Engaged in investigations on designs, synthesis, mechanical properties and physical and chemical characteristics of advanced structure and functional ceramic materials, nanocomposite materials, porous materials, transparent ceramic materials.

03/2009—08/2009 Sunmoon University, Korea. Visiting Scholar.
09/2009—04/2012 Department of Mechanical Engineering, Nagaoka University of Technology, Japan. Post-doctoral.
07/2012—11/2014 Materials Science and Engineering, Xi’an Jiaotong University. Lecturer.
14/2014—now Materials Science and Engineering, Xi’an Jiaotong University. Associate Professor.

09/1998—07/2002 Materials Science and Engineering, Xi’an Jiaotong University. Bachelor.
09/2002—07/2005 Physical Chemistry of Materials, Xi’an Jiaotong University. Master.
09/2005—09/2009 School of Materials Science, Xi’an Jiaotong University, Ph.D.

[47] S-C Xu, N-L Zhang, J-F Yang, B Wang, C-Y Kim, Silicon carbide-based foams derived from foamed SiC-filled phenolic resin by reactive infiltration of silicon, Ceramics International, 2016.

[46] D-J Zeng, H Zhang, J-F Yang, B Wang, L Zhang, Microstructure and property of porous mullites with a whiskers framework obtained by a sol-gel process, Ceramics International, 42(2016)11270-11274.

[45] D-J Zeng, Y-M Zhang, J-F Yang, B Wang, J Matsushita, Fabrication and Property of Mullite Whiskers Frameworks with an Ultrahigh Porosity by Expandable Mesocarbon Microbeads, Journal of the American Ceramic Society, 99 [7] (2016) 2226-2228.

[44] S, Song, C Bao, B Wang, Effect of the addition of carbon fibres on the microstructure andmechanical properties of reaction bonded B4C/SiC composites, Journal of the European Ceramic Society, 36 (2016) 1905-1913.

[43] X Yang, J Bai, W Jing, B Wang, J Yang, Strengthening of low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation of cBN abrasives, Ceramics International, 42(2016) 9283-9286.

2015年

[42] H-H- Zhang, Y-L Xu, B Wang, X Zhang, J-F Yang, K Niihara, Effects of Heating Rate on the Microstructure and Mechanical Properties of Rapid Vacuum Sintered Translucent Alumina. Ceramics International,  41(2015)12499–12503

[41] H Zhang, Z He, Y Zhang, W Jing, B Wang, J-F Yang, Lithium Disilicate Glass-Ceramics by Heat Treatment of Lithium Metasilicate Glass-Ceramics Obtained by Hot Pressing, Journal of the American Ceramic Society,  98[12] (2015) 3659-3662.

[40] B Wang, Z-Y Xu, F Jin, J-F Yang, K Ishizaki. Synthesis of rod-like β-Si3N4 seed crystals with tailored morphogy.  Ceramics International, 41(2015)5348–5354.

[39] H Zhang, Y Zhang, B Wang, J Yang. Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker, Chemical Engineering Journal,  268(2015)109-115.

[38] B Wang, H Zhang, F Jin, J-F Yang.Gas Permeability and Adsorbability of the Glass-bonded Porous Silicon Carbide Ceramics with Controlled Pore size.  Ceramics International, 41(2015) 2279–2285.

[37] T Zhao, Y Qin, B Wang*, J Yang*. Improved densification and properties of pressureless-sintered lithium disilicate glass-ceramics, Materials Science and Engineering A, 620(2015) 399–406.

[36] T Zhao, Y Qin, B Wang, J-F Yang.  Comparative Study of Hydrogen and Argon Dilution Effects in Amorphous SiC Thin Films Deposited by Plasma Enhanced Chemical Vapor Deposition. Journal of Nanoscience and Nanotechnology, 15 (2015)7371-7375.

[35] Y Qin, T Zhao, B Wang, J-F Yang.  Deposition Time Dependent Size of Si Quantum Dots Embedded in Amorphous SiC Matrix. Journal of Nanoscience and Nanotechnology, 15 (2015)7346-7350.

[34] D Zeng, H Zhang,  B Wang, K Sang, J Yang.  Effect of Ammonia Concentration on Silica Spheres Morphology and Solution Hydroxyl Concentration in Stober Process. Journal of Nanoscience and Nanotechnology, 15 (2015)7407-7411.

[33] K Zhang, HY Xia, B Wang, ZQ Shi, XZ Zhang, GW Liu, GJ Qiao. Preparation and Thermal-Physical Properties of Three Dimensional Bicontinuous SiC/Cu-Si Composite. Materials Science Forum, 804 (2015)187~190.

2014年

[32] T Zhao, Y Qin, T Wu, B Wang, J Yang, Effect of Particle Size on the Sintering Behavior, Microstructure and Flexural Strength of Lithium Disilicate Glass-Ceramics, Rare Metal Materials and Engineering,  43[S1] (2014) 024-028.

[31] B Wang, X-H Yang, D-J Zeng, J-F Yang, K Ishizaki, K Niihara. Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero thermal expansion. Journal of the European Ceramic Society, 34(2014)91-95.

[30] B Wang, Y Qin, F Jin, J-F Yang, K Ishizaki. Pulse Electric Current Sintering of Cubic Boron Nitride/Tungsten Carbide-Cobalt (cBN/WC-Co) Composites: Effect of cBN Particle Size and Volume Fraction on their Microstructure and Properties, Materials Science and Engineering A, 607(2014) 490-497.

[29] B Wang, Z-Y Xu, W-Z Lu, F Jin, J-F Yang, K Niihara. Effect of Porous Si3N4 Preforms on the Mechanical Properties of Si3N4/Al Composites with Interpenetrating Network Structure, Materials Science and Engineering A, 607(2014) 307-312.

[28] B Wang, S-C Xu, F Jin, J-F Yang, K Ishizaki, K Niihara.  Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous ceramics with near zero thermal expansion. Ceramics International, 40(2014)2853-2856.

[27] Y Qin, T Zhao, B Wang*, P Zhang, J Yang*, Development of transverse thermoelectric voltage effect in artificial SrTiO3/SrTi1-xNbxO3 epitaxial multilayer films with incline-oriented sublayers, CrystEngComm, 16(2014) 5345-5351.

[26] Z Xu, B Wang, J Yang, Z Zhao. Preparation of Porous Si3N4 Ceramics with Controlled Porosity and Microstructure by Fibrous α-Si3N4  Addition, Journal of the American Ceramic Society, 97[11] (2014)3392–3395.

[25] T Zhao, Y Qin, P Zhang,  B Wang, J-F Yang. High-performance, reaction sintered lithium disilicate glass-ceramics. Ceramics International, 40(2014) 12449-12457.

[24] HH Zhang, Y Hang, Y Qin, JF Yang, B Wang. Synthesis and characterization of sol–gel derived continuous spinning alumina based fibers with silica nano-powders. Journal of the European Ceramic Society, 34(2014)465–473.

[23] HH Zhang, DJ Zeng, B Wang, JF Yang. Preparation and characteristics of spinnable sol and continuous mullite fibers with nano silica addition. Journal of Sol-Gel Science and Technology, 69(2014)311-319.

[22] 秦毅, 赵婷, 王波, 杨建峰. PECVD沉积和原味退火时间对h-BN薄膜组成及光学带隙的影响. 无机材料学报, 29 (2014)729-734 .

[21] 张俊熙，徐照芸，王波，秦毅，杨建锋，氮气压力对多孔氮化硅陶瓷显微结构组织和力学性能的影响，无机材料学报，29 (2014)701-705.

2013年

[20] Y Qin, T Zhao H-H Zhang,  B Wang, P-X Zhang, J-F Yang. Large transverse thermoelectric voltage effect in incline-oriented SrTi1-xNbxO3 films with cubic structure. Applied Physics Letters, 102(2013) 253901.

[19] 王波，徐少春，徐照芸，杨建锋. 近零膨胀多孔SiC/LAS 陶瓷材料的制备与性能. 功能材料, 增刊1( 2013)1001-1560.

2012年

[18] B Wang,  K Matsumaru, J. Yang, Z. Fu, K. Ishizaki.  Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores. Acta Materialia, 60(2012)4185-4193.

[17] B Wang, K Matsumaru, J. Yang, Z. Fu, K. Ishizaki. The Effect of cBN Additions on Densification, Microstructure and Properties of WC-Co Composites by Pulse Electric Current Sintering. Journal of the American Ceramic Society, 95 (2012) 2499-2503.

2011年

[16] B Wang, R Hanawa, J Yang, K Matsumaru, K Ishizaki. Influence of gas pressure on the surface composition of capsule-free HIPed borosilicate glass. IOP Conference Series: Materials Science and Engineering, 20(2011) 012011.

[15] B Wang, K Matsumaru, H Ishiyama, J Yang, K Ishizaki, J Matsushita. Low temperature oxidation of Titanium nitride under high oxygen pressure by O2-HIP. Advances in Technology of Materials and Materials Processing Journal (ATM) 13 (2011) 7-13.

[14] B Wang, K Matsumaru, J Yang, K Ishizaki. High strength borosilicate foams by expansion of Ar-filled pores and release of dissolved Ar gas. Advances in Technology of Materials and Materials Processing Journal (ATM) 13 (2011) 24-29.

[13] PY. Dai, Y.Z. Wang, G.L. Liu, B Wang, Y.G. Shi, J.F.Yang, G.J. Qiao, H.J. Wang. Fabrication of highly dense pure SiC ceramics via the HTPVT method. Acta Materialia, 59(2011)6257-6263.

[12] C Chen, C Chu, J Yang, C Bao, G Qiao, D Tian, B Wang, K Ishizaki, K Niihara. Effect of raw materials on microstructure and bending strength of porous in situ MgO/Fe–Cr–Ni composites. Materials Science and Engineering A, 528(2011)8438-8442.

2010年

[11] B Wang, K Banzai, N Kuribayashi, J Yang, K Matsumaru, K Ishizaki. Microstructure and properties of c-BN dispersed WC composites. Advances in Technology of Materials and Materials Processing Journal (ATM), 12 (2010) 58-63.

[10] B Wang, J Yang, J Gao, K Niihara. Fabrication of Barium Aluminosilication -Silicon Nitride-Carbon Nanotube Composites By Pressureless Sintering. Ceramic Transactions, 2010, 257-264.