1) J.X. Zhang, Y. Xue, S.L. Gong, Residual welding stresses in laser beam and tungsten inert gas weldments of titanium alloy, Science and Technology of Welding and Joining, 10 (2005) 643-646.
2) L.J. Zhang, J.X. Zhang, A.Q. Duan, S.L. Gong, Numerical and experimental study of the effect of side assisting gas during laser welding, Modelling and Simulation in Materials Science and Engineering, 14 (2006) 875-890.
3) L.J. Zhang, J.X. Zhang, H. Serizawa, H. Murakawa, Parametric studies of welding distortion in fillet welded structure based on FEA using iterative substructure method, Science and Technology of Welding and Joining, 12 (2007) 703-707.
4) C. Liu, J.X. Zhang, Numerical simulation of transient welding angular distortion with external restraints, Science and Technology of Welding and Joining, 14 (2009) 26-31.
5) R. Wang, J.X. Zhang, H. Serizawa, H. Murakawa, Study of welding inherent deformations in thin plates based on finite element analysis using interactive substructure method, Materials and Design, 30 (2009) 3474-3481.
6) R. Wang, J.X. Zhang, C. Liu, H. Serizawa, H. Murakawa, Welding distortion investigation in fillet welded joint and structure based on iterative substructure method, Science and Technology of Welding and Joining, 14 (2009) 396-403.
7) C. Liu, J.X. Zhang, B. Wu, S. Gong, Numerical investigation on the variation of welding stresses after material removal from a thick titanium alloy plate joined by electron beam welding, Materials and Design, 34 (2012) 609-617.
8) B. Wu, J.X. Zhang, L. Zhang, Y.S. Pyoun, R.I. Murakami, Effect of ultrasonic nanocrystal surface modification on surface and fatigue properties of quenching and tempering S45C steel, Applied Surface Science, 321 (2014) 318-330.
9) Q.B. Zhang, J.X. Zhang, P. Zhao, Y. Huang, Y. Yang, Y. Zhao, Microstructure of 10% Cr martensitic heat-resistant steel welded joints and type IV cracking behavior during creep rupture at 650°C, Materials Science and Engineering A, 638 (2015) 30-37.
10) X.Y. Fang, J.X. Zhang, Effects of microstructure and concavity on damage behavior of laser beam welded Ti-2Al-1.5Mn titanium alloy joints, International Journal of Advanced Manufacturing Technology, 79 (2015) 1557-1568.
11) N.N. Gou, J.X. Zhang, L.J. Zhang, Z.G. Li, Z.Y. Bi, Single pass fiber laser butt welding of explosively welded 2205/X65 bimetallic sheets and study on the properties of the welded joint, International Journal of Advanced Manufacturing Technology, (2016) 1-11.
12) Q.B. Zhang, J.X. Zhang, P. Zhao, Y. Huang, Z. Yu, X. Fang, Low-cycle fatigue behaviors of a new type of 10% Cr martensitic steel and welded joint with Ni-based weld metal, International Journal of Fatigue, 88 (2016) 78-87.