1 Advanced wear resistance materials

2 Friction and wear behaviors and damage mechanisms

3 Directional solidification of alloys

4 Fabrication of anti- high temperature and wear cermets

12/2018—now, School of Materials Science and Engineering, Xi’an Jiaotong University, Lecturer.

12/2018—now, School of Mechanical Engineering, Xi’an Jiaotong University, Post-doc.

09/2013—12/2018, School of Materials Science and Engineering, Xi’an Jiaotong University, Ph. D.

10/2017—10/2018, School of Mechanical Engineering Technology, Purdue University, Visiting Scholar.

09/2009—07/2013, School of Materials Science and Engineering, Xi’an Jiaotong University,    Bachelor

2018 Hundred Stars of MSE, Xi’an Jiaotong University

2017 Social Scholarship, Xi’an Jiaotong University

2016 Excellent Postgraduate, Xi’an Jiaotong University

2015 First-class Academic Scholarship, Xi’an Jiaotong University

2014 Excellent Postgraduate Cadre, Xi’an Jiaotong University

2013 Excellent Graduate Cadre, Xi’an Jiaotong University

1.          Jian YX*, Xing JD, Huang ZF, et al. Quantitative characterization of the wear interactions between the boride and metallic matrix in Fe-3.0 wt% B duplex alloy[J]. Wear, 2019: 203021. (SCI)

2.          Zhang L, Huang ZF, Liu YZ, Jian YX*, et al. Effect of Ni content on the microstructure, mechanical properties and erosive wear of Mo2NiB2–Ni cermets[J]. Ceramics International, 2019. (SCI)

3.          Zhang L, Huang ZF, Jian YX*, et al. High-temperature compressive properties and tribological behaviour of Mo2NiB2–Ni cermets[J]. Ceramics International, 2019, 45(15): 18413-18421. (SCI)

4.          Zhang L, Huang ZF, Liu YZ, Jian YX*, et al. Effects of Mechanical Ball Milling Time on the Microstructure and Mechanical Properties of Mo2NiB2-Ni Cermets[J]. Materials, 2019, 12(12): 1926. (SCI)

5.          Chen ZH, Bao CG, Wu GQ, Jian YX, Zhang L. Effect of YAl2 Particles on the Corrosion Behavior of Mg–Li Matrix Composite in NaCl Solution[J]. Materials, 2019, 12(3): 549. (SCI)

6.          Jian YX, Huang ZF, Xing JD, et al. Phase stability, mechanical properties and electronic structures of Ti-Al binary compounds by first principles calculations[J]. Materials Chemistry and Physics, 2019, 221: 311-321. (SCI)

7.          Jian YX, Huang ZF, Xing JD, et al. Investigations on the mechanical properties and three-body wear behaviors of single Fe2B bulks with different chromium additions[J]. Wear, 2019, 418: 273-280. (SCI)

8.          Jian YX, Huang ZF, Xing JD, et al. Effects of chromium on the morphology and mechanical properties of Fe2B intermetallic in Fe-3.0 B alloy[J]. Journal of Materials Science, 2018, 53(7): 5329-5338. (SCI)

9.          Jian YX, Huang ZF, Xing JD, et al. Effect of molybdenum addition on mechanical properties of oriented bulk Fe2B crystal[J]. Journal of Materials Research, 2017, 32(9): 1718-1726. (SCI)

10.       Jian YX, Huang ZF, Xing JD, et al. Effects of chromium additions on the three-body abrasive wear behavior of Fe-3.0 wt% B alloy[J]. Wear, 2017, 378: 165-173. (SCI)

11.       Jian YX, Huang ZF, Xing JD, et al. Effects of Mn addition on the two-body abrasive wear behavior of Fe-3.0 wt% B alloy[J]. Tribology International, 2016, 103: 243-251. (SCI)

12.       Jian YX, Huang ZF, Xing JD, et al. Investigation on two-body abrasive wear behavior and mechanism of Fe–3.0 wt% B cast alloy with different chromium content[J]. Wear, 2016, 362: 68-77. (SCI)

13.       Jian YX, Huang ZF, Xing JD, et al. Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe–3.0 wt% B cast alloy[J]. Tribology International, 2016, 101: 331-339. (SCI)

14.       Jian YX, Huang ZF, Xing JD, et al. Effects of chromium addition on fracture toughness and hardness of oriented bulk Fe₂B crystals[J]. Materials Characterization, 2015, 110: 138-144.

15.       Li KM, Huang ZF, Wang SF, Jian YX, et al. Effect of oxidation time on the short time oxidation behavior and tribological performance of bulk Fe2B[J]. Materials Research Express, 2019, 6(10): 106506.

16.       Yi YL, Xing JD, Yu LL, Fu HG, Wan MJ, Lu YF, Jian YX, et al. Effect of casting thickness on microstructure, mechanical properties and abrasion resistance of Fe-B cast alloy[J]. Tribology International, 2018, 122: 179-188. (SCI)

17.       Wang Y, Xing JD, Fu HG, Liu YZ, Ma SQ, Jian YX, et al. Interfacial morphology and corrosion-wear behavior of cast Fe-3.5 wt.% B steel in liquid zinc[J]. Corrosion Science, 2018, 131: 290-299. (SCI)

18.       Li KM, Huang ZF, Jian YX, et al. Friction and Wear Behavior of Single-Phase Fe2B Bulk under Dry Sliding Condition[J]. Tribology Transactions, 2018, 61(3): 513-521.

19.       Shen YP, Huang ZF, Jian YX, et al. Investigation on microstructure and mechanical properties of Mo2FeB2 based cermets with and without PVA[J]. Materials Research Express, 2018, 5(3): 036505. (SCI)

20.       Zheng BC, Huang ZF, Xing JD, Wang Y, Jian YX, et al. Three-Body Abrasive Behavior of Cementite–Iron Composite with Different Cementite Volume Fractions[J]. Tribology Letters, 2016, 62(2): 32. (SCI)

21.       Yi YL, Xing JD, Wan MJ, Yu LL, Lu YF, Jian YX, et al. Effect of Cu on microstructure, crystallography and mechanical properties in Fe-BC-Cu alloys[J]. Materials Science and Engineering: A, 2017, 708: 274-284. (SCI)

22.       Jian YX, Huang ZF, Xing JD. Effects of Cr on the morphology and toughness of Fe2B in Fe-3.0 wt% B alloy. International Union of Materials Research Societies-The 15th International Conference on Advanced Materials, Kyoto, Japan, 2017.