[47] S-C Xu, N-L Zhang, J-F Yang, B Wang, C-Y Kim, Silicon carbide-based
foams derived from foamed SiC-filled phenolic resin by reactive infiltration of
silicon, Ceramics International,
2016.
[46] D-J Zeng, H Zhang, J-F Yang, B Wang, L Zhang, Microstructure and
property of porous mullites with a whiskers framework obtained by a sol-gel
process, Ceramics International,
42(2016)11270-11274.
[45] D-J Zeng, Y-M Zhang, J-F Yang, B Wang, J Matsushita, Fabrication and
Property of Mullite Whiskers Frameworks with an Ultrahigh Porosity by
Expandable Mesocarbon Microbeads, Journal
of the American Ceramic Society, 99 [7] (2016) 2226-2228.
[44] S, Song, C Bao, B Wang, Effect of the addition of carbon fibres on the
microstructure andmechanical properties of reaction bonded B4C/SiC composites, Journal of the European Ceramic Society,
36 (2016) 1905-1913.
[43] X Yang, J Bai, W Jing, B Wang, J Yang, Strengthening of
low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation of
cBN abrasives, Ceramics International,
42(2016) 9283-9286.
2015年
[42] H-H- Zhang, Y-L Xu, B Wang, X Zhang, J-F Yang, K Niihara,
Effects of Heating Rate on the Microstructure and Mechanical Properties of
Rapid Vacuum Sintered Translucent Alumina. Ceramics
International, 41(2015)12499–12503
[41] H Zhang, Z He, Y Zhang, W Jing, B Wang, J-F Yang, Lithium Disilicate
Glass-Ceramics by Heat Treatment of Lithium Metasilicate Glass-Ceramics
Obtained by Hot Pressing, Journal of the
American Ceramic Society, 98[12]
(2015) 3659-3662.
[40] B
Wang, Z-Y Xu, F Jin, J-F Yang, K Ishizaki. Synthesis of rod-like β-Si3N4
seed crystals with tailored morphogy. Ceramics International,
41(2015)5348–5354.
[39] H Zhang, Y Zhang, B Wang, J Yang. Preparation and characterization of continuous
alumina based fiber reinforced with orientated mullite whisker, Chemical Engineering Journal, 268(2015)109-115.
[38] B
Wang, H Zhang, F Jin, J-F Yang.Gas Permeability and Adsorbability of the
Glass-bonded Porous Silicon Carbide Ceramics with Controlled Pore size. Ceramics
International, 41(2015) 2279–2285.
[37] T Zhao, Y Qin, B Wang*, J Yang*. Improved densification and properties of
pressureless-sintered lithium disilicate glass-ceramics, Materials Science and Engineering A, 620(2015) 399–406.
[36] T Zhao, Y Qin, B Wang, J-F Yang. Comparative Study of Hydrogen and Argon Dilution Effects in Amorphous
SiC Thin Films Deposited by Plasma Enhanced Chemical Vapor Deposition. Journal of Nanoscience and Nanotechnology, 15 (2015)7371-7375.
[35] Y Qin, T Zhao, B Wang, J-F Yang. Deposition
Time Dependent Size of Si Quantum Dots Embedded in Amorphous SiC Matrix. Journal of Nanoscience and Nanotechnology, 15 (2015)7346-7350.
[34] D Zeng, H Zhang, B Wang,
K Sang, J Yang. Effect of Ammonia
Concentration on Silica Spheres Morphology and Solution Hydroxyl Concentration
in Stober Process. Journal of
Nanoscience and Nanotechnology, 15 (2015)7407-7411.
[33] K Zhang, HY Xia, B Wang, ZQ Shi, XZ Zhang, GW Liu, GJ Qiao. Preparation and
Thermal-Physical Properties of Three Dimensional Bicontinuous SiC/Cu-Si
Composite. Materials Science Forum,
804 (2015)187~190.
2014年
[32] T Zhao, Y Qin, T Wu, B Wang, J Yang, Effect of Particle Size
on the Sintering Behavior, Microstructure and Flexural Strength of Lithium
Disilicate Glass-Ceramics, Rare Metal
Materials and Engineering, 43[S1]
(2014) 024-028.
[31] B
Wang, X-H Yang, D-J Zeng, J-F Yang, K Ishizaki, K Niihara. Effect of glassy
bonding materials on the properties of LAS/SiC porous ceramics with near zero
thermal expansion. Journal of the
European Ceramic Society, 34(2014)91-95.
[30] B
Wang, Y Qin, F Jin, J-F Yang, K Ishizaki. Pulse Electric Current Sintering
of Cubic Boron Nitride/Tungsten Carbide-Cobalt (cBN/WC-Co) Composites: Effect
of cBN Particle Size and Volume Fraction on their Microstructure and
Properties, Materials Science and
Engineering A, 607(2014) 490-497.
[29] B
Wang, Z-Y Xu, W-Z Lu, F Jin, J-F Yang, K Niihara. Effect of Porous Si3N4
Preforms on the Mechanical Properties of Si3N4/Al Composites with Interpenetrating
Network Structure, Materials Science and
Engineering A, 607(2014) 307-312.
[28] B
Wang, S-C Xu, F Jin, J-F Yang, K Ishizaki, K Niihara. Effect of LiAlSiO4 particle size on the
properties of LAS/SiC porous ceramics with near zero thermal expansion. Ceramics International,
40(2014)2853-2856.
[27] Y Qin, T Zhao, B Wang*, P Zhang, J Yang*, Development of transverse thermoelectric
voltage effect in artificial SrTiO3/SrTi1-xNbxO3 epitaxial multilayer films
with incline-oriented sublayers, CrystEngComm,
16(2014) 5345-5351.
[26] Z Xu, B Wang, J Yang, Z Zhao. Preparation of Porous Si3N4 Ceramics with
Controlled Porosity and Microstructure by Fibrous α-Si3N4 Addition, Journal of the American Ceramic Society, 97[11] (2014)3392–3395.
[25] T Zhao, Y Qin, P Zhang, B Wang,
J-F Yang. High-performance, reaction sintered lithium disilicate
glass-ceramics. Ceramics International,
40(2014) 12449-12457.
[24] HH Zhang, Y Hang, Y Qin, JF Yang, B Wang. Synthesis and characterization
of sol–gel derived continuous spinning alumina based fibers with silica
nano-powders. Journal of the European
Ceramic Society, 34(2014)465–473.
[23] HH Zhang, DJ Zeng, B Wang, JF Yang. Preparation and
characteristics of spinnable sol and continuous mullite fibers with nano silica
addition. Journal of Sol-Gel Science and
Technology, 69(2014)311-319.
[22] 秦毅, 赵婷, 王波, 杨建峰. PECVD沉积和原味退火时间对h-BN薄膜组成及光学带隙的影响. 无机材料学报,
29 (2014)729-734 .
[21] 张俊熙，徐照芸，王波，秦毅，杨建锋，氮气压力对多孔氮化硅陶瓷显微结构组织和力学性能的影响，无机材料学报，29
(2014)701-705.
2013年
[20] Y Qin, T Zhao H-H Zhang, B Wang,
P-X Zhang, J-F Yang. Large transverse thermoelectric voltage effect in
incline-oriented SrTi1-xNbxO3 films with cubic structure. Applied Physics Letters, 102(2013) 253901.
[19] 王波，徐少春，徐照芸，杨建锋. 近零膨胀多孔SiC/LAS 陶瓷材料的制备与性能. 功能材料, 增刊1(
2013)1001-1560.
2012年
[18] B
Wang, K Matsumaru, J. Yang, Z. Fu,
K. Ishizaki. Mechanical behavior of
cellular borosilicate glass with pressurized Ar-filled closed pores. Acta Materialia, 60(2012)4185-4193.
[17] B
Wang, K Matsumaru, J. Yang, Z. Fu, K. Ishizaki. The Effect of cBN Additions
on Densification, Microstructure and Properties of WC-Co Composites by Pulse
Electric Current Sintering. Journal of
the American Ceramic Society, 95 (2012) 2499-2503.
2011年
[16] B
Wang, R Hanawa, J Yang, K Matsumaru, K Ishizaki. Influence of gas pressure
on the surface composition of capsule-free HIPed borosilicate glass. IOP
Conference Series: Materials Science and
Engineering, 20(2011) 012011.
[15] B
Wang, K Matsumaru, H Ishiyama, J Yang, K Ishizaki, J Matsushita. Low
temperature oxidation of Titanium nitride under high oxygen pressure by O2-HIP. Advances in Technology of Materials and
Materials Processing Journal (ATM) 13 (2011) 7-13.
[14] B
Wang, K Matsumaru, J Yang, K Ishizaki. High strength borosilicate foams by
expansion of Ar-filled pores and release of dissolved Ar gas. Advances in Technology of Materials and
Materials Processing Journal (ATM) 13 (2011) 24-29.
[13] PY. Dai, Y.Z. Wang, G.L. Liu, B Wang, Y.G. Shi, J.F.Yang, G.J. Qiao,
H.J. Wang. Fabrication of highly dense pure SiC ceramics via the HTPVT method. Acta Materialia, 59(2011)6257-6263.
[12] C Chen, C Chu, J Yang, C Bao, G Qiao,
D Tian, B Wang, K Ishizaki, K
Niihara. Effect of raw materials on microstructure and bending strength of
porous in situ MgO/Fe–Cr–Ni composites. Materials
Science and Engineering A, 528(2011)8438-8442.
2010年
[11] B
Wang, K Banzai, N Kuribayashi, J Yang, K Matsumaru, K Ishizaki.
Microstructure and properties of c-BN dispersed WC composites. Advances in Technology of Materials and
Materials Processing Journal (ATM), 12 (2010) 58-63.
[10] B
Wang, J Yang, J Gao, K Niihara. Fabrication of Barium Aluminosilication
-Silicon Nitride-Carbon Nanotube Composites By Pressureless Sintering. Ceramic Transactions, 2010, 257-264.
