications in soft robotics.

简介： Yu Jun TAN，新加坡国立大学机械工程系的助理教授。她是NUS增材制造中心（AM.NUS）和先进机器人中心（ARC）的首席研究员。她在南洋理工大学获得博士学位，研究方向为增材制造与生物材料。陈博士已在《Nature Materials》《Nature Electronics》《Nature Communications》《Science Robotics》《Science Advances》《Advanced Materials》等国际知名期刊上发表了40余篇经同行评审的论文。她的研究成果不仅发表在顶级期刊，还曾登上期刊封面，并被多家新闻媒体和纪录片报道与关注。她积极参与组织国际会议的专题研讨会，如材料研究学会（MRS）年会和先进材料国际会议（ICMAT）。同时，她也为多个国际科研资助机构和顶尖期刊担任审稿人。她目前的研究兴趣包括刺激响应材料与生物材料，重点探索其在软体机器人领域的应用。