1.
Y.Arata, A.Ohmori and C.-J. Li, 1986, Basic study on
properties of plasma sprayed ceramic coatings, Trans. Jpn. Weld. Res. Inst.,
Vol.15, pp.339-348.
2.
Y.Arata, A.Ohmori and C.-J. Li, 1987, Characteristics of
metal electroplating to plasma sprayed ceramic coatings, Trans. Jpn. Weld. Res. Inst.,
Vol.16, pp.259-265.
3.
Y.Arata, A.Ohmori and C.-J. Li, 1988, Electrochemical method
to evaluate the connected porosity in ceramic coatings, Thin Solid Films,
Vol.156, pp.315-325.
4. 荒田吉明，大森明，李长久,
1988, アルミナ溶射皮膜の物性と构造，日本高温学会志，Vol.14,
pp.220-233, (In Japanese).
5.
Y.Arata, A.Ohmori and C.-J. Li, 1988, Fracture Behaviour of
plasma sprayed ceramic coatings in scratch test, Trans. Jpn. Weld. Res. Inst.,
Vol.17, pp.311-315.
6. 大森明，李长久， 荒田吉明，井上敬胜，岩本信也，1990, アルミナ溶射皮膜の贯通气孔率の皮膜构造依存性，（日本）高温学会志，Vol.16,
(Supplement), pp.332-340, (In Japanese).
7.
A.Ohmori， C.-J.
Li and Y.Arata, 1990, Influence of plasma spray conditions on the structure
of Al2O3 coatings, Trans. Jpn. Weld. Res. Inst.,
Vol.19, pp.259-270.
8.
A.Ohmori and C.-J. Li, 1991, Quantitative characterization of the structure of
plasma sprayed Al2O3 coating by using copper
electroplating, Thin Solid Films, Vol.201, pp.241-252.
9. 谷和美，原田良夫，李长久，1995,
WC-Co系溶射皮膜形成における粒子扁平化とその积层构造，日本金属学会志，Vol.59(No.11),
pp.1130-1135 (In Japanese).
10. C.-J. Li,
A.Ohmori and Y.Harada, 1996, Effect of powder structure on the structure of
thermally sprayed WC-Co coatings, Journal of Materials Science,
Vol.31, pp.785-794.
11. C.-J. Li,
A.Ohmori and Y.Harada, 1996, Formation of an amorphous phase in thermally
sprayed WC-Co, Journal of Thermal Spray Technology, Vol.5, pp.69-73.
12. C.-J. Li,
and A.Ohmori, 1996, The lamellar structure of a detonation gun sprayed Al2O3
coating, Surface and Coating Technology, Vol.82, pp.254-258.
13. C.-J. Li,
A.Ohmori and R.McPherson, 1997, The relationship between microstructure and
Young's modulus of thermally sprayed ceramic coatings, Journal of Materials Science,
Vol.32, pp.997-1004.
14. A.Ohmori,
K.Yoshida and C.-J. LI, 1997，Characterization
of graded Ti silicide coatings formed by thermal diffusion treatment of low
pressure plasma sprayed silicon coating on titanium substrate, Trans.
of Joining and Welding Research Institute, Vol.26 (No.2) pp.35-41.
15. 园家启嗣，李长久，纪岗昌，王豫跃，1998, 高速ガスフレ-ム溶射によるCr3C2-NiCr皮膜の物性に及ぼす溶射条件の影响，溶接学会論文集，Vol.16 (No.1), pp. 25-34.
16. A.Ohmori,
N.Ohnishi, C.-J. LI and H.Shoyama,
1998, Characterization of the structure of plasma-sprayed metallic silicide
coatings, Trans. of Joining and Welding Research Institute, Vol.27
(No.2), pp.47-52.
17. C.-J. Li,
K. Sonoya, G.-C. Ji and Y.-Y Wang, 1998, Effect of spray conditions on the
properties of HVOF Cr3C2-NiCr
coatings, Welding in the World, Vol.41 No.2, pp.77-87.
18. C.-J. Li,
A.Ohmori and K.Tani, 1999, Effect of WC particle size on the abrasive wear of
thermally sprayed WC-Co coatings, Materials and Manufacturing Processes,
Vol.14 (No.2), pp.175-184.
19. C.-J. Li,
H. Yang, H. Li, 1999, Effect of gaseous conditions on HVOF flame and property
of WC-Co coatings, Materials and Manufacturing Processes, Vol.14 (3), pp.383-395.
20. C.-J.
Li, K.Sonoya and F.-H.Li, 2000，Study of
influence of plasma spray conditions on the mechanical properties of Ni-50%Cr
coatings, by orthogonal experimental design, Welding In the World,
Vol.44, No.3, pp.22-28.
2001
21. K.
Sonoya, C.-J. Li and F.-H. Li, 2001, Study of relationships between microstructure
and mechanical properties of plasma-sprayed Ni-50Cr coatings and spray
parameters, Quarterly Journal of Japan Welding Society, Vol.19(1) 27-36 (In
Japanese)
22. C.-J. Li, Y.Y. Wang, T. Wu and G.C. Ji,
Effect of types of ceramic materials in aggregated powder on the adhesive
strength of HVOF cermet coating, Surface & Coating Technology,
Volume: 145, Issue: 1-3, August 1, 2001, pp. 113-120
2002
23. C.-J. Li and A. Ohmori, Relationship between the structure and properties of thermally
sprayed deposits, Journal of Thermal Spray Technology, Vol.11, No.3
(2002)365-374.
24. C.-J. Li and Y.-Y. Wang, Effect of particle state on the adhesive strength of HVOF
sprayed metallic coating, Journal of Thermal Spray Technology,
Vol.11(4)(2002)523-529.
25. C.-J. Li,
G.-C. Ji, Y.-Y. Wang and K. Sonoya, The dominant mechanism of carbon loss
during HVOF spraying of Cr3C2-NiCr, Thin
Solid Films, Vol.419 (2002)137-143.
2003
26. C.-J. Li,
W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surface & Coating Technology, Vol.167 No.2-3（2003）pp.278 –
283.
27. C.-J. Li,
W.-Y. Li, Effect of sprayed powder particle size on the oxidation behavior of
MCrAlY materials during HVOF deposition, Surface & Coating Technology,
V.162 (2003)21-41.
28. C.-J. Li,
G.-J. Yang and Z. Wang, Formation of nano-structured TiO2 by flame spraying
with liquid feedstock, Materials Letter, Vol.57(No.13-14),
2003, pp.2130-2134.
29. C.-J. Li,
T. Wu and C.-X. Li, Effect of particle trajectories on the thermal radiation
signal emitted by thermal spray particle for the simultaneous measurement of
particle parameters, Journal of Thermal Spray Technology,
Vol.12(1) ( 2003) 80-94.
30. C.-J. Li,
W.-Z. Wang and Y. He, Measurement of fracture toughness of plasma-sprayed Al2O3
coatings using a tapered double beam method, J. Amer. Ceram. Soc.,
2003, Vol.86 (8) 1437-39.
31. Keiji
Sonoya, Chang-Jiu Li and Gang-Chang
Ji, Relationship between the microstructure and properties of HVOF sprayed Cr3C2-NiCr coatings, Quarterly J. Japan Welding
Society, 2003, Vol.21(No.1), 2003, pp.109-115 (In Japanese).
32. Chang-Jiu Li,
Guan-Jun Yang and Akira Ohmori, Potential strengthening of erosion performance
of plasma-sprayed Al2O3 coating by adhesives
Impregnation, Journal of Materials Science Letters, Vol.22, 2003, 1499-1501.
2004
33. Guan-Jun
Yang, Chang-Jiu Li, Fen Han, and
Akira Ohmori, Microstructure and photocatalytic performance of HVOF sprayed TiO2 coatings, Thin Solid Films, 2004, Vol 466/1-2 pp 81-85.
34. Chang-Jiu
Li and Jing-long Li,
Evaporated-gas-induced splashing model for splat formation during plasma
spraying, Surface & Coatings
Technology, 2004, Vol 184/1 pp 13-23.
35. Chang-Jiu
Li, Cheng-Xin Li and Xian-Jin Ning, Performance of YSZ
Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet Supported
Tubular SOFC, Vacuum, 2004, Vol 73/3-4 pp 699-703
36. F.-X
Ye, A. Ohmori and C.-J. Li, New
approach to enhance the photocatalytic activity of plasma sprayed TiO2 coatings using p-n junctions, Surface & Coatings Technology, 2004, Vol 184/2-3 pp 233-238.
37. Chang-Jiu Li,
Wei-Ze Wang, Quantitative characterization of lamellar microstructure of
plasma-sprayed ceramic
coatings through visualization of Voids
Distribution, Materials Science and Engineering A, 2004, Vol 386/1-2 pp 10-19
38. LI Chang-Jiu,
LI Wen-ya, Microstructure evolution of cold-sprayed coating during deposition
and through post-spraying heat treatment, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14,special 2
(special issues for the International Conference on Surface Engineering, 2004),
(2004)49-54.
39. LI
Wen-ya, LI Chang-Jiu, Optimization
of spray conditions in cold spraying based on the numerical analysis of
particle velocity, Trans. Nonferrous
Met. Soc. China, 2004, Vol. 14, special 2 (special issues for the
International Conference on Surface Engineering, 2004), (2004)43-48.
40. C.-J. Li,
W.-Z. Wang and Y. He, Dependency of fracture toughness of plasma-spray Al2O3
coatings on lamellar structure, J. Thermal Spray Technol., 2004,
Vol.13(3)425-431
41. Chang-Jiu Li,
Yu-Yue Wang, Guan-Jun Yang, Akira Ohmori, K.A. Khor, Effect of solid carbide
particle size on deposition behavior, microstructure and wear performance of
HVOF cermet coatings, Materials Science and Technology,
2004. 20 (9): 1087-1096 SEP 2004
42. Chang-Jiu Li and Bo Sun, Microstructure and Property of Micro-Plasma-Sprayed Cu Coating, Materials
Science and Engineering A, 2004, Vol 379/1-2 pp 92-101
43. C.-J. Li and J.-L. Li; Transient contact pressure during flattening of thermal spray
droplet and its effect on splat formation; Journal of Thermal Spray Technology,
Vol.13(No.2) (2004) 229-238.
44. Chang-Jiu
Li and Bo
Sun, Effects of spray parameters on the
microstructure and property of Al2O3 coatings sprayed by
a low power plasma torch with a novel hollow cathode, Thin Solid Films, 2004, 450/2 pp. 282-289
45. Wei-Ze
Wang, Chang-Jiu Li and Fu-Xing Ye,
Effect of specimen geometry on fracture toughness measurement of plasma-sprayed
ceramic coatings by the tapered cantilever beam approach, Vacuum, 2004, Vol.73/3-4
pp 649-654
46. Guan-Jun
Yang, Chang-Jiu Li, Feng Han and
Xin-Chun Huang, Effects of annealing treatment on microstructure and
photo-catalytic performance of nanostructured TiO2 Coatings
flame-sprayed with liquid feedstocks, J. Vaccum Sci. & Technol. B, 22(5)(2004)2364-2368
47. WANG
Yu-yue, LI Chang-Jiu, MA Jian, YANG
Guan-jun, Effect of flame conditions on the abrasive wear performance of HVOF
sprayed nanostructured WC-12Co coatings, Trans.
Nonferrous Met. Soc. China, 2004, Vol. 14, special 2 (special issues
for the International Conference on Surface Engineering, 2004), (2004)72-76.
48. Chang-Jiu Li and Bo Sun, Microstructure and Property of Al2O3 coating micro-plasma sprayed
using a novel hollow cathode torch, Materials Letters, 2004，Vol
58/1-2 pp 179-183.
49. Chang-Jiu Li,
Yu-Yue Wang, Hua Li, Effect of nano-crystallization of HVOF-sprayed NiCrBSi
alloy on properties of coatings, J. Vaccum Sci. & Technol. A, 22(5)(2004)2000-2004.
50. Fuxing Ye, A Ohmori, Chang-Jiu
Li， Formation of p-n junction by
plasma spraying technique to enhance the photocatalytic activity of TiO2，Journal of Materials Science, Vol.39(2004) 353-355
51. YANG
Guan-jun, LI Chang-Jiu, WANG Yu-yue,
Effect of substrate materials on the rutile crystalline orientation in
plasma-sprayed TiO2 coatings, Trans.
Nonferrous Met. Soc. China, 2004, Vol. 14, special 2 (special issues
for the International Conference on Surface Engineering, 2004), (2004)62-66.
2005
52. Chang-Jiu Li,
Wen-Ya Li, Yu-Yue Wang, Formation of metastable phases in cold-sprayed soft
metallic deposit, Surface and Coatings Technology, Vol.198(2005)469-473.
53. Chang-Jiu
Li, Xian-Jin Ning and Cheng-Xin Li, Effect of Densification Process on the Properties of
Plasma-Sprayed YSZ Electrolyte coatings for Solid Oxide Fuel Cell, Surface
and Coatings Technology, Vol.190(2005)60-64
54. Chang-Jiu Li,
Han-Lin Liao. P. Gougen, G. Montovon, C. Coddet, Experimental determination of
the relationship between flattening degree and Reynolds number for spray molten
droplets, Surface & Coatings Technology, 2005, Vol 191/2-3 pp 375-383
55. Chang-Jiu Li,
Wen-Ya Li, Yu-Yue Wang, Guan-Jun Yang, H. Fukanuma, A theoretical model for
prediction of deposition efficiency in cold spraying, Thin Solid Films,
Vol.489(2005) 79-85.
56. Y.-Y.
Wang, C.-J. Li, Effect of substrate surface
conditions on the bonding mechanism of HVOF coatings, Thin Solid Films,
Vol.485(2005)141-147.
57. Chang-Jiu Li, Cheng-Xin Li, Min Wang, Effect of Spray Parameters on the
Electrical Conductivity of Plasma-Sprayed La1-xSrxMnO3 coating for the cathode of SOFCs, Surface and Coatings Technology,
Vol.198(2005)278-282
58. Guan-Jun
Yang, Chang-Jiu Li, Yu-Yue Wang,
Phase Formation of Nano-TiO2 Particles during Flame Spraying with Liquid
Feedstock, Journal of Thermal Spray Technology, Vol.14 (4) (2005)480-486.
59. Wenya
Li, Chang-Jiu Li, Optimal design of
a novel cold spray gun nozzle at a limited space, Journal of Thermal Spray
Technology, Vol.14(3), 2005, 391-396.
60. Fu-Xing
Ye, A. Ohmori, C.-J. Li,
Photoresponse and donor concentration of plasma sprayed TiO2 and TiO2-ZnO electrodes, Journal
of Thermal Spray Technology，Vol.14
(4) (2005)530-535.
2006
61. Yu-Yue
Wang，Chang-Jiu Li,
Akira Ohmori, Examination of factors controlling bonding strength of HVOF
sprayed coatings, Surface & Coatings Technology, Vol.200(2006)2923-2928.
62. Keiji
Sonoya, Chang-Jiu Li, Wei-Ze Wang,
Fracture toughness of plasma sprayed YSZ coatings, Quarterly Journal of Japan
Welding Society, Vol.24 (2006) 65-69. (in Japanese)
63. Chang-Jiu Li,
Guan-Jun Yang; Akira Ohmori, Relationship between particle erosion and lamellar
microstructure for plasma sprayed alumina coatings, Wear, 260(2006)1166-1172.
64.
Wen-Ya Li, Chang-Jiu
Li, Effect of annealing treatment on the microstructure and properties of
cold-sprayed Cu coating, Journal of
Thermal Spray Technology, Vol.15(2) (2006)206-211. (SCI 收录，EI收录)
65. Chang-Jiu
Li, Wen-Ya Li, Examination of
the critical velocity for deposition of particles in cold spraying, Journal of Thermal Spray Technology,
Vol.15(2) (2006)212-222. (SCI 收录，EI收录).
66.
Xian-Jin Ning,
Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of powder structure on
microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating, Vacuum 80 (2006) 1261–1265
67.
H. Li, S.
Costil, H.-L. Liao, C.-J. Li, M. Planche, C. Coddet, Effects of surface
conditions on the flattening behavior of plasma sprayed Cu splat, Surface Coating Technology, 200
(2006) 5435 – 5446
68.
Gang-Chang Ji, Chang-Jiu Li, Yu-Yue Wang，Microstructural characterization and
Abrasive wear performance of HVOF sprayed Cr3C2-NiCr coating, Surface & Coatings Technology 200 (2006) 6749–6757.
69. Wei-Ze
Wang, Chang-Jiu Li, Yu-Yue Wang,
Guan-Jun Yang, K. Sonoya, Elastic Behavior of Plasma-Sprayed Ni-Cr coatings, Surface
& Coatings Technology,
201(2006) 842-847
70. Xian-jin Ning, Chang-Jiu
Li, Cheng-xin Li, Modification of microstructure and electrical
conductivity of plasma-sprayed YSZ deposit through post-infiltration process, Materials
Science and Engineering A 428 (2006) 98–105.
71. Chang-Jiu Li,
Guan-Jun Yang, Yu-Yue Wang, Cheng-Xin Li, Phase formation during deposition of
TiO2 coatings through high velocity oxy-fuel spraying, Mater. Trans. Vol.47 (7) (2006)
1690-1696
72. Cheng-Xin Li, Chang-Jiu
Li, Min Gao, Wei Zhou, Guan-jun Yang, Yu-yue Wang, Characterization
of the microstructure and electrical conductivity of plasma-sprayed La0.5Sr0.5CoO3 coating, Mater. Trans., Vol.47 (7)
(2006) 1654-1657
73. Sheng-Qiang Fan, Chang-Jiu
Li, Cheng-Xin Li, Guang-Jian Liu, Guan-Jun Yang，Ling-Zi Zhang, Preliminary study of Performance of
Dye-sensitized Solar Cell of nano-TiO2 Coating Deposited by Vacuum Cold Spraying, Mater. Trans., Vol.47 (7) (2006)
1703-1709
74. Wei-Ze
Wang, Chang-Jiu Li, Yu-Yue Wang,
Effect of spray distance on the mechanical properties of plasma sprayed Ni-Cr
coatings, Mater. Trans., Vol.47 (7)
(2006) 1643-1648.
75.
Y.-Y. Wang, C.-J. Li, K. Kusumoto, G.-J. Yang,
Deposition Behaviors of Solid Phase in Liquid-Solid Two-Phase Particles in High
Velocity Oxy-Fuel Spraying, Mater. Trans.，Vol.47 (7) (2006) 1684-1689
76.
Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ya-Zhe
Xing, Xin-Jin Ning, Chao Zhang, Han-Lin Liao, C. Coddet, Characterization of
Atmospheric Plasma-Sprayed Sc2O3-ZrO2 electrolyte coating, Solid State Ionics, 177 (2006) 2149–2153
77. Chang-Jiu Li,
Cheng-Xin Li, Ya-Zhe Xing, Min Gao, Guan-Jun Yang, Effect of YSZ electrolyte
thickness on the characteristics of plasma-sprayed cermet supported tubular
SOFC, Solid State Ionics, 177 (2006)
2065–2069
78. Wen-Ya
Li, Hanlin Liao, Hong-Tao Wang, Chang-Jiu
Li, Ga Zhang, C. Coddet, Optimal design of a convergent-barrel cold spray
nozzle by numerical method, Applied Surface Science, 2006,
253(2006) 708-713.
79.
Wen-Ya
Li, Hanlin Liao, Chang-Jiu Li, Gang
Li, Christian Coddet, Xiaofang Wang, On high velocity impact of micro-sized
metallic particles, Applied Surface Science, 253(2006) 2852-2862.
80. Chang-Jiu Li,
Cheng-Xin Li, Ya-Zhe Xing, Ying-Xin Xie, Hui-Guo Long, Influence of the
characteristics of stabilized zirconia electrolyte on the performance of cermet
supported tubular SOFCs, Rare Metals,
Vol. 25 (2006) 273-279.(special issue)
81. Sheng-Qiang
Fan, Chang-Jiu Li, Guan-Jun Yang,
Ling-Zi Zhang, Influence of TiCl4 Treatment on
Performance of Dye-sensitized Solar Cell Assembled with Nano-TiO2 Coating
Deposited by Vacuum Cold Spraying, Rare Metals, Vol. 25 (2006) 163-168
(special issue)
82. Chang-Jiu Li,
Cheng-Xin Li, Guan-Jun Yang, Yu-Yue Wang, Examination of Substrate Surface
Melting-Induced Splashing during Splat Formation in Plasma Spraying, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 717-724
83.
Sheng-Qiang, Fan, Guan-Jun Yang,
Guang-Jian Liu, Cheng-Xin Li, Chang-Jiu
Li, Ling-Zi Zhang, Characterization of Microstructure of TiO2 Coating
Deposited by Vacuum Cold Spraying, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 513-517.
84. Wen-Ya
Li, Hee-Seon Bang, Chang-Jiu Li, Hong-Tao Wang, Cheng-Xin
Li, Measurement and numerical simulation of particle velocity in cold spraying, Journal of Thermal Spray Technology, Vol.15(No.4), 2006, 559-562.
85. Guan-Jun
Yang, Chang-Jiu Li, Cheng-Xin Li,
Yu-Yue Wang, Xin-Chun Huang, Effect of Cu+2 ion doping on photocatalytic
performance of liquid flame sprayed TiO2 coatings, Journal of Thermal Spray Technology, Vol.15(No.4), 2006,
582-586
86.
C. Zhang, H. Liao, C.-J. Li, W.-Y. Li, G. Zhang, C.-X. Li,
X.-J. Ning, C. Coddet, Characterization of YSZ Solid Oxide Fuel Cells
Electrolyte Deposit by Atmospheric Plasma Spraying and Low Pressure Plasma
Spraying, Journal of Thermal Spray
Technology, Vol.15 (No.4), 2006, 598-603.
2007
87.
W.-Y.
Li, C. Zhang, H.-T. Wang, X.P. Guo, H.L. Liao, C.-J. Li, C. Coddet, Significant
influences of metal reactivity and oxide films at particle surfaces on coating
microstructure in cold spraying, Applied Surface Science, Vol.253(7)
(2007) 3557-3562
88.
Wen-Ya Li, Chao
Zhang, Xueping Guo, Jinlin, Xu, Chang-Jiu
Li, Hanlin Liao, Chritian Coddet, Khiam Aik Khor, Ti and Ti-6Al-4V coatings
by cold spraying and microstructure modifications by heat treatment, Advance
Engineering Materials, 2007, Vol.9 (5)
(2007): 418-423
89. Chao
Zhang, Chang-Jiu Li, Ga Zhang, Xian-Jin Ning, Cheng-Xin Li, Hanlin
Liao, Christain Coddet, Ionic conductivity and its temperature dependence of
atmospheric plasma sprayed yttria stabilized zirconia electrolyte, Materials
Science and Engineering B, Vol.137 (1-3), 2007, pp.24-30
90.
Wen-Ya
Li, Hanlin Liao, Chang-Jiu Li,
Hee-Seon Bang, Christian Coddet, Numerical simulation of deformation behavior
of Al particles impacting on Al substrate and effect of surface oxide films on
interfacial bonding in cold spraying, Applied Surface Science, Vol.253 (11) (2007): 5084-5091
91.
Wen-Ya
Li, Chang-Jiu Li, Hanlin Liao,
Christian Coddet, Effect of heat treatment on the microstructure and
microhardness of cold-sprayed tin bronze coating, Applied Surface Science, Vol.253 (14) (2007): 5967-5971
92.
Guan-Jun
Yang, Chang-Jiu Li, Yu-Yue Wang,
Cheng-Xin Li, Dominant microstructural feature over photocatalytic activity of
high velocity oxy-fuel sprayed TiO2 coating, Surface & Coatings Technology, Vol.202, (2007) 63-68
93.
Sheng-Qiang
Fan, Chang-Jiu Li, Guan-Jun Yang,
Ling-Zi Zhang, Jin-Cheng Gao, and Ying-Xin Xi, Fabrication of Nano-TiO2 Coating
for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature, Journal
of Thermal Spray Technology, Vol.16, No.5-6, 2007, 893-897
94.
Guan-Jun
Yang, Chang-Jiu Li, Sheng-Qiang Fan,
Yu-Yue Wang, Cheng-Xin Li, Influence of Annealing on Photocatalytic Performance
and Adhesion of Vacuum Cold-Sprayed
Nanostructured TiO2 Coating, Journal
of Thermal Spray Technology, Vol.16, No.5-6, 2007, 873-880
95.
Chao
Zhang, Wen-Ya Li, Hanlin Liao, Chang-Jiu
Li, Cheng-Xin Li, Christian Coddet, Microstructure and Electrical
Conductivity of Atmospheric Plasma-Sprayed LSM/YSZ Composite Cathode Materials, Journal of Thermal Spray Technology,
Vol.16 (5-6) (2007), p.1005-1010
96.
Guan-Jun
Yang, Chang-Jiu Li, Xin-Chun Huang, Cheng-Xin
Li, Yu-Yue Wang, Influence of Silver Doping on Photocatalytic
Activity of Liquid-Flame- Sprayed- Nanostructured TiO2 Coating, Journal of Thermal Spray Technology,
Vol.16, No.5-6, 2007, 881-885.
97. Chang-Jiu Li, Guan-Jun Yang, Pei-Hu Gao, Jian Ma, Yu-Yue
Wang, Cheng-Xin Li, Characterization of Nanostructured WC-Co Deposited by Cold
Spraying, Journal of Thermal Spray
Technology, Vol.16, No.5-6, 2007, 1011-1020
98.
Gang-Chang
Ji, Chang-Jiu Li, Yu-Yue Wang, Wen-Ya
Li, Erosion Performance of HVOF-Sprayed Cr3C2-NiCr Coatings, Journal of Thermal Spray Technology,
Vol.16, No.4, 2007，557-565
99.
Hong-Tao
Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin
Li, Qiang Zhang, Wen-Ya Li, Microstructural Characterization of Cold-Sprayed
Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled
Feedstock Powders, Journal of Thermal
Spray Technology, Vol.16, No.5-6, 2007, pp.669-676
100. F.-X. Ye, A. Ohmori, T. Tsumura, K. Nakata,
and C.-J. Li, Microstructural
Analysis and Photocatalytic Activity of Plasma-Sprayed Titania-Hydroxyapatite
Coatings, Journal of Thermal Spray
Technology, Vol.16, No.5-6, 2007, 776-782
101. Wen-Ya, Li, Chao Zhang, Xueping Guo, Chang-Jiu Li, Hanlin Liao, C. Coddet,
Study on impact fusion at particle interfaces and its effect on coating
microstructure in cold spraying, APPLIED
SURFACE SCIENCE 254 (2): 517-526 SEP 15 2007
2008
102. W.-Y. Li, C. Zhang, X.P. Guo, G. Zhang, H.L.
Liao, C.-J. Li, C. Coddet, Effect of
standoff distance on coating deposition characteristics in cold spraying”, Materials
& Design, 29(2008)297-304
103. Hong-Tao Wang, Chang-Jiu
Li, Guan-Jun Yang, Cheng-Xing Li, Effect of heat treatment on the
microstructure and property of cold-sprayed nanostructured FeAl/Al2O3
intermetallic composite coating, Vacuum, Volume: 83, Issue: 1, 2008, P.146-152
104. Cheng-Xin Li, Ying-Xin Xie, Chang-Jiu Li, Guan-Jun Yang, Characterization of
atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte, Journal of Power Sources, Vol.184, Issue: 2, 2008, P.370-374
105. Ya-Zhe Xing, Chang-Jiu
Li, Cheng-Xin Li, Guan-Jun Yang, Influence of Through-Lamella Grain Growth
on Ionic Conductivity of Plasma-Sprayed Yttria Stabilized Zirconia as an
Electrolyte in Solid Oxide Fuel Cells, J. Power
Sources, 2008, Vol.176, 2008, pp.31-38.
106. Ya-Zhe Xing, Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ying-Xin Xie, Microstructure
Development of Plasma Sprayed Yttria-Stabilized Zirconia and its Effect on
Electrical Conductivity, Solid State
Ionics, Solid State Ionics, Volume: 179, Issue: 27-32, 2008, P.1483-1485
107. Chang-Jiu Li, Cheng-Xin Li, Hui-Guo Long, Ya-Zhe Xing, Guan-Jun Yang,
Performance of tubular solid oxide fuel cell assembled with plasma-sprayed
Sc2O3-ZrO2 electrolyte, Solid State
Ionics, Volume: 179, Issue: 27-32, 2008, P.1575-1578
108. Chao Zhang, Ga Zhang, Susanne Leparoux, Hanlin Liao,
Cheng-Xin Li, Chang-Jiu Li,
Christian Codde, Microwave sintering of plasma-sprayed yttria stabilized
zirconia electrolyte coating, Journal of the European Ceramic Society, Volume: 28, Issue: 13, 2008, P.2529-2538
109. Chao Zhang, Wen-Ya Li, Marie-Pierre Planche, Cheng-Xin
Li, Hanlin Liao, Chang-Jiu Li,
Christian Coddet, Study on gas permeation behaviour through atmospheric
plasma-sprayed yttria stabilized zirconia coating, Surface & Coatings Technology, Volume: 202, Issue: 20, 2008, P.5055-5061
110. Q. Zhang, C.-J Li,
C.-X. Li, G.-J. Yang, H.-T. Wang, S.-C. Lui, Study of oxidation behavior of
cold-sprayed nanostructured NiCrAlY bond coatings, Surface & Coatings Technology, Volume: 202, Issue: 14, 2008, P.3378-3384. (IDS Number: 286TA)
111. Chao Zhang, Chang-Jiu
Li, Hanlin Liao, Marie-Pierre Planche, Cheng-Xin Li, Christain Coddet,
Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ
electrolyte coating for solid oxide fuel cells, Surface & Coatings Technology, Volume: 202, Issue: 12, 2008,
P.2654-2660
112. Xian-Jin Ning, Jae-Hoon Jang, Hyung-Jun Kim, Chang-Jiu Li, Changhee Lee, Cold
spraying of Al-Snbinary alloy: Coating characteristics and particle bonding
features, Surface & Coatings
Technology, Volume: 202, Issue: 9, 2008, P.1681-1687
113. Ya-Zhe Xing, Yong Li, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Influence of substrate
temperature on microcracks formation in plasma-sprayed yttria-stabilized
zirconia splats, Key Engineering
Materials, Volume: 373-374, 2008, P.69-72
114. Yang, Guan-Jun, Li, Chang-Jiu,
Han, Feng, Li, Wen-Ya, Ohmori, Akira, Low temperature deposition and
characterization of TiO2 photocatalytic film through cold spray, Applied Surface Science, Vol.54(13), 2008, P.3979-3982.
115. Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xing Li, Cold spraying of Fe/Al
powder mixture: Coating characteristics and influence of heat treatment on the
phase structure, Applied Surface Science,
Vol.255(5), 2008, P.2538-2544
116. W.-Y. Li , C. Zhang, X.P. Guo, G. Zhang, H.L.
Liao, C.-J. Li, C. Coddet, Effect of
standoff distance on coating deposition characteristics in cold spraying, Materials & Design, Vol.29(2),
2008, P.297-304
117. Y.Z. Xing, C.J. Li, Q. Zhang, C.X. Li, G.J. Yang, Influence of Microstructure
on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia
Deposits, Journal of the American
Ceramic Society, Vol.91 (12), 2008, 3931-3936
118. Fukumoto M, Hwang S.Y., Li C.J., Khor M.A.,
The current status of thermal spraying in Asia, Journal of Thermal Spray Technology, Vol17(1), 2008, P.5-13
119. G.J. Yang, C.J. Li, S.J. Zhang, C.X. Li, High-Temperature Erosion of HVOF
Sprayed Cr3C2-NiCr
Coating and Mild Steel for Boiler Tubes, Journal
of Thermal Spray Technology, Vol.17(5-6), 2008, P.782-787
120. P.-H. Gao, Y.-G. Li, C.-J. Li, G.-J. Yang, C.-X. Li, Influence of Powder Porous
Structure on the Deposition Behavior of Cold-Sprayed WC-12Co Coatings, Journal of Thermal Spray Technology,
Vol.17(5-6), 2008, P.742-749
121. Q. Zhang, C.J. Li, X.R. Wang, Z.L. Ren, C.X. Li, G.J. Yang, Formation of NiAl
Intermetallic Compound by Cold Spraying of Ball-Milled Ni/Al Alloy Powder
Through Postannealing Treatment, Journal
of Thermal Spray Technology, Vol.17(5-6), 2008, P.715-720
122. Q. Zhang, CJ Li, Y Li, SL Zhang, XR Wang, GJ Yang, CX Li, Thermal Failure of
Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured
NiCrAlY Bond Coat, Journal of Thermal
Spray Technology, Vol.17(5-6), 2008, P.838-845
123. Gao PH, Li CJ, Yang GJ, Li YG, Li CX, Influence of substrate hardness on deposition
behavior of single porous WC-12Co particle in cold spraying, Surface & Coatings Technology,
203(3-4), 2008: 384-390
124. G.-J. Yang, C.-J. Li, Y.-Y. Wang, C.-X. Li, Origin of preferential orientation
of rutile phase in thermally sprayed TiO2 coatings, Materials Letters, 62(10-11)(2008) 1670-1672
125. Hong-Tao Wang, Guan-Jun Yang, Chang-Jiu Li*, Cheng-Xing Li, Effect of
annealing treatment on the structure and microhardness of cold-sprayed
nanostructured FeAl/WC composite coating, Key
Engineering Materials, Volume: 373-374, 2008, P.73-76
126. A.F. Zhang, Y.Y.Wang, C.-J.Li, Effects of erosion rate on the erosion-corrosion synergism
of high velocity oxy-fuel sprayed Ni-based coatings, Key Engineering Materials, Volume: 373-374, 2008, P.585-588
127. Min Gao, Cheng-Xin Li, Ming-De Wang, Hua-Lei
Wang, Chang-Jiu Li, Influence of the
surface roughness of plasma-sprayed YSZ on LSM cathode polarization in solid
oxide fuel cells, Key Engineering
Materials, Volume: 373-374, 2008, P.641-644
128. Sheng-Qiang Fan, Chang-Jiu Li, Guan-Jun Yang, Jin-Cheng Gao, Ling-Zi Zhang,
Cheng-Xin Li, Yu-Yue Wang, Room-temperature deposition of nano-TiO2 coating by Vacuum
cold spraying using TiCl4-agglomerated nano-TiO2 powder for flexible
dye-sensitized solar cell, Key Engineering
Materials, Volume: 373-374, 2008, P.742-745
2009
129. Min Gao, LI
Chang-Jiu, Li Cheng-Xin, Yang Guan-Jun, Fan, Sheng-Qiang, Microstructure,
oxygen stoichiometry and electrical conductivity of flame-sprayed Sm0.7Sr0.3CoO3-delta,
J. Power Sources, 2009, 191 (2): 275-279
130. Li Cheng-Xin, LI
Chang-Jiu, Yang Guan-Jun, Development of a Ni/Al2O3 Cermet-Supported
Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by
Atmospheric Plasma-Spraying, J. Thermal Spray Techn., 2009, 18 (1), 83-89
131. Chao Zhang, Abdoul-Fatah Kanta, Cheng-Xin Li, Chang-Jiu Li, Marie-Pierre Planche,
Hanlin Liao, Christain Coddet, Effect of in-flight particle characteristics on
the coating properties of atmospheric plasma-sprayed 8 mol% Y2O3-ZrO2
electrolyte coating studying by artificial neural networks, Surface & Coatings Techn, 2009,
204, 463–469, doi:10.1016/j.surfcoat.2009.08.009
132. Wen-Ya Li, Chao Zhang, Chang-Jiu Li, Hanlin Liao, Modeling aspects of high velocity impact
of particles in cold spraying by explicit finite element analysis, J. Thermal Spray Techn., 18(5-6), 921-933,
doi: 10.1007/s11666-009-9325-2
2010
133. Cheng-Xin Li, Chang-Jiu Li, Lie-Jin Guo, Effect of
composition of NiO/YSZ anode on the polarization characteristics of SOFC
fabricated by atmospheric plasma spraying, International Journal of Hydrogen Energy, V.35, 2010, pp.2964-2969
(doi:10.1016/j.ijhydene.2009.05.041).
134. Xiao-Ming Wang,
Cheng-Xin Li, Chang-Jiu Li, Guan-Jun
Yang, Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3
deposited by suspension plasma spraying, International Journal of Hydrogen Energy, V.35, 2010, pp.3152-3158, (
doi:10.1016/j.ijhydene.2009.11.023)
135. Cheng-Xin Li, Chang-Jiu
Li, Lie-Jin Guo, Performance of a Ni/Al2O3 cermet-supported tubular solid
oxide fuel cell operating with biomass-based syngas through supercritical
water, International Journal of Hydrogen
Energy, 35(2010)2904-2908( doi:10.1016/j.ijhydene.2009.05.033)
136. Yong Zhou, Chang-Jiu Li, Guan-Jun Yang, Hong-Duo
Wang, Geng Li, Effect of self-propagating high temperature combustion synthesis
on the deposition of NiTi coating by cold spraying using mechanical alloying
Ni/Ti powder, Intermetallics, V.18,
2010, pp.2154-2158.
137. Yong Li, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin
Li, Relation between microstructure and thermal conductivity of plasma-sprayed
8YSZ coating, International Journal of
Modern Physics B, V.24(15-16), 2010, pp.3017-3022.
138. Qiang Zhang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin
Li, Effect of powder structure on microstructure of the oxide scales formed on
cold-sprayed NiCrAlY coatings, International
Journal of Modern Physics B, V.24(15-16), 2010, pp.3041-3046.
139. Chang-Jiu Li, Xin-Kun Suo, Guan-Jun
Yang, Cheng-Xin Li, Influence of annealing on the microstructure and wear
performance of diamond/NiCrAl composite coating deposited through cold
spraying, Materials Science Forum, Vols. 638-642, 2010, pp.894-899,
doi:10.4028/www.scientific.net /MSF.638-642.894
140. Wen-Ya Li, Chang-Jiu Li, Characterization of
cold-sprayed nanostructured Fe-based alloy, Applied Surface Science, V.256, 2010, pp.2193-2198,
doi:10.1016/j.apsusc.2009.09.072
141. Pei-Hu Gao, Chang-Jiu Li, Guan-Jun Yang, Yi-Gong
Li, Cheng-Xin Li, Influence of substrate hardness transition on built-up of
nanostructured WC-12Co by cold spraying, Applied
Surface Science, V.256, 2010, pp.2163-2168, doi:
10.1016/j.apsusc.2009.10.050
142. X.-M. Wang, C.-J. Li, C.-X. Li, G.-J. Yang, Microstructure and Electrochemical Behavior
of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying
for Solid Oxide Fuel Cell Application, Journal of Thermal Spray Technology, Vol.19(1-2), 2010, p.311-316,
doi:10.1007/s11666-009-9373-7
143. Y. Li, C.-J. Li, Q. Zhang, G.-J. Yang, C.-X.
Li, Influence of TGO Composition on the
Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-sprayed MCrAlY
Bond Coat, Journal of Thermal
Spray Technology, Vol.19(1-2), 2010, p.168-177,
doi:10.1007/s11666-009-9372-8.
144. C.-J. Li, H.-T. Wang, Q. Zhang, G.-J.
Yang, W.-Y. Li, and H.L. Liao, Influence
of Spray Materials and Their Surface Oxidation on the Critical Velocity in Cold
Spraying, Journal of Thermal Spray Technology, Vol.19(1-2), 2010,
p.95-101, doi:10.1007/s11666-009-9427-x
145. P.F. Zhao, C.A. Sun, X.Y. Zhu, F.L. Shang, C.J. Li, Fracture toughness
measurements of plasma-sprayed thermal barrier coatings using a modified
four-point bending method, Surface &
Coatings Technology, 204 (2010), 4066–4074
146. Wen-Ya Li, Chang-Jiu
Li, Guan-Jun Yang, Effect of impact-induced melting on interface
microstructure and bonding of cold-sprayed zinc coating, Applied Surface
Science, V.257(5), 2010,
pp.1516-1523.
147.
Yong Li, Chang-Jiu Li, Guan-Jun Yang, Lu-Kuo
Xing, Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond
coats by cold spraying and low-pressure plasma spraying, Surface & Coatings Technology, 205 (2010) 2225–2233
2011
148. C.-J. Li, H.-T. Wang, G.-J. Yang, C.-G.
Bao, Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl
Intermetallic Compound Coating, Journal
of Thermal Spray Technology, Vol.20, 2011, pp.227-231
149. S. Hao, C.-J. Li, G.-J. Yang, Influence of
Deposition Temperature on the Microstructures and Properties of Plasma-sprayed
Al2O3 Coatings, J. Thermal
Spray Tech., Vol.20, 2011, pp.160-169
150. Y. Li, C.-J. Li, Q. Zhang, L.-K. Xing, G.-J.
Yang, Effect of Chemical Compositions and Surface Morphologies of MCrAlY
Coating on its Isothermal Oxidation Behavior, J. Thermal Spray Tech., Vol.20, 2011, pp.121-131.
151. Y.-Y. Wang, Y. Liu, C.-J. Li, G.-J. Yang, J.-J. Feng, and K. Kusumoto, Investigation on
the Electrical Properties of Vacuum Cold Sprayed SiC-MoSi2 Coatings at Elevated Temperatures, Journal of Thermal Spray Technology,
Volume 20(4) , 2011, 892-897
152. Guan-Jun
Yang, Chang-Jiu Li, Sheng-Qiang Fan,
Jin-Cheng Gao, Influence of pore structure on ion diffusion property in porous
TiO2 coating and photovoltaic performance of dye-sensitized solar
cells, Surface and Coatings Technology,
2011, Vol.205(10), pp.3205-3210. DOI:
10.1016/j.surfcoat.2010.11.042
153. Guan-Jun Yang, Chang-Jiu Li, Kai-Xing Liao, Xue-Long He, Shan Li, Sheng-Qiang Fan,
Influence of gas flow during Vacuum cold spraying of nano-porous TiO2 film by using strengthened
nanostructured powder on performance of dye-sensitized solar cell, Thin Solid Films, 2011, Vol.519,
4709-4713, (http://dx.doi.org/10.1016/j.tsf.2011.01.021)
154. Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Multiple strengthening
mechanisms of cold-sprayed cBNp/NiCrAl composite coating, Surface and Coatings Technology, V.205, 2011, P.4808-4813,
doi:10.1016/j.surfcoat.2011.04.065
155. Sheng-Qiang Fan, Chuleoo Kim, Baizeng Fang,
Kai-Xing Liao, Guan-Jun Yang, Chang-Jiu
Li, Jeum-Jong Kim, Jaejung Ko, Improved efficiency of over 10% in
dye-sensitized solar cells with a Ruthenium complex and an organic dye
heterogeneously positioning on a single TiO2 electrode, Journal of Physical Chemistry C, Vol.115(15), 2011, pp. 7747-7754. DOI: 10.1021/jp200700e
156. Guan-Jun
Yang, Hong-Tao Wang, Chang-Jiu Li,
Cheng-Xin Li, Effect of annealing on the microstructure and erosion performance
of cold-sprayed FeAl intermetallic coatings, Surface and Coatings Technology, 205 (2011) 5502-5509.
157.
Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Katsuyoshi Kondoh, High
strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite
through high velocity impact, Scripta
Materialia, 65 (2011), 581-584.
158. P.F.
Zhao, X.D. L, F.L. Shang, C.J. Li,
Interlamellar cracking of thermal barrier coatings with TGOs by non-standard
four-point bending tests, Materials
Science and Engineering A, A528 (2011), 7641-7647
159. Changjiu Li, Yong
Li, Lukuo Xing, Guanjun Yang, Chengxin Li, Microstructure Features of
Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior, Materials Science Forum, Vol.686, 2011,
p.595-602. DOI: 10.4028/www.scientific.net/MSF.686.595
160. Xue-Long
He, Mei Liu, Guan-Jun Yang, Sheng-Qiang Fan, Chang-Jiu Li,
Correlation between microstructure and electrocatalytic property of electroless
deposited Pt counter electrodes on plastic substrate and photovoltaic
performance of dye-sensitized solar cells, Applied
Surface Science, 258 (2011) 1377-1384, 2011, doi:10.1016/j.apsusc.2011.09.070
161. Guan-Jun
Yang, Sheng-Qiang Fan, Chang-Jiu Li,
Cheng-Xin Li, Layer-by-layer fabrication of multiple-dye-sensitized TiO2 films for dye-sensitized solar cells by Vacuum cold spray, Nanoscience and Nanotechnology Letters (NNL), Vol.3(No.4), 2011, 483-486
162. Xiao-Ming
Wang, Chang-Jiu Li, Cheng-Xin,
Li-Hui Tian, Guan-Jun Yang, Microstructure and electrochemical behavior of La0.8Sr0.2MnO3 deposited by solution precursor plasma spraying, Rare Metal Materials and Engineering, Vol.40(11), 2011, pp.1881-1886
2012
163. Xiao-Tao
Luo, Guan-Jun Yang, Chang-Jiu Li,
Preparation of cBNp/NiCrAl Nanostructured Composite Powders by a Step-Fashion
Mechanical Alloying Process, Powder Technology,
217 (2012) 591-598
164. Xiao-Tao
Luo and Chang-Jiu Li, Thermal
Stability of Microstructure and Hardness of Cold-Sprayed cBN/NiCrAl
Nanocomposite Coating, Journal of
Thermal Spray Technology, 2012, Vol.21, 578-585 DOI:
10.1007/s11666-011-9719-9
165. Guan-Jun
Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu
Li, Simultaneous strengthening and toughening effects in WC-(nanoWC-Co), Scripta Materialia, 2012, Vol.66,
777-780.
166. Guan-Jun
Yang, Kai-Xing Liao, Chang-Jiu Li,
Sheng-Qiang Fan, Cheng-Xin Li, Shan Li,
Formation of pore structure and its influence on the mass transport
property of Vacuum cold sprayed TiO2 coatings using strengthened
nanostructured powder, Journal of
Thermal Spray Technology, 2012, Vol.21, 505-513
167. Guan-Jun
Yang, Xu-Dong Xiang, Lu-Kuo Xing, Ding-Jun Li, Chang-Jiu Li, Cheng-Xin Li, Isothermal oxidation behavior of
NiCoCrAlTaY coating deposited by high velocity air-fuel spraying, Journal of Thermal Spray Technology,
2012, Vol.21, 391-399
168. Chang-Jiu Li,
Yong Li, Guan-Jun Yang, Cheng-Xin Li, A novel plasma-sprayed durable thermal
barrier coating with the well-bonded YSZ interlayer between porous YSZ and bond
coat, Journal of Thermal Spray
Technology, 2012, Vol.21, 383-390
169. Hong-Tao
Wang, Chang-Jiu Li, Gang-Chang Ji,
and Guan-Jun Yang, Annealing Effect on the Intermetallic Compound Formation of
Cold Sprayed Fe/Al Composite Coating, Journal
of Thermal Spray Technology, 2012, Vol.21, 571-577.
170. L.-H.
Tian, C.-X. Li, C.-J. Li, G.-J.
Yang, Effect of dispersed TiC content on the microstructure and thermal
expansion behavior of shrouded-plasma-sprayed FeAl/TiC composite coatings, J. Thermal Spray Technol., 21(2012)689-694
171. ChengXin
Li, GuanJun Yang, Changjiu Li,
Influence of atmospheric plasma-sprayed composite cathode on the performance of
solid fuel cells, Rare Metals Materials
and Engineering, 2012, 41(S1),
448-452.
172. Xue-Long
He, Mei Liu, Guan-JunYang, Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Preparation of flexible Pt counter
elctrode on indium-doped tin oxide coated polyethylene naphthalate for
dye-sensitized solar cells, 2011, Rare Metals Materials and
Engineering, 2012, 41(S1), 464-466
173. Guan-Jun
Yang, Xiao-Hu Kang, Cheng-Xin Li, Chang-Jiu
Li, Influence of deposition temperature on the splat bonding and mechanical
properties of plasma-sprayed tungsten coatings, Rare Metals Materials and Engineering, 2012, 41(S1), 394-398
174. Xue-Long
He, Guan-Jun Yang, Hai-Long Yao, Chang-Jiu Li,
Shan Li, Mei Liu, Sheng-Qiang Fan, Strategy to Improve the Performance of
Dye-sensitized Solar Cells Based on TiO2 Films Prepared by Room Temperature
Cold Spray, Rare Metals Materials and
Engineering, 2012, 41(S1), 191-194
175. Li-Hui Tian, Cheng-Xin Li, Guan-Jun Yang, Chang-Jiu Li, Formation of
Iron-aluminide Coating through Annealing of Shrouded Plasma-sprayed
Iron/aluminum Composite, Rare Metals
Materials and Engineering, 2012, 41(S1),
367-471
176. Xiao-Tao
Luo, Chang-Jiu Li, Dual-scale oxide
dispersoids reinforcement of Fe40at.%Al intermetallic coating for both high
hardness and high fracture toughness, Materials
Science and Engineering A, A 555 (2012) 85-92
177. Cheng-Xin
Li, Liang-Liang Yun, Yang Zhang, Chang-Jiu
Li, Lie-Jin Guo, Microstructure, Performance and
Stability of Ni/Al2O3 cermet-supported SOFC operating
with coal-based syngas produced using supercritical water, International Journal of Hydrogen Energy, 2012,
Vol.37, pp.13001-13006
178. Cheng-Xin Li, Shuai Liu, Yang
Zhang, Chang-Jiu Li, Characterization of the Microstructure and
Electrochemical Behavior of Sm0.7Sr0.3Co3-δ Cathode
Deposited by Solution Precursor Plasma Spraying, International Journal of Hydrogen Energy, 2012,
Vol.37, pp.13097-13102
179. Xiao-Ming
Wang, Cheng-Xin Li, Chang-Jiu Li,
Guan-Jun Yang, Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13879-12885
180. Biao
Chen, Chang-Jiu Li, Guan-Jun Yang,
Jian-Tao Yao, Hui-Bin Huo, Cheng-Xin Li, Fabrication of Porous Molybdenum by
Controlling Spray Particle State, Journal
of Thermal Spray Technology, 2012, Vol.21, pp 1032-1045
2013
181. Chang-Jiu Li,
Guan-Jun Yang, Relationships between feedstock structure, particle parameter,
coating deposition, microstructure and properties for thermally sprayed
conventional and nanostructured WC-Co, Int. Journal of Refractory Metals and Hard Materials, 2013, Vo.39, pp.2-17 http://dx.doi.org/10.1016/j.ijrmhm.2012.03.014
182. Xiao-Tao
Luo, Guan-Jun Yang, Chang-Jiu Li, Minimization of iron contamination
during mechanical alloying preparation of cubic BN particle reinforced NiCrAl
matrix composite powder, Journal of
Alloy and compound, 2013, 548, pp.180-187
183. Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Development of the Particle
Interface Bonding in Thermal Spray Coatings: A Review, Journal of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 192-206, DOI: 10.1007/s11666-012-9864-9
184. Guan-Jun Yang, Chang-Jiu
Li, Cheng-Xin Li, A. Ohmori, K. Kondoh, Improvement of Adhesion and
Cohesion in Plasma sprayed Ceramic Coatings by Heterogeneous Modification of
Nonbonded Interface through High Strength Adhesive Infiltration, Volume
22, Issue 2 (2013), Page 36-47
185. Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Characterization of Nonmelted Particles in
Plasma-Sprayed Al2O3 Coatings by Scanning Electron Microscopy, Raman Analysis
and X-Ray Diffraction Analysis, Journal
of Thermal Spray Technology, Volume 22, Issue 2 (2013), Page 131-137
186. E.-J. Yang, G.-J. Yang, X.-T. Luo, C.-J. Li, M. Takahashi, Epitaxial Grain Growth during Splat Cooling
of Alumina Droplets Produced by Atmospheric Plasma Spraying, Journal of Thermal Spray Technology, Volume
22, Issue 2 (2013), Page 152-157, DOI: 10.1007/s11666-012-9862-y
187. Shan-Lin
Zhang, Cheng-Xin Li, Chang-Jiu Li,
Guan-Jun Yang, Microstructure and Properties of Porous Ni50Cr50-Al2O3 Cermet Support for Solid Oxide Fuel Cells, Journal of Thermal Spray Technology, Volume
22, Issue 2 (2013), Page 158-165
188. Guan-Jun Yang, Su-Ning Zhao, Cheng-Xin Li, Chang-Jiu Li, Effect of Phase
Transformation Mechanism on the Microstructure of Cold-sprayed Ni/Al-Al2O3 Composite Coatings during Post-spray Annealing Treatment, Journal of Thermal Spray Technology, Volume
22, Issue 2 (2013), Page 398-405
189. Hai-Long
Yao, Guan-Jun Yang, Shan Li, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Synergistic effects of
high temperature and impact compaction on the nano-TiO2 film for the significant improvement of photovoltaic performance of flexible
dye-sensitized solar cells, Electrochimica
Acta, 2013, Vol.87, pp.940-947
190. Xue-Long He, Mei Liu, Guan-Jun Yang, Hai-Long
Yao, Sheng-Qiang Fan, Chang-Jiu Li,
Photovoltaic performance degradation and recovery of the flexible
dye-sensitized solar cells by bending and relaxing, Journal of Power Sources, 2013, V.226, p.173-178
191. Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li , Guan-Jun Yang, Zhi-Hai
Han, Scandia Stabilized Zirconia Electrolyte with Improved Inter-Lamellar Bonding by High Velocity Plasma Spraying for High Performance Solid Oxide Fuel Cells, Journal of Power Sources, 2013, V.232, p.123-131
192. Li-Hui Tian, ChengXin Li, Guan-Jun Yang, Chang-Jiu Li, Effect of TiC addition
and high-temperature annealing on the microstructure and electrical
conductivity of shrouded-plasma-sprayed FeAl/TiC coatings, Journal of Power Sources, 2013, V.233,
p.394-400
193. Guan-Jun Yang, Zheng-Long Chen, Cheng-Xin Li, Chang-Jiu Li, Microstructure and
mechanical property evolution of plasma-sprayed YSZ coating during high
temperature exposure: comparison study between 8YSZ and 20YSZ, Journal of Thermal Spray Technology,
Volume 22, Issue 6 (2013), p.1294-1302
194. Hua Xie, Ying-Chun Xie, Guan-Jun Yang,
Cheng-Xin Li, Chang-Jiu Li, Modeling
thermal conductivity of thermally sprayed coatings with intra-splat cracks, Journal of
Thermal Spray Technology, Volume 22, Issue 6 (2013), pp.1328-1336
195. Chang-Jiu
Li, Yong Li, Guan-Jun
Yang, Cheng-Xin Li, Evolution of Lamellar Interface Cracks during Isothermal
Cyclic Test of Plasma-Sprayed 8YSZ coating with a columnar structured YSZ
interlayer, Journal of Thermal Spray Technology, Volume 22, Issue 6 (2013), pp.1374-1382
196. Guan-Jun Yang, Cheng-Xin Li, Shun Hao, Ya-Zhe
Xing, Er-Juan Yang, Chang-Jiu Li,
Critical bonding temperature for the splat bonding formation during plasma
spraying of ceramic materials, Surface
& Coatings Technology, 2013, V.235, p.841-847
197. R. Xie, D. Li, G.
Yang, C. Li, The
influence of zirconium carbide addition on oxidation behaviour of NiAl coatings
prepared by cold spraying of ball-milled Ni-Al alloy powder, Materials Science and Technology, 2013,
Vol.29(9), pp.1125-1129 DOI: 10.1179/1743284713Y.0000000289
2014
198. Xue-Long He, Guan-Jun Yang Chang-Jiu Li, Cheng-Xing Li, Influence
of accelerating gas flow rate on the particle cohesion in room temperature cold
sprayed scattering layer for plastic-based dye-sensitized solar cell, Applied Surface Science, 2014, V. 288,
pp.416-422 0169-4332 WOS:000327493400055
199. Xue-Long He, Guan-Jun Yang, Hai-Long Yao,
Sheng-Qiang Fan, Chang-Jiu Li, Room
temperature cold sprayed TiO2 scattering layer for high performance and bending
resistant plastic dye-sensitized solar cells, Journal of Power Sources, 2014, V.251, pp.122-129 WOS:000330256400014 ISSN: 0378-7753
200. Hui Dong, Guan-Jun Yang, Cheng-Xin Li,
Xiao-Tao Luo, Chang-Jiu Li, Effect
of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma-Sprayed
TBCs, Journal
of American Ceramic Society, 97 [4] 1226-1232 (2014), DOI:
10.1111/jace.12868
WOS:000333550500035
ISSN: 0002-7820
201. Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Chemical compatibility and properties of suspension plasma sprayed SrTiO3-based anodes for intermediate-temperature solid
oxide fuel cells, Journal of Power
Sources, 264(2014), pp.195-205
WOS:000337861800025
202. Shan-lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Plasma-Sprayed Y2O3-Stabilized
ZrO2 Electrolyte With Improved Interlamellar Bonding for Direct Application to
Solid Oxide Fuel Cells, Journal of Fuel
Cell Science and Technology, Transactions of the ASME, JUNE 2014, Vol.
11(3), 031005, Paper No: FC-12-1063; DOI: 10.1115/1.4026143 WOS:000335950300005 ISSN: 1550-624X
203. Hai-Long Yao, Jun-Hua Ma, Guan-Jun Yang,
Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Nano-porous TiO2 layer using ultrafine nano-particles
for the blocking layer in dye-sensitized solar cells, Journal of Nanoscience and Nanotechnology Letters,
2014, 14(4):2829-2835
WOS:000332226600018
204. Tao Liu, Er-Juan Yang, Guan-Jun Yang,
Cheng-Xin Li, Chang-Jiu Li, The
interface bonding formation during plasma spraying of La2Zr2O7 coating, Materials Research Innovations, 2014,
2014, Vol.18[S4], pp. S973-S978
205. Xiao-Tao Luo, Guan-Jun Yang, Chen-Xin Li, Chang-Jiu Li, Microstructure,
mechanical properties and two body abrasive wear behavior of cold-sprayed
20vol.% cubic BN-NiCrAl nanocomposite coating, Journal of Thermal Spray Technology, 2014, 23, 1181-1190 ISSN:1059-9630 INSPEC:14994280
206. Jian-Tao Yao, Jun-Qiang Ren, Hui-Bin Huo,
Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu
Li, Deposition
Behavior of Semi-Molten Spray Particles During Flame Spraying of Porous Metal
Alloy, Journal of Thermal Spray
Technology, 2014, 23, 991-999 INSPEC:14965566 ISSN:1059-9630
207. X.-T. Luo, C.X. Li, F.L. Shang, G.J. Yang,
Y.Y.Wang, C.-J. Li, High velocity
impact induced microstructure evolution during deposition of cold spray
coatings: A review Surf. Coat. Technol. (2014), 254:11-20. INSPEC:14966197 ISSN:0257-8972 http://dx.doi.org/10.1016/j.surfcoat.2014.06.006
208. X.M. Wang, C.X. Li, J.Y. Huang, G.J.Yang,
C.-J .Li, Deposition mechanism of convex YSZ particles and effect of
electrolyte/cathode interface structure on cathode performance of solid oxide
fuel cell, International Journal of
Hydrogen Energy, 2014,39(25):13650-13657
INSPEC:14994013 ISSN:0360-3199
209. Y.Z.Hu, C.X. Li, G.J. Yang, C.J. Li, Evolution of microstructure
during annealing of Mn1.5Co1.5O4 spinel coatings deposited by atmospheric
plasma spray, International Journal of
Hydrogen Energy, 2014,39(25):13844-13851 WOS:000341343200102 ISSN: 0360-3199
210. Jian-Tao Yao, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Fabrication of Porous
Stainless Steel by Flame Spraying of Semimolten Particles, Materials Manufacturing Processes, 2014, 29(10):1253-1259 WOS:000342065100017 ISSN: 1042-6914
211. Er-Juan Yang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Makoto Takahashi, Effect
of intersplat interface bonding on the microstructure of plasma-sprayed Al2O3
coating, IOP Conf. Series: Materials
Science and Engineering, 61 (2014) 012022
doi:10.1088/1757-899X/61/1/012022
WOS:000346794000022 ISSN: 1757-8981
2015
212. X.T. Luo, C.X. Li, C-J Li. WC-Co composite
coating deposited by cold spraying of a core-shell structured WC-Co powder, Journal of Thermal Spray Technology,
2015, Vol.24, pp.100-107 WOS:000347416800013
ISSN: 1059-9630; DOI: 10.1007/s11666-014-0133-y
213. Shan-Lin Zhang, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Meilin Liu, Atmospheric
plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for
intermediate-temperature solid oxide fuel cells, Journal of Materials Chemistry A, 2015, 3, p.7535-7553
ISSN: 2050-7488; WOS:000351845400043; DOI: 10.1039/c5ta01203a
214. Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, M. Takahashi, Epitaxial
Grain Growth during 8YSZ Splat Formation on Polycrystalline YSZ Substrates by
Plasma Spraying, Surface & Coatings
Technology, 2015, 274, 37-43
WOS:000356115700005
ISSN: 0257-8972; DOI: 10.1016/j.surfcoat.2015.04.031
215. Xiao-Tao Luo, Cheng-Xin Li, Guan-Jun Yang, Chang-Jiu Li, Lager sized cBN
reinforced nanocomposite matrix cubic BN-NiCrAl composite coating with improved
abrasive wear resistance deposited by cold spray, Materials & Design, 2015, pp.249-256; WOS:000359329000030;
ISSN: 0261-3069; DOI: 10.1016/j.matdes.2015.06.009;
216. Jian-Tao Yao, Chang-Jiu Li, Yi Li, Biao Chen, Hui-Bin Huo, Relationships between
the properties and microstructure of Mo-Cu composites prepared by infiltrating
copper into flame-sprayed porous Mo skeleton, Materials and Design, 88 (2015) 774-780 WOS:000364257300091 ISSN: 0261-3069; DOI:
10.1016/j.matdes.2015.09.062
217. Hui Dong, Guan-Jun Yang, Hong-Neng Cai,
Cheng-Xin Li, Chang-Jiu Li,
Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient
thermal cycling, Ceramics International, 41(3)(2015) 3481-3489;
ISSN: 0272-8842
WOS:000350188900018; DOI: 10.1016/j.ceramint.2014.10.174
218. Guan-Jun Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Mechanical property and
wear performance dependence on processing condition for cold-sprayed
WC-(nanoWC-Co), Applied Surface Science,
2015, 332, pp. 80-88; ISSN:0169-4332;
INSPEC:14969621; WOS:000350373300011; DOI: 10.1016/j.apsusc.2015.01.138
219. Hai-Long Yao, Guan-Jun Yang, Sheng-Qiang Fan,
Cheng-Xin Li, Chang-Jiu Li, Ceramic
nano-particle/substrate interface bonding formation derived from dynamic
mechanical force at room temperature: HRTEM examination, Journal of Thermal Spray Technology, 24(4) (2015) 720-728; ISSN: 1059-9630;
WOS:000351587600014; DOI: 10.1007/s11666-015-0226-2
220. Hui Dong, Guan-Jun Yang, Hong-Neng Cai, Hang
Ding, Cheng-Xin Li, Chang-Jiu Li,
The influence of temperature gradient across YSZ thickness on thermal cyclic
lifetime of plasma-sprayed thermal barrier coatings, Ceramics International, 2015, 41, Issue 9, Part A, November 2015,
Pages 11046-11056; WOS:000359165500088; ISSN: 0272-8842; DOI:
10.1016/j.ceramint.2015.05.049
221. Xiao-Tao Luo, Ying-Kang Wei, Yan Wang, Chang-Jiu Li, Microstructure and
mechanical property of Ti and Ti6Al4V prepared by an in-situ shot
peening assisted cold spraying, Materials
& Design, Volume 85, 15 November 2015, Pages 527-533;
ISSN: 0261-3069;
WOS:000364585000062; DOI: 10.1016/j.matdes.2015.07.015
222. Tao Liu, Xiao-Tao Luo, Xu Chen, Guan-Jun
Yang, Cheng-Xin Li, and Chang-Jiu Li,
Morphology and Size Evolution of the Inter-Lamellar Two-Dimensional Pores in
Plasma Sprayed La2Zr2O7 Coatings during Thermal Exposure at 1300°C, Journal of Thermal Spray Technology,
24(2015)739-748; WOS:000364585000062; ISSN: 1059-9630; DOI:
10.1007/s11666-015-0236-0
223. Xue-Long He; Mei Liu, Guan-Jun Yang; Baizeng
Fang, Chang-Jiu Li; Unexpected
efficiency enhancement of flexible dye-sensitized solar cells by repeated
outward bending, RSC Adv. RSC Advances, 2015, 5, 85174–85178
ISSN: 2046-2069; WOS:000363179900002; DOI: 10.1039/c5ra19365f
224. Bang-Yan Zhang, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Healing of the interface
between splashed particles and underlying bulk coating and its influence on
isothermal oxidation behavior of LPPS McrAlY bond coat, Journal of Thermal Spray Technology, 2015,Volume 24,Issue 4,pp
611-621; WOS:000351587600002; ISSN: 1059-9630; DOI: 10.1007/s11666-015-0218-2
225. Qing-Yu Chen, Xiao-Zhuang Peng, Guan-Jun
Yang, Cheng-Xin Li, Chang-Jiu Li,
Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ
Using a < 80 kw shrouded torch based on optical emission spectroscopy, Journal of Thermal Spray Technology,
2015,Volume 24,Issue 6, pp 1038-1045; WOS:000358965400015; ISSN: 1059-9630;
DOI: 10.1007/s11666-015-0248-9
226. E.-J. Yang, G.-J. Yang, C.-X. Li, C-J. Li, A
TEM Study of the Bonded Splat Interface Microstructure of Plasma-Sprayed YSZ
Coating, Journal of Thermal Spray
Technology, 2015, August 2015,Volume 24,Issue6,pp 907-914;
WOS:000358965400002; ISSN: 1059-9630; DOI: 10.1007/s11666-015-0260-0
227. Xue-Long He; Ruo-Xi Shen; Chang-Jiu Li; Sheng-Qiang Fan, Baizeng
Fang, Guan-Jun Yang, Behavioral study of the flexible platinum counter
electrodes under alternating bending, RSC Adv., 2015,5,
73155-73161; WOS:000360552000082; ISSN: 2046-2069; DOI: 10.1039/c5ra13256h
228. Xue-Long He, Guan-Jun Yang, Chang-Jiu Li, Mei Liu, Sheng-Qiang Fan,
Failure mechanism for flexible dye-sensitized solar cells under repeated
outward bending: cracking and spalling off of nano-porous titanium dioxide
film, Journal of Power Sources,
2015, 280, pp.182-189; WOS:000350941400025;
ISSN:0378-7753 INSPEC:14936124;
DOI: 10.1016/j.jpowsour.2015.01.088
229. Guang-Rong Li, Bo-Wen Lv, Guan-Jun Yang,
Wei-Xu Zhang, Cheng-Xin Li, Chang-Jiu Li,
Relationship between lamellar structure and elastic modulus of thermally
sprayed thermal barrier coatings with intra-splat cracks, Journal of Thermal Spray Technology, 2015, 24, 1355-1364 WOS:000366369800006; ISSN:1059-9630DOI:
10.1007/s11666-015-0292-5
230. Qing-Yu Chen, Cheng-Xin Li, Tao Wei, Haibin
Sun, Shan-Lin Zhang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Meilin Liu, Controlling grain size in columnar YSZ
coating formation by droplet filtering assisted PS-PVD processing, RSC Advances, RSC Adv. 102126. Volume:
5, Issue: 124. 2015 WOS:000366162300001
ISSN: 2046-2069; DOI: 10.1039/c5ra20799a
2016
231. Tao Liu, Shu-Wei Yao, Guan-Jun Yang,
Cheng-Xin Li, Chang-Jiu Li,
Atmospheric Plasma Sprayed 8YSZ Layer of Enhanced Splat Bonding as Protective
Layer for Thermal Barrier Coatings against CMAS Infiltration and Corrosion, Journal of Thermal Spray Technology,
2016, 25, pp.213-221;
232. Tao Liu, Shan-lin Zhang, Xiao-tao Luo,
Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu
Li, High Sintering-Resistant Plasma-sprayed Thermal Barrier Coatings
Designed with Large Two-dimensional Inter-lamellar Voids, Journal of Thermal Spray Technology, 2016, 25, pp.222-230
233. Chang-Jiu
Li, Jiao Zou, Hui-Bin
Huo, Jian-Tao Yao, Guan-Jun Yang, Microstructure and Properties of Porous
Abradable Alumina Coatings Flame-Sprayed by Semi-Molten Particles, Journal of Thermal Spray Technology,
2016, 25, pp.222-230 (DOI: 10.1007/s11666-015-0287-2)
234. Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Meilin
Liu, Application of high velocity oxygen fuel spraying to
the fabrication of La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte for intermediate-temperature
solid oxide fuel cells, Journal of Power
Sources, 2016, V.301, pp.62-71; WOS:000365060500009; ISSN: 0378-7753; DOI:
10.1016/j.jpowsour.2015.09.050
235. Er-Juan Yang, Xiao-Tao Luo, Guan-Jun
Yang, Chang-Jiu Li, M.
Takahashi, Impact of deposition temperature on crystalline structure of
plasma-sprayed Al2O3 splats revealed by FIB-HRTEM technique, Ceramics International, Volume 42,
Issue 1, Part A, January 2016, Pages 853–860
WOS:000365369500101
ISSN: 0272-8842; DOI: 10.1016/j.ceramint.2015.09.010
236. Qing-Yu Chen, Cheng-Xin Li, Jian-Zhuang Zhao,
Guan-Jun Yang, Chang-Jiu Li,
Microstructure of YSZ coatings deposited by PS-PVD using 45kW shrouded plasma
torch, Materials Manufacturing Processes,
2015, accepted, DOI: 10.1080/10426914.2015.1019100
237. Yi Liu, Yuyue Wang, Xinkun Suo, Yongfeng
Gong, Chang-Jiu Li, Hua Li, Impact-induced
bonding and boundary amorphization of TiN ceramic particles during room
temperature Vacuum cold spray
deposition, Ceramics International, 2016, Vol.42(1), 1640–1647 WOS:000365367000080 ISSN: 0272-8842; DOI:
16/j.ceramint.2015.09.116
238. X.T. Luo, Y.J. Li, C.-J. Li, A comparison of cold spray deposition behavior between
gas atomized and dendritic porous electrolytic Ni powders under the same spray
conditions; Materials Letters, 2016,
Vol.163, pp.58-60; WOS:000366081400016; ISSN: 0167-577X; DOI:
10.1016/j.matlet.2015.10.048
