• Jianjiang Tang, Yu Bai, Kun Liu, P. Zhang,
Benqiang Li, Jian-Feng Yang,
Microstructural Evolution of SAPS/HVOF CoNiCrAlY Alloy Coating During Thermal
Cycling Test, OXIDATION OF METALS, 86[1-2] 75-87 (2016)
• Dejun Zeng, Haihong Zhang, Jianfeng Yang, Bo Wang, Xiaolin Zhang,
Microstructure and property of porous mullites with a whiskers framework obtained
by a sol-gel process, CERAMICS INTERNATIONAL, 42[9] 11270-11274(2016)
• Xinghua Yang, Jianguang Bai, Wenjia Jing, Bo
Wang, Jian-Feng Yang, Strengthening
of low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation
of cBN abrasives, CERAMICS INTERNATIONAL, 42[7] 9283-928 (2016)
• Yuan Lu, Jinglong Li, Jian-Feng Yang, Xun Li, The Fabrication and Properties of the
Squeeze-Cast TiN/Al Composites, MATERIALS AND MANUFACTURING PROCESSES, 31 [10]
1306-1310 (2016)
• Yaming Zhang, Haihong Zhang, Jian-Feng Yang, Gangqiang Geng, Erosion
Resistance and Interface Properties of Epoxy Composite Filled With Graded
Silicon Carbide, POLYMERS & POLYMER COMPOSITES, 24 [2]161-166 (2016) Kuo
Zhang, Zhongqi Shi, Hongyan Xia, Ke Wang, Guiwu Liu, Guanjun Qiao, Jian-Feng
Yang, Preparation and thermophysical properties of directional SiC/Cu-Si
composite via spontaneous infiltration, CERAMICS INTERNATIONAL, 42 [1] 996-1001
(2016)
• Hui Zhang, Zhilong He, Yaming Zhang, Wenjia
Jing, Bo Wang, Jian-Feng Yang,
Lithium Disilicate Glass-Ceramics by Heat Treatment of Lithium Metasilicate
Glass-Ceramics Obtained by Hot Pressing, JOURNAL OF THE AMERICAN CERAMIC
SOCIETY, 98[12] 3659-3662(2015)
• Zhenhong Wen, Yu Bai, Jian-Feng Yang, J. Huang, L. Zhang, Effect of vacuum remelting on
microstructure and wear resistance of NiCrMoY coatings deposited by supersonic
atmospheric plasma spraying, SURFACE & COATINGS TECHNOLOGY, 281, 62-67
(2015)
• Yi Qin, Ting Zhao, Bo Wang, Jian-Feng Yang, Deposition Time
Dependent Size of Si Quantum Dots Embedded in Amorphous SiC Matrix, Journal of
Nanoscience and Nanotechnology, 15 [9] 7346-7350 (2015)
• Dejun Zeng, Haihong Zhang, Bo Wang, Kezheng
Sang, and Jianfeng Yang, Effect of
Ammonia Concentration on Silica Spheres Morphology and Solution Hydroxyl
Concentration in Stober Process Journal
of Nanoscience and Nanotechnology, 15[9], 7407-7411 (2015)
• Ting Zhao, Yi Qin, Bo Wang, and Jian-Feng Yang, Comparative Study of
Hydrogen and Argon Dilution Effects in Amorphous SiC Thin Films Deposited by
Plasma Enhanced Chemical Vapor Deposition, Journal of Nanoscience and
Nanotechnology, 15, 7371-7375 (2015)
• HaiHong Zhang, YaLi Xu, Bo Wang, Xiao Zhang, Jianfeng Yang, Koichi Niihara, Effects
of heating rate on the microstructure and mechanical properties of rapid vacuum
sintered translucent alumina, CERAMICS INTERNATIONAL, 41[9] 12499-12503
(2015)
• Yingying Zhao, Hongyan Xia, Rui Tang, Zhongqi
Shi, Jianfeng Yang, Jiping Wang, A
low cost preparation of C/SiC composites by infiltrating molten Si into
gelcasted pure porous carbon preform, CERAMICS INTERNATIONAL, 41[5] 6478-6487
(2015)
• Haihong Zhang, Yaming Zhang, Bo Wang, Jianfeng Yang, Preparation and
characterization of continuous alumina based fiber reinforced with orientated
mullite whisker, CHEMICAL ENGINEERING JOURNAL, 268, 109-115 (2015)
• Bo Wang, Zhao-Yun Xu, Feng Jin, Jian-Feng Yang, Kozo Ishizaki,
Synthesis of rod-like beta-Si3N4 seed crystals with tailored morphology,
CERAMICS INTERNATIONAL, 41[4] 5348-5354 (2015)
• Bo Wang, Hui Zhang, Hoang-Tuan Phuong, Feng
Jin, Jian-Feng Yang, Kozo Ishizaki,
Gas permeability and adsorbability of the glass-bonded porous silicon carbide
ceramics with controlled pore size,CERAMICS INTERNATIONAL, 41[2] 2279-2285
(2015)
• Ting Zhao, Yi Qin, Bo Wang, Jian-Feng Yang, Improved densification
and properties of pressureless-sintered lithium disilicate glass-ceramics,
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
MICROSTRUCTURE AND PROCESSING, 620, 399-406 (2015)
• Kuo Zhang, Zhongqi Shi, Hongyan Xia, Ke Wang,
Guiwu Liu, Guanjun Qiao, Jian-Feng Yang,
Preparation and thermophysical properties of directional SiC/Cu-Si composite
via spontaneous infiltration, Ceramics International, June 20, 2015 Article in
Press
• Jianguang Bai, Xinghua Yang, Shaochun Xu,
Wenjia Jing, Jian-Feng Yang,
Preparation of foam glass from waste glass and fly ash, MATERIALS LETTERS, 136,
52-54 (2014)
• Zhaoyun Xu, Bo Wang, Jian-Feng Yang, Zhongjian Zhao, Preparation of Porous Si3N4
Ceramics with Controlled Porosity and Microstructure by Fibrous alpha-Si3N4
Addition, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97(11) 3392-3395 (2014)
• Pei Zhang, Xinghua Li, Jian-Feng Yang, Shaochun Xu, Effect of heat treatment on the microstructure
and properties of lithium disilicate glass-ceramics, JOURNAL OF NON-CRYSTALLINE
SOLIDS, 402, 101-105 (2014)
• Wanli Yang, Zhongqi Shi, Hailong Wang,
Guanjun Qiao, Yongfeng Li, Jian-Feng
Yang, Zhihao Jin, Effects of ZrO2 on the Nitridation Behavior and
Mechanical Properties of Reaction-Bonded Si3N4/h-BN Composite, JOURNAL OF
MATERIALS ENGINEERING AND PERFORMANCE, 23[10] 3436-3443 (2014)
• Ting Zhao, Yi Qin, Pei Zhang, Bo Wang, Jian-Feng Yang, High-performance,
reaction sintered lithium disilicate glass-ceramics, CERAMICS INTERNATIONAL,
40[8] 12449-12457 (2014)
• Bo Wang, Zhao-Yun Xu, Wei-Zhong Lu, Feng Jin, Jian-Feng Yang, Koichi Niihara,
Effect of porous Si3N4 preform on the mechanical properties of Si3N4/Al
composites with interpenetrating network structure, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
PROPERTIES MICROSTRUCTURE AND PROCESSING, 607, 307-312 (2014)
• Bo Wang, Yi Qin, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Pulse
electric current sintering of cubic boron nitride/tungsten carbide-cobalt
(cBN/WC-Co) composites: Effect of cBN particle size and volume fraction on
their microstructure and properties, MATERIALS SCIENCE AND ENGINEERING
A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 607, 490-497(2014)
• Pei Zhang, Xinghua Li, Jian-Feng Yang, Shaochun Xu, The crystallization and microstructure
evolution of lithium disilicate-based glass-ceramic, Journal of Non-Crystalline Solids, 392, 26-30
(2014)
• Kezheng Sang, Jian-Feng Yang, Wenpeng Shi, Hongyang Sun, Preparation of coatings
on alumina ceramic for wettability, Ceramics International, 40[4] 5659-5663
(2014)
• Bo Wang, Shao-Chun Xu, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Koichi
Niihara, Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous
ceramics with near zero thermal expansion, Ceramics International, 40[2]
2853-2856 (2014)
• Haihong Zhang, Dejun Zeng, Bo Wang, Jian-Feng Yang, Preparation and
characteristics of spinnable sol and continuous mullite fibers with nano silica
addition, Journal of Sol-Gel Science and Technology, 69[2] 311-319 (2014)
• Haihong Zhang, Yong Hang, Yi Qin, Jian-Feng Yang, Bo Wang, Synthesis and
characterization of sol-gel derived continuous spinning alumina based fibers
with silica nano-powders, Journal of the European Ceramic Society, 34[2]
465-473 (2014)
• Yi Qin, Ting Zhao, Bo Wang, Pengxiang Zhang, Jian-Feng Yang, Development of a
transverse thermoelectric voltage effect in artificial SrTiO3/SrTi1-xNbxO3
epitaxial multilayer films with incline-oriented sublayers, Crystengcomm,
16[24] 5345-5351 (2014)
• Wang, Bo; Yang, Xing-Hua; Zeng, De-Jun; Jian-Feng Yang, Kozo Ishizaki, Koichi
Niihara, Effect of glassy bonding materials on the properties of LAS/SiC porous
ceramics with near zero thermal expansion, Journal of the European Ceramic
Society, 34[1] 97-101 (2014)
• Yi Qin, Ting Zhao, Hai-Hong Zhang, Bo Wang,
Peng-Xiang Zhang, Jian-Feng Yang,Large transverse thermoelectric voltage effect in
incline-oriented SrTi1-xNbxO3 films with cubic structure,Applied Physics Letters, 102[25] 253901 (2013)
• L. Zhao, Y. Bai, J. J. Tang, K. Liu, C. H.
Ding, Jian-Feng Yang, Z. H. Han,
Effect of particle in-flight behavior on the composition of thermal barrier
coatings, Applied Surface Science, 286, 184-191 (2013)
• Yonggui Shi, Xinghua Yang, Dong Wang, Peng
Zhang, Jincheng Zhang, Yue Hao, Jian-Feng
Yang, Enlargement of Silicon Carbide Lely Platelet by Physical Vapor
Transport Technique, Materials and Manufacturing Processes, 28 [11] 1248-1252
(2013)
• Liang, Sen; Zhang, Xiao; Li, Haibo; Luo, Min;
Li, Jin; He, Lijun; Jian-Feng Yang,
FABRICATION AND CHARACTERIZATION OF Ni-Mn-Si-Al-O NTC THERMISTOR AND ITS
APPLICATION AS TEMPERATURE WIRE SENSOR, Functional Materials Letters, 6 [4]
1350039 (2013)
• Bai, Jianguang; Yang, Xinghua; Xu, Shaochun;
Shi, Yonggui; Jian-Feng Yang,
Fabrication of highly dense Al2O3 ceramics, Scripta Materialia, 68[6] 393-395
(2013)
• Bai, Y.; Tang, J. J.; Qu, Y. M.; Ma, S. Q.;
Ding, C. H.; Jian-Feng Yang; Yu, L.;
Han, Z. H., Influence of original powders on the microstructure and properties
of thermal barrier coatings deposited by supersonic atmospheric plasma
spraying, Part I: Microstructure, Ceramics International, 39[5] 5113-5124
(2013)
• Bai, Y.; Zhao, L.; Tang, J. J.; Ma, S. Q.;
Ding, C. H.; Jian-Feng Yang; Yu, L.;
Han, Z. H., Influence of original powders on the microstructure and properties
of thermal barrier coatings deposited by supersonic atmospheric plasma
spraying, part II: Properties, CERAMICS INTERNATIONAL, 39[4] 4437-4448
(2013)
• Rongzhen Liu, Guiwu Liu, Jianfeng Yang, Haiyun Jin, Yuan Lu, Wenwei Gu, Effect of removal of
silicon on preparation of porous SiC ceramics following reaction bonding and
recrystallization, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 552, 9-14 (2012)
• Bo Wang, Koji Matsumaru, Jianfeng Yang, Zhengyi Fu, Kozo Ishizaki, The Effect of cBN
Additions on Densification, Microstructure and Properties of WC-Co Composites
by Pulse Electric Current Sintering, JOURNAL OF THE AMERICAN CERAMIC SOCIETY,
95(8), 2499-2503 (2012)
• Qian Zhang, Litong Guo, Tianwen Guo, Jianfeng Yang, Influence of Sn on the
adhesion between titanium and porcelain, MATERIALS LETTERS, 79, 300-302
(2012)
• Jun Li, Jianfeng
Yang, Guagjun Qiao, Effect of Bonding Temperature on Microstructure and
Strength of W/CuCrZr Alloy Joints Diffusion Bonded with a Ti Interlayer, RARE
METAL MATERIALS AND ENGINEERING, 41(7) 1235-1238 (2012)
• Yong-gui Shi, Pei-yun Dai, Jianfeng Yang, Zhi-hao Jin, Hu-lin Liu,
Effect of 6H-SiC crystal growth shapes on thermo-elastic stress in the growing
crystal, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 19(7)
622-627 (2012)
• Xiao Zhang, Sen Liang, Pei Zhang, Ting Zhao,
Yu Bai, Chong-Gao Bao, Jianfeng Yang,
Guan-Jun Qiao, Fabrication of Transparent Alumina by Rapid Vacuum Pressureless
Sintering Technology, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95(7) 2116-2119
(2012)
• J. M. Li, J. Y. Yin, C. Cai, Z. Zhang, J. F.
Li, Jianfeng Yang, M. Z. Xue, Y. G.
Liu, Corrosion behavior of nanostructured Ni-Si3N4 composite films: A study of
electrochemical impedance spectroscopy, MATERIALS AND CORROSION-WERKSTOFFE UND
KORROSION, 63 (7) 620-626 (2012)
• Jianguang Bai, Xinghua Yang, Yonggui Shi,
Shaochun Xu, Jianfeng Yang,
Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming
agent, MATERIALS LETTERS, 78, 192-194 (2012)
• Yonggui Shi, Jianfeng Yang, Hulin Liu, Peiyun Dai, Bobo Liu, Zhihao Jin, Guanjun
Qiao, Hailiang Li, Fabrication and mechanism of 6H-type silicon carbide
whiskers by physical vapor transport technique, JOURNAL OF CRYSTAL GROWTH,
349(1) 68-74 (2012)
• Bo Wang, Koji Matsumaru, Jianfeng Yang, Zhengyi Fu, Kozo Ishizaki, Mechanical behavior of
cellular borosilicate glass with pressurized Ar-filled closed pores, ACTA
MATERIALIA, 60(10) 4185-4193 (2012)
• Chao Cai, Zhao Zhang, Zhong-ling Wei, Jianfeng Yang, Jin-feng Li,
Electrochemical and corrosion behaviors of pure Mg in neutral 1.0% NaCl
solution, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 22(4) 970-976
(2012)
• Qiongxi Liu, Jianfeng Yang, The Ultimate Stress of Small Grain Shellproof
Ceramic Composite, FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6,
Applied Mechanics and Materials, 121-126, 524-528 (2012)
• Yu Bai, Fang Li Yu, Soo Wohn Lee, Huang Chen, Jianfeng Yang, Characterization of
the Near-Eutectic Al2O3-40wt% ZrO2 Composite Coating Fabricated by Atmospheric
Plasma Spray. Part II: Microstructure and Mechanical Properties of
Nanocomposite Coating, MATERIALS AND MANUFACTURING PROCESSES, 27(1) 58-64
(2012)
• Yonggui Shi, Peiyun Dai, Jianfeng Yang, Zhihao Jin, Jikuan Cheng, Hulin Liu, Effects of
Grain Size of Source Material on Growing 6H-SiC Bulk Crystal by Physical Vapor
Transport, MATERIALS AND MANUFACTURING PROCESSES, 27(1) 84-87 (2012)
• Jian Zhang, Jun Yang, Langtao Zhu, Zhihai
Han, Jianfeng Yang, Yu Bai,
Microstructure and thermal shock resistance of Cr2O3 ceramic coatings deposited
by supersonic atmosphere plasma spraying, Journal of the Chinese Ceramic
Society, 40[9] 1356-1362 (2012)
• Chang Chen, Dongping Tian, Jianfeng Yang, Guanjun Qiao, Tingshu
He, Yonghua Wu, High-temperature performance of porous Fe-Cr-Ni matrix
composites reinforced with nano-particles of Al2O3, Journal of the Chinese
Ceramic Society, 40 [7] 1040-1045 (2012)
• Fang-Li Yu, Yu Bai, Jun Du, Huan-Rui Wang, Jianfeng Yang, Study on the
microstructure, mechanical properties and gas permeability of porous Si3N4
ceramics, Journal of Synthetic Crystals, 41 [3] 656-660 (2012)
• J. Li, J.-F.
Yang, J.-L. Chen, “High heat load properties of actively cooled W/CuCrZr
mock-ups by diffusion bonding with Ni or Ti interlayer”, Fusion Engineering and
Design, 86 [12] 2874-2878 (2011)
• C. Chen, C. Y. Chu, J.F Yang, C. G. Bao, G. J. Qiao, D. P. Tian, B. Wang, K. Ishizaki,
K. Niihara, “Effect of raw materials on microstructure and bending strength of
porous in situ MgO/Fe-Cr-Ni composites”, Materials Science and Engineering
A-Structural Materials Properties Microstructure and Processing, 528 [29-30]
8438-8442 (2011).
• J. Li, J.-F.
Yang, J.-L. Chen, “High heat load properties of actively cooled W/CuCrZr
mock-ups by cladding and diffusion bonding with a two-step process”, Journal of
Nuclear Materials, 418 [1-3] 110-114 (2011).
• S. Liang, J.F Yang, X. Zhang, Y. Bai, “The Thermal-Electrical Properties of
Polyvinyl Alcohol/AgNO(3) Films”, Journal of Applied Polymer Science, 122[2]
813-818 (2011)
• S. Liang, X. Zhang, Y. Bai, Z. H. Han, J.F Yang, “Study on the preparation and
electrical properties of NTC thick film thermistor deposited by supersonic
atmospheric plasma spraying”, Applied Surface Science, 257[23] 9825-9829
(2011)
• P. Y. Dai, Y. Z. Wang, G. L. Liu, B. Wang, Y.
G. Shi, J. F. Yang, G. J. Qiao and
H. J. Wang, “Fabrication of Highly Dense Pure SiC Ceramics via the HTPVT
Method”, Acta Materialia, 59[16] 6257-6263 (2011)
• S. Liang, J. F Yang, X. H. Yi, X. Zhang, Y. Bai, An efficient way to improve
the electrical stability of Ni(0.6)Si(0.2)Al(0.6)Mn(1.6)O(4) NTC thermistor,
Ceramics International, 37[7] 2537-2541 (2011)
• C. Cheng, J. F Yang, C. Y. Chu, G. J. Qiao, C. G. Bao, “Porous
nano-Al(2)O(3)/Fe-Cr-Ni composites fabricated by pressureless reactive
sintering,” Materials Chemistry and Physics, 128[1-2] 24-27 (2011)
• Y. Bai, Z.H. Han, H. Q. Li, C. Xu, Y. L. Xu,
Z. Wang, C. H. Ding, J. F.Yang “High
performance nanostructured ZrO2 based thermal barrier coatings deposited by
high efficiency supersonic plasma spraying”,
Applied Surface Science,257[16]7210-7216
(2011)
• P. Y. Dai, Y. G. Shi, J. F. Yang, Y. Z. Wang, J. K. Cheng and H. J. Wang, “Restraint of
Nucleation of SiC Polycrystals Surrounding the Seed during SiC Single Crystal
Growth”, Journal of Materials Science, 46[13] 4618-4621 (2011)
• H. B. Tan, Y. P. Ding, J. F. Yang, “Activation energy of mullite crystallisation from
precursor fibres determined by differential scanning calorimetry”, Materials
Science and Technology, 27 [5] 933-936 (2011)
• G. L. Liu, P. Y. Dai, Y. Z. Wang, J. F. Yang and Y. B. Zhang,
“Fabrication of Wood-like Porous Silicon Carbide Ceramics without Templates”,
Journal of the European Ceramic Society, 31[5] 847-854 (2011)
• Z. C. Zhan, P. Zhang, L.T Guo, T.W. Guo, J.F. Yang, “Effect of TiO2-SiO2 sol-gel
coating on the cpTi-porcelain bond strength” Materials Letters, 65[7] 1082-1085(2011)
• Y. Bai, Z.H. Han, H.Q. Li;C. Xu, Y.L Xu, C.H Ding, J. F. Yang, “Structure-property
differences between supersonic and conventional atmospheric plasma sprayed
zirconia thermal barrier coatings” Surface and Coatings Technology,205[13-14]
3833-3839 (2011)
• G. L. Liu, P. Y. Dai, Y. Z. Wang, J. F. Yang and G. J. Qiao: “Fabrication
of Pure SiC Ceramic Foams Using SiO2 as a Foaming Agent via High-Temperature
Recrystallization”, Materials Science and Engineering A-Structural Materials
Properties Microstructure and Processing, 528 [6] 2418-2422 (2011)
• C. Chen, J.
F. Yang, C.Y. Chu, “Effect of MgO content on the microstructure and
mechanical properties of Fe-Cr-Ni/MgO composites produced by reactive hot
pressing” Materials Science and Engineering A-Structural Materials Properties
Microstructure and Processing, 528 [6] 2995-2998 (2011)
• C. Cai, X.B. Zhu, G.Q. Zheng, Y.N. Yuan, X.O.
Huang, F.H. Cao, J. F. Yang Z.
Zhang, “Electrodeposition and characterization of nano-structured Ni-SiC
composite films” Surface and Coatings Technology, 205[11] 3448-3454 (2011)
• H.B .Tan, Y. B. Zhang, Y.P. Ding, J. F. Yang “Preparation of mullite
fibres by sol-gel processes using aluminium carboxylates and
tetraethylorthosilicate” Materials Science and Technology, 27 [2] 568-572
(2011)
• Y.B. Zhang, C.F. Xiao, S.L. An, J.F. Yang, “A morphological study of
mullite long fiber prepared using polyvinyl butyral as spinning aids”, Journal of Sol-Gel Science and Technology,
57[2] 142-148 (2011)
• Jin Haiyun, Huang Yinmao, Feng Dawei, He Bo,
Yang Jianfeng, Oxidation Behavior of AlN/h-BN Nano Composites at High
Temperature, Conference Series-Materials Science and Engineering, (3rd
International Congress on Ceramics (ICC3) 会议地点:
Osaka, JAPAN 会议日期: NOV 14-18, 2010) 卷: 18 文献号:
202022 DOI: 10.1088/1757-899X/18/20/202022出版年:
2011
• H.B. Tan, Y. P. Ding, J. F. Yang, “Synthesis and Characterization of Rich Silica Mullite
Fibers by Sol-Gel Method Using Aluminum Lactate and Silica Sol”, Advanced
Composite Materials, 20[5] 477-486 (2011)
• Y.B. Zhang, Y.P. Ding, Y. Li, J.Q. Gao, J. F. Yang, L.T. Guo, “Mullite Fibers
Prepared by Sol-Gel Method Using Aluminum Chloride Aluminum Isopropoxide and
Tetraethylorthosilicate” Materials and Manufacturing Processes, 26[4]
649-653(2011)
• Y. Bai, S.W. Lee, H. Chen, F.L. Yu, J. F. Yang “Characterization of the
Near-Eutectic Al2O3-40wt% ZrO2 Composite Coating Fabricated by Atmospheric
Plasma Spray. Part I: Preparation and Characterization of Nano Al2O3-ZrO2
Powder Using Sol-Gel Method”, Materials and Manufacturing Processes, 26[2]330-337
(2011)
• Y.B. Zhang, Y.P. Ding, Y. Li, J.Q. Gao, J.F. Yang, L.T. Guo, “Synthesis and
characterisation of alumina fibres using organic/inorganic composite sol”
Materials Science and Technology, 27[1] 264-267 (2011)
• F.L. Yu, H.R. Wang, Y. Bai, J.F. Yang, Preparation and
characterization of porous Si3N4 ceramics prepared by compression molding and
slip casting methods, BULLETIN OF MATERIALS SCIENCE, 33[5 ] 619-624(2010)
• F.L. Yu, J.F.
Yang, Delsing, ACA,. Preparation, characterization and luminescence
properties of porous Si3N4 ceramics with Eu2O3 as sintering additive JOURNAL OF
LUMINESCENCE, 130 [12] 2298-2304 (2010)
• Y .Lu, J.F.
Yang, W.Z.Lu, Synthesis of Porous Silicon Nitride Ceramics from Diatomite
MATERIALS AND MANUFACTURING PROCESSES 25[9]998-1000(2010)
• H.W. Li, H.Y. Jin, Q. Zhang, J.F. Yang, Z.H. Jin, SiC/C machinable
ceramics surface hardening by silicon infiltrationSCRIPTA MATERIALIA 63[12]1177-1180(2010)
• Y.B .Zhang, C.F. Xiao, S.L. An, J.F. Yang, S.J. Xu, Characterization of
Defects of Mullite Fibers Prepared by Polyvinyl Butyral as Spinning Aid SCIENCE
OF SINTERING,42[2] 203-210 (2010)
• F.L. Yu, H.R. Wang, J.F. Yang, Effects of organic additives on microstructure and
mechanical properties of porous Si3N4 ceramics BULLETIN OF MATERIALS SCIENCE,
33 [3] 285-291 (2010)
• L.T. Guo, X.C Liu, J.Q. Gao, J.F. Yang, T.W. Guo, Y.B. Zhu, Effect
of Surface Modifications on the Bonding Strength of Titanium-Porcelain
MATERIALS AND MANUFACTURING PROCESSES, 25[8] 710-717 (2010)
• Y. Lu, J.F.
Yang, W.Z.Lu, The mechanical properties of co-continuous Si3N4/Al
composites manufactured by squeeze casting MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES
MICROSTRUCTURE AND PROCESSING, 527[23] 6289-6299 (2010)
• H.B. Tan, Y.P. Ding, J.F. Yang, Mullite fibres preparation by aqueous sol-gel process
and activation energy of mullitizationJOURNAL OF ALLOYS AND COMPOUNDS, 492 [1-2] 396-40(2010)
• G.P. Jiang, J. F. Yang, J.Q. Gao, Extrusion of porous silicon nitride using
different binders JOURNAL OF CERAMIC PROCESSING RESEARCH 11 [1]126-128 (2010)
• H.B. Tan, Y.P. Ding, J. F. Yang, Mullite fibers prepared from an inorganic sol-gel
precursor, JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 53 [2] 378-383 (2010)
• Y.F. Li, P. Liu, X.D. Wang, H.Y. Jin, J. F. Yang, G.J. Qiao, Interface
structure and formation mechanism of BN/intergranular amorphous phase in
pressureless sintered Si3N4/BN composites, SCRIPTA MATERIALIA 63[2]185-188 (2010)
• H. B. Tan, Y. P. Ding, J. F. Yang, Mullite fibers prepared from an inorganic sol-gel
precursor, J. Sol-Gel Sci. Technol., 53[2]378-383(2010)