1. Ying-Zhen
Hu, Liang-Liang Yun, Tao Wei, Cheng-Xin Li*, Zhen Qi,
Guan-Jun Yang, Chang-Jiu Li, Meilin Liu; Aerosol sprayed Mn1.5Co1.5O4
protective coatings for metallic interconnect of solid oxide fuel cells, Journal of Hydrogen Energy, 2016,
2. Atmospheric
plasma-sprayed BaZr0.1Ce0.7Y0.1Yb0.1O3-d (BZCYYb) electrolyte membranes for
intermediate-temperature solid oxide fuel cells, Ceramics International,
3. Shan-Lin Zhang,
Chang-Jiu Li, Cheng-Xin Li*, Guan-Jun Yang, Kevin Huang,
Meilin Liu, Liquid plasma sprayed nano-network
La0.4Sr0.6Co0.2Fe0.8O3/Ce0.8Gd0.2O2 composite as a high-performance cathode for
intermediate-temperature solid oxide fuel cells, Journal of Power Sources,
2016, 327, 622–628.
4. Shu-Wei
Yao, Chang-Jiu Li*, Jia-Jia Tian, Guan-Jun Yang, Cheng-Xin Li,
Conditions and mechanisms for the bonding of a molten ceramic droplet to a
substrate after high-speed impact, Acta Materialia, 2016, 119, 9-25.
5. Shan-Lin
Zhang, Cheng-Xin Li*, Chang-Jiu Li, Meilin Liu,
Guan-Jun Yang, Investigation into the diffusion and oxidation behavior of the
interface between a plasma-sprayed anode and a porous steel support for solid
oxide fuel cells, Journal of Power Sources, 2016, 323, 1-7.
6. Shan-Lin Zhang,
Hai-Xin Yu, Chang-Jiu Li, Cheng-Xin Li*, Samson Lai,
Guan-Jun Yang, Meilin Liu, Thermal sprayed high-performance porous
metal-supported solid oxide fuel cells with nanostructured
La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes, Journal of Materials Chemistry A, 2016, 4,
7461 – 7468.
7. Ying Li,
Shan-Lin Zhang , Cheng-Xin Li*, Tao
Wei, Guan-Jun Yang, Chang-Jiu Li, Meilin Liu, La2NiO4+δ Infiltration
of Plasma-Sprayed LSCF coating for Cathode Performance Improvement, Journal of
Thermal Spray Technology, 2016, 25(1-2), 392-400.
8. Shan-Lin Zhang, Cheng-Xin
Li*, Chang-Jiu Li, Guan-Jun Yang, Meilin Liu, Application of high
velocity oxygen fuel flame (HVOF) spraying to fabrication of
La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte for solid oxide fuel cells, Journal of
Power Sources, 2016, 301, 62-71.
9.Ying-Zhen Hu, Cheng-Xin
Li*, Shan-Lin Zhang, Guan-Jun Yang, Xiao-Tao Luo, Chang-Jiu Li, The
microstructure stability of Atmospheric plasma sprayed (Mn,Co)3O4 coating under
H2 and air environment, Journal of Thermal Spray Technology, 2016, 5 (1-2),
301-310.
10.Qing-Yu Chen, Cheng-Xin
Li*, Tao Wei, Haibin Sun, Shan-Lin Zhang, Xiao-Tao Luo, Guan-Jun Yang,
Chang-Jiu Li*, Meilin Liu, Controlling
grain size in columnar YSZ coating formation by droplet filtering assisted
PS-PVD processing, RSC Advances, 2015, 5,
102126-102133.
11. Qing-Yu
Chen, Cheng-Xin Li*, Jian-Zhuang Zhao, Guan-Jun Yanga,
Chang-Jiu Li, Microstructure of YSZ Coatings Deposited by PS-PVD Using 45kW
Shrouded Plasma Torch, Materials and Manufacturing Processes, 2015, 0, 1–9, 2015.
12. Shan-Lin
Zhang, Tao Liu, Chang-Jiu Li, Shu-Wei Yao, Cheng-Xin Li*, Guan-Jun
Yang, Meilin Liu Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte
membranes for intermediate-temperature solid oxide fuel cells, Journal of
Materials Chemistry A, 2015, 3, 7535 – 7553.
13. Cheng-Xin
Li, Bin Zhang, Xiao-Fei Qin, Guang-Yong Zhang, Xiao-Tao Luo, Guan-Jun
Yang, Chang-Jiu Li, Study of durability in molten zinc of plasma
sprayed Fe-Al/Al2O3 composite coatings, Materials
Manufacturing and Processing Technology, 2015, Accepted
14. Qing-Yu
Chen, Xiao-Zhuang Peng, Guan-Jun Yang, Cheng-Xin Li,
Chang-Jiu Li, Characterization of Plasma Jet in Plasma Spray-Physical Vapor
Deposition of YSZ Using a <80 kw shrouded torch based on optical emission spectroscopy, journal of thermal spray technology, 2015, 24(6), pp 1038-1045
15. Shan-Lin
Zhang, Cheng-Xin Li, Chang-Jiu Li, Dominant Factors
Influencing the Electrochemical Performance of Plasma-Sprayed LSGM Electrolyte,
ECS Transactions, 2015, 68(1), 433-439.
16. Tao Liu,
Xiao-Tao Luo, Xu Chen, Guan-Jun Yang, Cheng-Xin Li,
Chang-Jiu Li, Morphology and Size Evolution of Interlamellar
Two-Dimensional Pores in Plasma-Sprayed La2Zr2O7 Coatings During Thermal
Exposure at 1300oC, Journal of Thermal Spray Technology, 2015, 24(5), 739-,748.
17. Bang-Yan
Zhang, Jing Shi, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu
Li, Healing of the Interface Between Splashed Particles and Underlying Bulk
Coating and Its Influence on Isothermal Oxidation Behavior of LPPS MCrAlY Bond
Coat, Journal of Thermal Spray Technology, 2015, 24(4), 611-621.
18. Guan-Jun
Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Mechanical
property and wear performance dependence on processing condition for cold-sprayed
WC-(nanoWC-Co), Applied Surface Science, 2015, 332(30), 80-88.
19. Hai-Long
Yao, Guan-Jun Yang, Sheng-Qiang Fan, Cheng-Xin Li, and
Chang-Jiu Li, Ceramic Nano-particle/Substrate Interface Bonding Formation
Derived from Dynamic Mechanical Force at Room Temperature: HRTEM Examination, Journal
of Thermal Spray Technology, 2015, 24(4), 720-728.
20. Er-Juan Yang,
Xiao-Tao Luo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li,
Makoto Takahashi, Epitaxial grain growth during 8YSZ splat formation on
polycrystalline YSZ substrates by plasma spraying, Surface and Coatings
Technology, 2015, 274(25), 37–43.
21. Xiao-Tao Luo, Cheng-Xin
Li, Fu-Lin Shang, Guan-Jun Yang, Yu-Yue Wang, and Chang-Jiu Li, WC-Co
Composite Coating Deposited by Cold Spraying of a Core-Shell-Structured WC-Co
Powder, Journal of Thermal Spray Technology, 2015, 24(1-2), 100-107.
22. Hui Dong,
Guan-Jun Yang, Hong-Neng Cai, Cheng-Xin Li, Chang-Jiu Li,
Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient
thermal cycling, Ceramics International,
2015, 41(3), 3481-3489.
23. Hui Dong,
Guan-Jun Yang, Hong-Neng Cai, Hang Ding, Cheng-Xin Li,
Chang-Jiu Li, The influence of temperature gradient across YSZ on thermal
cyclic lifetime of plasma-sprayed thermal barrier coatings, Ceramics International,2015, 41(9).
24. Er-Juan
Yang, Xiao-Tao Luo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu
Li, A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near
Inter-splat Interfaces, 2015, 24(6), 907-914..
25. Qing-Yu
Chen, Cheng-Xin Li*, Jian-Zhuang Zhao, Guan-Jun Yang,
Chang-Jiu Li, Microstructure of YSZ coatings deposited by PS-PVD using
45kW shrouded plasma torch, Materials Manufacturing and Processing
Technology, 2015, 1532-2475.
26. Guang-Rong
Li, Bo-Wen Lv, Guan-Jun Yang, Wei-Xu Zhang, Cheng-Xin Li, Chang-Jiu Li,
Relationship Between Lamellar Structure and Elastic Modulus of Thermally
Sprayed Thermal Barrier Coatings with Intra-splat Cracks, Journal of
Thermal Spray Technology, 2015, 10.1007/s11666-015-0292-5
27. Xiao-Tao
Luo, Cheng-Xin Li, Fu-Lin Shang, Guan-Jun Yang, Yu-Yue Wang,
Chang-Jiu Li, High velocity impact induced microstructure evolution during
deposition of cold spray coatings: A review, Surface and Coatings Technology,
2014, 254, 11–20, 10.1016/j.surfcoat.2014.06.00616/j.jpowsour.2013.11.003
28. Shan-Lin
Zhang, Cheng-Xin Li*, Chang-Jiu Li Chemical compatibility
and properties of suspension plasma-sprayed SrTiO3-based anodes for
intermediate-temperature solid oxide fuel cells， Journal of
Power Sources, 2014, 264, 195-205
29.Shan-Lin Zhang, Cheng-Xin
Li*, Chang-Jiu Li, Plasma-Sprayed YSZ Electrolyte with Improved
Inter-Lamellar Bonding for Direct Application to Solid Oxide Fuel Cells,
Journal of Fuel Cell Science and Technology, 2014, 11(3),
031005-1-6, doi:10.1115/1.4026143
30.Ying-Zhen Hu, Cheng-Xin
Li*, Guan-Jun Yang, Chang-Jiu Li, Evolution of microstructure during
annealing of Mn1.5Co1.5O4 spinel coatings deposited by atmospheric plasma
spray,International Journal of Hydrogen Energy, 2014, 39(25),
13844-13851
31. Xue-Long
He, Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Sheng-Qiang
Fan, Room temperature cold sprayed TiO2 scattering layer for high
performance and bending resistant plastic-based dye-sensitized solar cells,
Journal of Power Sources, 2014, 251, 122–129, 10.1016/j.jpowsour.2013.11.003
32. Xue-Long He,
Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Influence of
accelerating gas flow rate on the particle cohesion in room temperature cold
sprayed scattering layer for plastic-based dye-sensitized solar cells, Applied
Surface Science, 288,416–422, 10.1016/j.apsusc.2013.10.049
33. Hui Dong,
Guan-Jun Yang, Cheng-Xin Li, Xiao-Tao Luo, Chang-Jiu Li, Effect
of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma-Sprayed
TBCs, Journal of American Ceramic Society, 2014, 97(4), 1226–1232,
DOI: 10.1111/jace.12868
34. Hai-Long Yao,
Jun-Hua Ma, Guan-Jun Yang, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin
Li, Chang-Jiu Li, Nano-Porous TiO2 Layer Using Ultrafine Nano-Particles
for the Blocking Layer in Dye-Sensitized Solar Cells, Journal of
Nanoscience and Nanotechnology,2014, 14(4), 2829-2835,
dx.doi.org/10.1166/jnn.2014.8602
35. Chang-Jiu Li,
Yong Li, Guan-Jun Yang, and Cheng-Xin Li, Evolution of
Lamellar Interface Cracks During Isothermal Cyclic Test of Plasma-Sprayed 8YSZ
Coating with a Columnar-Structured YSZ Interlayer, Journal of Thermal Spray
Technology, 22(8), 1374-1382, December 2013 10.1007/s11666-013-9965-0
36. Cheng-Xin
Li, Zhun-Zhun Wang, Shuai Liu, Chang-Jiu Li, Effect of Gas
Pressure on Polarization of SOFC Cathode Prepared by Plasma Spray, Journal of
Thermal Spray Technology, 22(5), 2013, 640-645
37. Shan-Lin
Zhang, Cheng-Xin Li*, Chang-Jiu Li, Guan-Jun Yang, Zhi-Hai
Han, Scandia-Stabilized Zirconia Electrolyte with Improved
Interlamellar Bonding by High-Velocity Plasma Spraying for High Performance
Solid Oxide Fuel Cells, Journal of Power Sources, 2013, 232, 123-131.
38. Hai-Long Yao,
Guan-Jun Yang, Shan Li, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li,
Chang-Jiu Li, Synergistic effects of high temperature and impact compaction on
the nano-TiO2 film for the significant improvement of photovoltaic performance
of flexible dye-sensitized solar cells, Electrochimica Acta, 2013, 87, 940–947,
doi:10.1016/j.electacta.2012.09.055
39. Guan-Jun Yang,
Chang-Jiu Li, Cheng-Xin Li, Katsuyoshi Kondoh, Akira Ohmori,
Improvement of Adhesion and Cohesion in Plasma-Sprayed Ceramic Coatings by
Heterogeneous Modification of Nonbonded Lamellar Interface Using High Strength
Adhesive Infiltration, Journal of Thermal Spray Technology, 2013, 22(1),
36-47, DOI: 10.1007/s11666-012-9831-5
40. Guan-Jun Yang, Cheng-Xin
Li, Shun Hao, Ya-Zhe Xing, Er-Juan Yang, Chang-Jiu Li, Critical bonding
temperature for the splat bonding formation during plasma spraying of ceramic
materials, Surface and Coatings Technology, 2013, 235, 841–847,
doi:10.1016/j.surfcoat.2013.09.010
41. Li-Hui Tian, Cheng-Xin
Li*, Guan-Jun Yang, Chang-Jiu Li, Effect of TiC addition and
high-temperature annealing on the microstructure and electrical conductivity of
shrouded-plasma-sprayed FeAl and FeAl/TiC coatings, Journal of Power Sources
2013, 233, 394-400
42. Chang-Jiu Li,
Guan-Jun Yang, Cheng-Xin Li, Development of particle
interface bonding in thermal spray coatings: A Review, Journal of thermal spray
technology, 2013, 22(2-3), 192-206, 10.1007/s11666-012-9864-9
43. Guan-Jun Yang,
Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Simultaneous
strengthening and toughening effects in WC-(nanoWC-Co), Scripta Materialia,
2012, Vol.66, 777-780.
44. Guan-Jun Yang,
Kai-Xing Liao, Chang-Jiu Li, Sheng-Qiang Fan, Cheng-Xin Li,
Shan Li, Formation of pore structure and its influence on the mass
transport property of vacuum cold sprayed TiO2 coatings using strengthened
nanostructured powder , Journal of Thermal Spray Technology, 2012, Vol.21,
505-513
45. Guan-Jun Yang,
Xu-Dong Xiang, Lu-Kuo Xing, Ding-Jun Li, Chang-Jiu Li, Cheng-Xin Li,
Isothermal oxidation behavior of NiCoCrAlTaY coating deposited by high velocity
air-fuel spraying, Journal of Thermal Spray Technology, 2012, Vol.21, 391-399
46. Chang-Jiu Li,
Yong Li, Guan-Jun Yang, Cheng-Xin Li, A novel plasma-sprayed
durable thermal barrier coating with the well-bonded YSZ interlayer between
porous YSZ and bond coat, Journal of Thermal Spray Technology, 2012, Vol.21,
383-390
47. ChengXin
Li, GuanJun Yang, ChangJiu Li, Influence of atmospheric plasma-sprayed
composite cathode on the performance of solid fuel cells, Rare Metals Materials
and Engineering, 2012, 41(S1), 448-452.
48. Xue-Long He,
Mei Liu, Guan-JunYangJ, Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li,
Preparation of flexible Pt counter elctrode on indium-doped tin oxide coated
polyethylene naphthalate for dye-sensitized solar cells, Rare Metals Materials
and Engineering, 2011, Rare Metals Materials and Engineering, 2012,
41(S1), 464-466
49. Guan-Jun Yang,
Xiao-Hu Kang, Cheng-Xin Li, Chang-Jiu Li, Influence of
deposition temperature on the splat bonding and mechanical properties of
plasma-sprayed tungsten coatings, Rare Metals Materials and Engineering, 2012,
41(S1), 394-398
50. Li-Hui Tian, Cheng-Xin
Li, Guan-Jun Yang, Chang-Jiu Li, Formation of Iron-aluminide Coating
through Annealing of Shrouded Plasma-sprayed Iron/aluminum Composite, Rare
Metals Materials and Engineering, 2012 , Rare Metals Materials and
Engineering, 2012, 41(S1), 367-471
51. Cheng-Xin
Li, Liang-Liang Yun, Yang Zhang, Chang-Jiu Li, Lie-Jin Guo, Microstructure,
Performance and Stability of Ni/Al2O3 cermet-supported
SOFC operating with coal-based syngas produced using supercritical water,
International Journal of Hydrogen Energy, 2012, Vol.37, pp.13001-13006
52. Cheng-Xin
Li, Shuai Liu, Yang Zhang, Chang-Jiu Li, Characterization of the
Microstructure and Electrochemical Behavior of Sm0.7Sr0.3Co3-δ Cathode
Deposited by Solution Precursor Plasma Spraying, International Journal of
Hydrogen Energy, 2012, Vol.37, pp.13097-13102
53. Xiao-Ming Wang, Cheng-Xin
Li, Chang-Jiu Li, Guan-Jun Yang, Microstructure and polarization of
La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying,
International Journal of Hydrogen Energy, 2012, Vol.37, pp.13879-12885
54. Biao Chen,
Chang-Jiu Li, Guan-Jun Yang, Jian-Tao Yao, Hui-Bin Huo, Cheng-Xin Li,
Fabrication of Porous Molybdenum by Controlling Spray Particle State, Journal
of Thermal Spray Technology, 2012, Vol.21, pp 1032-1045
55. Tian Lihui, Li Cheng-Xin
Li, Li Changjiu, Yang Guanjun, Effect of Dispersed TiC Content on the
Microstructure and Thermal Expansion Behavior of Shrouded-Plasma-Sprayed
FeAl/TiC Composite Coatings, Journal of Thermal Spray Technology, 2012,
21(3-4), p689-694. ( SCI: 544PT)
56. Shan-Lin
Zhang, Cheng-Xin Li*, Chang-Jiu Li, and Guan-Jun Yang,
Microstructure and Properties of Porous Ni50Cr50-Al2O3 Cermet Support for Solid
Oxide Fuel Cells，Journal of Thermal
Spray Technology, 158, 22(2-3), 2012,158-165
57. Guan-Jun Yang,
Hong-Tao Wang, Chang-Jiu Li, Cheng-Xin Li, Effect of
annealing on the microstructure and erosion performance of cold-sprayed FeAl
intermetallic coatings, Surface and Coatings Technology, 205 (2011) 5502-5509.
58. Changjiu Li,
Yong Li, Lukuo Xing, Guanjun Yang, Chengxin Li,
Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High
Temperature Oxidation Behavior, Materials Science Forum, Vol.686, 2011, p.595-602.
DOI: 10.4028/www.scientific.net/MSF.686.595
59. Guan-Jun Yang,
Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Layer-by-layer
fabrication of multiple-dye-sensitized TiO2 films for
dye-sensitized solar cells by vacuum cold spray, Nanoscience and Nanotechnology
Letters (NNL), Vol.3(No.4), 2011, 483-486
60. Xiao-Ming
Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang,
Microstructure and electrochemical behavior of La0.8Sr0.2MnO3 deposited
by solution precursor plasma spraying, Rare metal materials and engineering,
2011, 40(11), p1811-1886
61. Xiao-Ming
Wang, Cheng-Xin Li, Chang-Jiu Li, and Guan-Jun Yang,
Microstructure and electrochemical behavior of a structured
electrolyte/LSM-Cathode interface modified by flame spraying for solid oxide
fuel cell application, Journal of Thermal Spray Technology, 2010, 19(1-2),
p311-316. ( SCI: 544PT)
62. Yong Li,
Chang-Jiu Li, Qiang Zhang, Guan-Jun Yang, Cheng-Xin Li,
Influence of TGO composition on the thermal shock lifetime of thermal barrier
coatings with cold-sprayed MCrAlY bond coat, Journal of Thermal Spray
Technology, 2010, 19(1-2), p168-177. ( SCI: 544PT)
63. Pei-Hu
Gao, Chang-Jiu Li, Guan-Jun Yang, Yi-Gong Li, Cheng-Xin Li, Influence
of substrate hardness transition on built-up of nanostructured WC-12Co by cold
spraying, Applied Surface Science, 2008, 256(7), p2263-2268. ( SCI: 544PB)
64. Xiao-Ming
Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of
microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited
by suspension plasma spraying, International Journal of Hydrogen Energy, 2010,
35(7), p3152-3158. ( SCI: 583QF)
65. Cheng-Xin
Li, Chang-Jiu Li, Lie-Jin Guo, Effect of composition of NiO/YSZ anode
on the polarization characteristics of SOFC fabricated by atmospheric plasma
spraying, International Journal of Hydrogen Energy, 2010, 35, p2904-2908. (
SCI: 583QF)
66. Cheng-Xin
Li, Chang-Jiu Li, Lie-Jin Guo, Performance of a Ni/Al2O3 cermet-supported
tubular solid oxide fuel cell operating with biomass-based syngas through
supercritical water, International Journal of Hydrogen Energy, 2010, 35,
p2964-2969. ( SCI: 583QF)
67. Chang-Jiu Li,
Xin-Kun Suo, Guan-Jun Yang, Cheng-Xin Li, Influence of
annealing on the microstructure and wear performance of diamond/NiCrAl
composite coating deposited through cold spraying, Materials Science Forum,
2010, 638-642, p894-899. ( SCI: BQH93)
68. Qiang Zhang,
Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Effect of
powder structure on microstructure of the oxide scales formed on cold-sprayed
NiCrAlY coatings, International Journal of Modern Phuysics B, 2010, 24(15-16),
p3041-3046. ( SCI:654UT)
69. Yong Li,
Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Relationg between
microstructure and thermal conductivity of plasma-sprayed 8YSZ coating,
International Journal of Modern Phuysics B, 2010, 24(15-16), p3017-3022. (
SCI:654UT)
